I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in...
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in relation to the rear wheel no matter how tall you are. So you are helping the overall front to back balance of the bike but it will still feel differently than a smaller size if all else is equal.
I also think people put a little too much thought into some of these numbers, that's the beautiful thing about the human body between hips,knees and ankles we can really manipulate our body weight balance pretty efficiently.
100% ^^^ So many opinions on here presented as absolutes. Everything is a compromise and a skilled rider will compensate. I won't say it's impossible to make a "bad" bike these days, but it's pretty hard. Both of these bikes look pretty stellar to me.
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in...
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in relation to the rear wheel no matter how tall you are. So you are helping the overall front to back balance of the bike but it will still feel differently than a smaller size if all else is equal.
I also think people put a little too much thought into some of these numbers, that's the beautiful thing about the human body between hips,knees and ankles we can really manipulate our body weight balance pretty efficiently.
Man you’re right! Due to the magic of the human body geo doesn’t matter we can just adapt! Lol cmon bro that’s bad logic. if that were true it would work the other way ie you can make a cs as long as you want and the rider will adapt (actually it does kinda work that way, see reviews for high pivot bikes…)
The problem is that when you weight the pedals, the balance of front and rear center will determine where the force goes. Sure you can weight the front end on bikes with short cs, but that sucks.
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in...
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in relation to the rear wheel no matter how tall you are. So you are helping the overall front to back balance of the bike but it will still feel differently than a smaller size if all else is equal.
I also think people put a little too much thought into some of these numbers, that's the beautiful thing about the human body between hips,knees and ankles we can really manipulate our body weight balance pretty efficiently.
While that is true, if the front center grows without the rear center also growing, the weight distribution shifts more and more towards the rear.
This results in being forced to ride with more weight on your hands which is generally undesirable. IMO, your hands should mostly be used for controlling the bike and fore-aft stability, not for supporting your weight.
I’m 6’3” and find that many bikes with short CS and long reach force me into a riding position that I don’t like in order to place enough weight on the front wheel.
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in...
I dont think that longer chain stays for longer reaches necessarily makes the bikes handle similar proportionately. Your feet are still in the same spot in relation to the rear wheel no matter how tall you are. So you are helping the overall front to back balance of the bike but it will still feel differently than a smaller size if all else is equal.
I also think people put a little too much thought into some of these numbers, that's the beautiful thing about the human body between hips,knees and ankles we can really manipulate our body weight balance pretty efficiently.
100% ^^^ So many opinions on here presented as absolutes. Everything is a compromise and a skilled rider will compensate. I won't say it's impossible to...
100% ^^^ So many opinions on here presented as absolutes. Everything is a compromise and a skilled rider will compensate. I won't say it's impossible to make a "bad" bike these days, but it's pretty hard. Both of these bikes look pretty stellar to me.
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better. Saying “bikes don’t need to work better, the rider just needs to adapt” is 2012 cave man logic. We’re still working on finding a good balance between hta, reach, stack, bb height, and cs length. It’s hard. But saying it doesn’t matter, it’s just a lie. If ibis put 2012 geo on the new ripley you wouldn’t say “hey man hard to make a bad bike we will all just adapt” you would say hmm this geo looks a bit outdated, and 69* hta is actually kinda whack. So no, geo can be wrong and bad, and that’s ok, because we’re all working towards the goal of better handling bikes. It’s just a bummer for ibis because they didn’t get the memo about CS length. But we’re going to see a lot of brands getting it wrong (speci, etc.) it’s just harder for ibis because they made their front ends even longer!!!
How much does a complete bike weigh?
A size extra medium Ripley 5 frame with a Float shock weighs 7.3lbs / 3.3 kg. Our complete builds (size extra medium) begin at 29.43 lbs (13.3 kg) with all frame protection installed and sealant in the tires.
The Ripley of yesteryear is officially dead. No longer a light XC bike that could shred trails with 120mm. Now a 130mm bike that's pretty heavy and is actually the exact same frame as the Ripmo (just different clevis and shock between the two frames). This plus weird geo changes... Ibis trying to stay afloat/be profitable by selling two bikes with the same frame--just swapping a part and shock.
started in 2016, @jeff.brines ' "short chainstays suck" thread can live on.
