Recent Activity

All

Krispy Liked a reply to forum topic MTB Tech Rumors and Innovation

3/6/2023 12:59pm
Regarding the 2023 Super Deluxe, Disclaimer- I don't have dyno readings ;-) I've had the good fortune of receiving support from Rockshox for my race team 'RaceKraft' which is a Jr Devo team. We have 6 bikes set up with the Super Deluxe Ultimate Coil. I'm a total shock nerd and have spent some time revalving these shocks for my riders. We've only had a couple of trips to the desert and to race Bootleg a few weeks ago. First off, the architecture of these things is rad. It's pretty clear that durability was a major focus. The shock shaft...
This forum topic has 30444 replies.

lewzz10 Liked a reply to forum topic UCI grant Discovery WC rights from 2023 to 2030

3/1/2023 8:48pm
EDR is just the 3 letter acronym for enduro. Downhill is DHI, Cross country XCC, XCO, XCE, XCM... This is just a short form to appear on results sheets/quickly differentiate between similar disciplines (especially in XC), even the UCI don't refer to downhill solely as DHI, I don't understand why people are getting torn up over it.
This forum topic has 782 replies.

hardbash Liked a reply to forum topic MTB Tech Rumors and Innovation

2/28/2023 9:03am
Santa Cruz acting like they make some high quality frames because they don't glue in liners but at the same time show a void in their carbon which the unnamed frame does not have. The glued in liners might not be pretty, but at least they don't play a part in the frame's integrity
This forum topic has 30444 replies.

FuckingSteve Liked a reply to forum topic MTB Tech Rumors and Innovation

2/28/2023 9:02am
Oh the through-frame cable routing is made of carbon, well I guess that explains why they’re so much fucking money. Who cares?
This forum topic has 30444 replies.

JVP Added a comment about feature Vital MTB Face Off: The Best Flat Pedals

2/28/2023 7:42am
The DMR bushings are literally soft plastic. Not good plastic like IGUS, but cheap, soft plastic. Easy to replace, but buy them in packs of 4 or 6 since they wear out super fast compared to other pedals and replacement bushings sometimes are out of stock everywhere. The bigger issue is their axles bend easily. The pedal bodies are good quality, but all the internals and axles are super cheap junk. If you're not an axle-bender, then they're probably fine. Deity uses higher quality axles with better heat treating. You can also buy individual axles - if you're like me...
Votes:
1
This feature has 153 comments.

Hikers Only Liked a comment about Feature Vital MTB Face Off: The Best Flat Pedals

2/28/2023 7:32am
I liked the grip of the Vaults but the reliability was pretty poor. Developed play after a short period so rebuilt and the same thing happened! They are now in the pedal drawer as a back up. Currently trying a set of 5 Dev enduro pedals on one bike and e13 alloy pedals on another.
This feature has 153 comments.

dirty booger Liked a reply to forum topic Transition Factory Racing is Here

2/21/2023 8:34am
Rad with all the ladies on board! Nice job Lars and crew.
This forum topic has 8 replies.

sspomer Liked a forum topic Transition Factory Racing is Here

2/21/2023 8:34am
World Cup Downhill Race and Development Program We are beyond stoked to announce the Transition Factory Racing UCI DHI team. Transition Bikes, SRAM / Rockshox, One Up Components, ION, SMITH, Crankbrothers, Maxxis, Mutt Society, Mountain Creek Bike Park, SDG, Unior Tools, and Cushcore have teamed up to create the perfect collection of riders, partners, and equipment to tackle the pinnacle of downhill racing. Tristan Lemire. Transition Factory Racings first year elite male comes from prime DH heritage. Having raced the last few seasons amongst some of the world's most elite racers, Tristan brings a wealth of knowledge and experience to...
This forum topic has 8 replies.

JVP Added a reply to MRP - Questions if you have ridden them

2/20/2023 5:59pm
I pulled the trigger on a Ribbon 140 for the Norco Optic I just picked up. Got a couple good and varied rides on it so far, and can confirm that it's as good as any fork I've ridden. Even felt good just above freezing, which is impressive. I'm 195 lbs and my other fork is a Mezzer 170 on...

LookinForIt Liked a reply to forum topic Jack Moir Trying Size Large Rear End on XL Capra

2/15/2023 9:33pm
I do like to think about how other sports influence riding styles. Personally I grew up skiing, and always was encouraged to be "in the middle of the camber" so I'm used to being in the middle of my "traction points". Since, I've preferred a more balanced and centred position on the bike. If a rider has no other sport's influence, how do they ride? If a child is never spoken to, what language would they speak?
This forum topic has 17 replies.

JVP Added a reply to What Do You Use For Off-Season Training?

2/15/2023 5:38pm
Oh yeah, my banh mi have become a dig day tradition that I love doing. I'll definitely be sponsoring a day or two where I make up a huge batch of slow cooked lemongrass pork and pickled carrot/daikon to spoil the crew with tasty sandwiches.

whitesq Liked a reply to forum topic MTB Tech Rumors and Innovation

2/15/2023 5:01pm
Listened to a bit of the Ride Along podcast and realized Team Robot was clearly trying to send us a hidden message in the photo!!! The hands are a dead give away! One is clearly the NC State wolfpack gesture which is a similar species to a fox (aka Fox Factory). The other hand is in a rock-on gesture, so obviously Rockshox. Only “V” on his shirt is visible, which doesn’t mean anything, but when you combine it with the “DC” it forms “VDC” the abbreviation for voltage direct current which is the basis for any battery powered device, including...
This forum topic has 30444 replies.

JVP Added a reply to Bring back Velcro!

2/15/2023 4:19pm
^^ This! I have narrow forefoot with a craaazy high instep. Flats I'm OK just running laces fairly loose (with thicker socks), but clips on MTB or road need each section of the shoe to be snugged separately or my circulation gets cut off. I'm staunchly anti-velcro on any other bit of clothing, but love it for shoes.

LookinForIt Liked a reply to forum topic Bring back Velcro!

2/15/2023 4:04pm
My issue with systems like BOA or single-velcro shoes is that I like to be able to adjust tension across my foot. I tend to experiment with lacing patterns, and for longer rides I like to have a looser toe-box than for pedal-and-plunge rides. Velcro needs to be 3 straps, otherwise laces are my top pick. I tend to have issues with BOA for all the reasons stated in OP, but also in longevity as the BOA wire cut through the parts of the shoe meant to hold it on. Finally, the BOA shoes I had were made with some...
This forum topic has 39 replies.

newBikeInACan Liked a reply to forum topic What Do You Use For Off-Season Training?

2/15/2023 3:56pm
Those eff'ing thai sandwiches tho... so good
This forum topic has 23 replies.

Primoz Liked a reply to forum topic MTB Tech Rumors and Innovation

1/23/2023 3:13pm
Less refined too. I sincerely hope they stay on DOT fluid as long as the brakes are as good as they are. I don't want to deal with some proprietary baby oil fluid...
This forum topic has 30444 replies.

FullSend Liked a reply to forum topic MTB Tech Rumors and Innovation

1/23/2023 3:06pm
They better be. Should be standard on literally every single bike in existence. So far only Canyon managed to get it right.
This forum topic has 30444 replies.
I had 3 springs tested by my suspension tuner. Fox Steel 500lb measured 480lb Fox SLS 475 measured 435lb Fox SLS 450 measured 452lb So with that said, I don’t trust any label on a spring unless it’s verified. Hit up Ryan at Fluid Focus in Temecula CA. You can prob get a spring that is tested at the rate you are looking for.
This forum topic has 6 replies.