Recent Activity
All
maximumradness Liked a reply to forum topic Dumb Bike Problems
6/13/2025 8:48am
X2.
This forum topic has 298 replies.
Goupil Added a reply to Dumb Bike Problems
6/13/2025 8:44am Multiple times i have reinstalled/replaced a Shimano 12V derailleur and spent a long time understanding why the chain length is suddenly all out of wack. The stupid little plastic spacer that goes between the B tension screw and hanger always end up on the wrong side of the hanger if you forget about it, and I often do...
ratchet_catch Liked a reply to forum topic Dumb Bike Problems
6/13/2025 8:39am
I got some new tires, inserts, tape, and sealant. Kryptotals, which ended up being some of the tightest beads I’ve ever tried to put on. Front went on well. Back broke two tire levers. The second broke as the tire went on, so I had to crack it open to get the lever piece out. Got some sealant in, and tried pumping it up. And tried again, and again and again and again. I couldn’t get it to seat. Let it sit in the sun, used some soapy water, everything. Finally, finally the bead was seated and it held air...
This forum topic has 298 replies.
Primoz Liked a reply to forum topic The Bikeconomics (Mega)Thread
6/13/2025 5:31am
Based off the cost for injection molding plastic tools in the west, I'd be surprised one single mold for a carbon bike in Asia is 250k. I'd say a set of molds to cover all the sizes and the production across a few model years will be 250k. The materials and QA comment was also correct, steel is quite foolproof and enables you to work quickly. With aluminium you have to be really careful cutting off the excess of plies at the parting line to not damage the mould's hard edge on the parting line. Then there are also other...
This forum topic has 5098 replies.
noideamtber Liked a reply to forum topic The Bikeconomics (Mega)Thread
6/12/2025 6:33am
Id like to believe they are using a cheaper mold, ie ones that are not designed to handle thousands of frames. I remember a video of some brand talking about the 3 different setups, 2 different molds, ones for more prototype style testing and other for big batches. 3rd being a mold that isnt IP owned by a brand but its infact owned by the factory... Theres usally a deal, after X amount of frames or years, the factory can use that mold for themselves(or similar, Cant remember the details fully)
This forum topic has 5098 replies.
ebruner Liked a reply to forum topic The Bikeconomics (Mega)Thread
6/12/2025 6:33am
I don't know with yeti in particular... but from a friend with industry knowledge that I spend a bunch of time with. He theorizes that many of the DH bikes that are carbon, yet not being brought to market, are being made on CNC'd aluminum prototype moulds. These are fine for limited production where you're doing hand QA/QC for each product and can monitor the mould for degradation and for overall accuracy. This is quite difficult to do with any sort of scaling and hence, why steel moulds are used for production. From what I understand, there are a few...
This forum topic has 5098 replies.
veefour Liked a reply to forum topic The Bikeconomics (Mega)Thread
6/12/2025 6:31am
Interesting read. I'll await further price increase announcements. 🤣 Taken from the article; “By operating as two distinct and optimized companies in the future, we are empowering these iconic brands with the sharper focus and strategic flexibility they need to compete most effectively in today’s evolving media landscape,” said David Zaslav, Warner Bros. Discovery’s president and chief executive, Hard to think of a better example of corporate speak. 🙄
This forum topic has 5098 replies.
GRM50 Liked a reply to forum topic MTB Tech Rumors and Innovation
6/12/2025 3:50am
Big PP and bigger PP lol
This forum topic has 30444 replies.
CaptainMetaSx Liked a reply to forum topic MTB Tech Rumors and Innovation
6/12/2025 3:50am
Few details about the new PP bikes : - Shan n°6 : 160mm enduro bike (n°5 has 140mm), 64.5° HA, 450mm CS length - Shan DH : no details but looking good with a similar layout but specific ratios.
This forum topic has 30444 replies.
kperras Liked a reply to forum topic E-MTBs That Are Also E-Motos - What's Going to Happen?
6/12/2025 2:37am
It's becoming quite clear in the race for more power, with the gap narrowing between e-mtbs and e-motos, that legislation will happen and certain categories of bikes will not be able to be sold without insurance. The danger here is, that due to the difficulty of differentiating between class 2 and beyond e-mtbs and class 1, class 1 e-mtbs will be lumped in with the rest and all e-mtbs will require some sort of insurance or licensing. This is the fear that is pushing the Europeans (backed by Bosch) to apply power limits to electric bikes or face legal consequences...
This forum topic has 93 replies.
TEAMROBOT Liked a comment about Feature Shimano Wireless XTR Di2 Six-Month Review
6/4/2025 2:34pm
Cool to know. The change to cartridge bearings blew my mind because I never thought that would change. I thought cockroaches and Shimano cup-and-cone hubs would be the only things left after the nuclear apocalypse.
This feature has 38 comments.
Poleczechy Liked a reply to forum topic MTB Tech Rumors and Innovation
6/3/2025 1:45pm
Yeti engineers when discussing how many bearings to use:
This forum topic has 30444 replies.
roost66 Liked a reply to forum topic MTB Tech Rumors and Innovation
6/2/2025 11:00pm
103.99 bcd
This forum topic has 30444 replies.
Explodo Liked a comment about Press Release Intend Introduces the One Piece Fork
6/2/2025 2:36pm
I wouldn't tell people I'd won the lottery, but there'd be signs.
This press release has 10 comments.
Brian_Peterson Liked a reply to forum topic MTB Tech Rumors and Innovation
5/31/2025 10:12pm
Saddle activated brake... If you sit down, you slow down...
This forum topic has 30444 replies.
ANDSHOCK SL Liked a bike check Production Privée Dirty Bandit
5/31/2025 1:49pm
This bike check has 2 comments.
Goupil Added a reply to Modern bike sizing (aka am I buying the wrong size bike)
5/30/2025 1:40pm How much of it is thinking one size fits all, and how much is figuring out the extra cost of size specific rear triangles isnt worth it for the few geometry nerds that would buy the bike under said condition ?