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
There are always going to be people looking for progress and other people defending the status quo. Some people will see new bikes and say “great! Just like my old bike!” Others will say “dammit, just like my old bike.” I feel like discussing these points is worthwhile. I just think some of y’all don’t like being wrong
If we're sharing our wishlists, I'd like to suggest that everyone who makes an argument like "because physics" kindly show your work. On the topic of the sciences, the goal typically is the characterize the size of the difference. It's a tell whenever an argument takes the form of "less weight" or "more traction" (i.e. "A and B are different") must be better because if two things are different one is better than the other. There's a whole universe of real, detectable differences that are small enough to be meaningless with respect to some outcome people actually care about. Even when we're sure they must (they must! these Ti bolts weren't cheap!**) matter. It's not intuitive just where that transition lies.
**W = Fs & F= ma ∴ W = (ma)s ∴ less mass is less work, work less ride more brooooo! [rides into the sunset]
^^^ an example of what I think is not a good argument, in case that wasn't clear
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
There are always going to be people looking for progress and other people defending the status quo. Some people will see new bikes and say “great...
There are always going to be people looking for progress and other people defending the status quo. Some people will see new bikes and say “great! Just like my old bike!” Others will say “dammit, just like my old bike.” I feel like discussing these points is worthwhile. I just think some of y’all don’t like being wrong
I just think, "cool, new bike!"
Friggin love new bikes, and brakes, and forks, and shocks, hmmmmm tires, stems......Not helmets though, frig I could care less about new helmets....
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the line for many between opinion and fact and has created comfy echo chambers for us lazy animals. Or somethign like that.
Back to Ibis... it's commendable they tried to limit investment by reusing materials through the range, clearly the financial sting from the past few years is still there. But like what often happens, that middle ground is OK at everything and not great at any one thing.
Either alloy version of the new spectral or new torque... The torque while is good at freeride/big jumps, really needs a Park version thats less progressive IMO
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the...
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the line for many between opinion and fact and has created comfy echo chambers for us lazy animals. Or somethign like that.
Back to Ibis... it's commendable they tried to limit investment by reusing materials through the range, clearly the financial sting from the past few years is still there. But like what often happens, that middle ground is OK at everything and not great at any one thing.
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I swapped for a 5010 frame to race slalom. But the ability to use a 5mm longer stroke shock/fork air spring to turn it back into a Bronson made it the best of both worlds. With two different clevis and shock sizes I feel like the Ripmo/Ripley would be even better.
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I...
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I swapped for a 5010 frame to race slalom. But the ability to use a 5mm longer stroke shock/fork air spring to turn it back into a Bronson made it the best of both worlds. With two different clevis and shock sizes I feel like the Ripmo/Ripley would be even better.
I agree & while looking at geo charts I think me at 6ft could ride a large ripmo with a 170 fork and then happily adapt it to shorter travel being the ripley.
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the...
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the line for many between opinion and fact and has created comfy echo chambers for us lazy animals. Or somethign like that.
Back to Ibis... it's commendable they tried to limit investment by reusing materials through the range, clearly the financial sting from the past few years is still there. But like what often happens, that middle ground is OK at everything and not great at any one thing.
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I...
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I swapped for a 5010 frame to race slalom. But the ability to use a 5mm longer stroke shock/fork air spring to turn it back into a Bronson made it the best of both worlds. With two different clevis and shock sizes I feel like the Ripmo/Ripley would be even better.
The new Norco Sight is at the top of the list for me, it's 150mm rear takes a 205x60 shock stock, but it can take a 205x65 to bump it to 160mm. I currently have a bike running a 205x65 coil so I'm eying the alloy frameset since you get a Vivid Ultimate air and both shock mounts to run it mullet or full 29er.
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics...
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the...
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the line for many between opinion and fact and has created comfy echo chambers for us lazy animals. Or somethign like that.
Back to Ibis... it's commendable they tried to limit investment by reusing materials through the range, clearly the financial sting from the past few years is still there. But like what often happens, that middle ground is OK at everything and not great at any one thing.
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I...
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I swapped for a 5010 frame to race slalom. But the ability to use a 5mm longer stroke shock/fork air spring to turn it back into a Bronson made it the best of both worlds. With two different clevis and shock sizes I feel like the Ripmo/Ripley would be even better.
