All

When did Evil last release a new bike? been a while hasn't it?

if it's been said already, sorry, i didn't read all the replies yet. by far, the easiest thing to do would be to have judging anonymous (like surfing and other sports) 7 judges, each with an anonymous score, highest and lowest thrown out. every judged can have access to replay. scores be damned, the whole week+ was an insane showcase of ludicrous bicycle riding.

Phoebe Gale’s mechanic showing an Orbea ebike on his insta story, supports rumours of FMD —> Orbea

I shot TRP this question yesterday as well and they got back to me with this: " We do have some longer pushrods available here (9mm of thread): https://trpcycling.com/products/dh-r-evo-lever-small-parts?variant=4785… We’d recommend checking your current pushrod thread length before purchasing as they may be our 7mm or 9mm depending on when they were purchased. There is also an aftermarket company called Freedom Coast Cycling that makes CNC’d lever blades for our brakes if you need them even closer." When you click the link it doesn't specify 7mm or 9mm pushrod so I'm guessing that the new ones are 9mm. For $10/brake...

Hey there! I just made an account to answer this There actually is an option. You need to disassemble the lever and remove the pushrod. This video shows how to remove the lever. Follow the procedure up until 3:00 where he unthreads the lever from the pushrod. The pushrod is secured by a little washer and a circlip that sits in a groove inside the lever. Remove the circlip to get the pushrod out. Now you can cut the thread on the pushrod a little bit further using an M4*0.7 thread cutting die. Reassemble according to instructions in reverse...

Reece Wilson creating his own team apparently being gamux bikes and getting heaps of funding from somewhere out of industry Seems loris and Benoit to commencal with a huge commencal team being formed with all muc off riders too Ellie Hulsebosch has signed with syndicate for next year, Felix Griffiths also signed Stevens mcnabb to trek Anna Newkirk to frameworks Also unior sinter apparently loosing trek and riders just riding their own bikes

Can finally talk about it publicly Asa on Red Bull 🙌🏽

is it the one with the links and bits cut out? 🤣 kidding

That’s Ellie Hulsebosch with Syndicate.

looks like a bear

Think of a former gun manufacturer close to Portugal.

This ties into what I was thinking. I've been mulling about that Atherton could become FMD's bike sponsor. Tahnee ends up on Atherton, as was rumoured, but she stays with the family program, and it works with Tony Seagraves' excited 'new bike' claims, provided he wasn't being sneaky and just indicating the whole team was going to be on the new Canyon bike.

Bold New Graphics

I super appreciate the number of product engineers we have in this forum. There's also PMs from brands and sales guys like me. Great to interact with super knowledgeable consumers and riders. BTW, I was looking at the fork the other day. As technical of a product the fork is, I was a little surprised not to see some common details listed on the website. I couldn't for the life of me verify it was 15mm axle, didn't see A2C lengths or fork offset. Might not hurt to add some specs to the page.

I'll also add, there's so much dogma in the bike industry, you can't do X because it has such bad Y...etc. We're not totally impervious to this thinking, but with this project we made it a point to actually test these assertions and sort fact from fiction. An example, from the start I felt we had to do a 20mm axle because everyone says so, it was Darren that commented how much it sucks to get a new fork and then realize your wheel doesn't work with it. So we tested and found the diameter has much less influence compared...

I am in the engineering department at Push, and we're all big fans of the Vital community! - Matt I guess I should prefaced that manufacturing comment, before I get the "my buddy owns a casting shop and ..." 😂 So for starters there aren't many magnesium casting suppliers in the US (probably because of safety issues 🔥) but funny enough there is one just down the street from us. The problem with most US manufacturers is size, difficulty, volume, and capacity all have to align before they are interested in any new work. In my experience this is fundamentally...

Maybe you could call yourself the winner of Giro d'Italia, Tour de France, the world championsips and a bunch more races if you ran shorter cranks (Pogačar runs 165 mm cranks.)

For simplicities sake I'll be using the king crab's pricing from this site: https://fishmanmkt.com/pages/market-prices WeAreOne: 39.53 lbs - $1976.10 Intense: 41.8 lbs lbs - $2089.58 Greg's Norco: 45.15 lbs - $2257.04 Gracie's Norco: 43.28 lbs - $2163.56 Transition: 39.37 lbs - $1968.10 Trek: 42.57 lbs - $2128.92 Giant: 39.29 lbs - $1964.10 Crestline - 39.88 lbs - $1993.60 Atherton - 40.32 lbs - $2015.59 Gamux - 44.62 lbs - $2230.55 Pivot - 36.38 lbs - $1818.63 Personally I'd love to pay crab pricing rather than the pricing we have now. Which of these athletes would consider trading to me their...