Why is it that the Gen 2 Bronson/5010 were so damn good for so many people, but we are so far away from that now? I had the bronson and felt like it was perfect in the middle, run light tires for XC/all mountain and then throw heavys on for DH laps. Miss that bike a bit too much.
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better...
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better. Saying “bikes don’t need to work better, the rider just needs to adapt” is 2012 cave man logic. We’re still working on finding a good balance between hta, reach, stack, bb height, and cs length. It’s hard. But saying it doesn’t matter, it’s just a lie. If ibis put 2012 geo on the new ripley you wouldn’t say “hey man hard to make a bad bike we will all just adapt” you would say hmm this geo looks a bit outdated, and 69* hta is actually kinda whack. So no, geo can be wrong and bad, and that’s ok, because we’re all working towards the goal of better handling bikes. It’s just a bummer for ibis because they didn’t get the memo about CS length. But we’re going to see a lot of brands getting it wrong (speci, etc.) it’s just harder for ibis because they made their front ends even longer!!!
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was also my initial impression but i was chatting to my local dealer about the new bike losing the chain stay adjustment that the stevo had and he informed me that bb high/low setting flip chip would still change chainstay length approx 7mm.
Can anyone actually confirm this is true? It makes sense but it doesn’t seem to be advertised anywhere nor have I found a chart for it.
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better...
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better. Saying “bikes don’t need to work better, the rider just needs to adapt” is 2012 cave man logic. We’re still working on finding a good balance between hta, reach, stack, bb height, and cs length. It’s hard. But saying it doesn’t matter, it’s just a lie. If ibis put 2012 geo on the new ripley you wouldn’t say “hey man hard to make a bad bike we will all just adapt” you would say hmm this geo looks a bit outdated, and 69* hta is actually kinda whack. So no, geo can be wrong and bad, and that’s ok, because we’re all working towards the goal of better handling bikes. It’s just a bummer for ibis because they didn’t get the memo about CS length. But we’re going to see a lot of brands getting it wrong (speci, etc.) it’s just harder for ibis because they made their front ends even longer!!!
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was...
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was also my initial impression but i was chatting to my local dealer about the new bike losing the chain stay adjustment that the stevo had and he informed me that bb high/low setting flip chip would still change chainstay length approx 7mm.
Can anyone actually confirm this is true? It makes sense but it doesn’t seem to be advertised anywhere nor have I found a chart for it.
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better...
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better. Saying “bikes don’t need to work better, the rider just needs to adapt” is 2012 cave man logic. We’re still working on finding a good balance between hta, reach, stack, bb height, and cs length. It’s hard. But saying it doesn’t matter, it’s just a lie. If ibis put 2012 geo on the new ripley you wouldn’t say “hey man hard to make a bad bike we will all just adapt” you would say hmm this geo looks a bit outdated, and 69* hta is actually kinda whack. So no, geo can be wrong and bad, and that’s ok, because we’re all working towards the goal of better handling bikes. It’s just a bummer for ibis because they didn’t get the memo about CS length. But we’re going to see a lot of brands getting it wrong (speci, etc.) it’s just harder for ibis because they made their front ends even longer!!!
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was...
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was also my initial impression but i was chatting to my local dealer about the new bike losing the chain stay adjustment that the stevo had and he informed me that bb high/low setting flip chip would still change chainstay length approx 7mm.
Can anyone actually confirm this is true? It makes sense but it doesn’t seem to be advertised anywhere nor have I found a chart for it.
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was...
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was also my initial impression but i was chatting to my local dealer about the new bike losing the chain stay adjustment that the stevo had and he informed me that bb high/low setting flip chip would still change chainstay length approx 7mm.
Can anyone actually confirm this is true? It makes sense but it doesn’t seem to be advertised anywhere nor have I found a chart for it.
Some folks on MTBR are talking about the Ibis Ripmo V3 dropping on 7/16. Anyone know if this is true? I hope its able to be...
Some folks on MTBR are talking about the Ibis Ripmo V3 dropping on 7/16. Anyone know if this is true? I hope its able to be setup as a solid enduro basher and not made into something too light. Who knows!
Apparently Ripmo and Ripley will be released together.
Ripley is said to have a bump in travel. Not sure which direction Ripmo is going to go...
Apparently Ripmo and Ripley will be released together.
Ripley is said to have a bump in travel. Not sure which direction Ripmo is going to go. Will be awesome to see how it compares to Stumpjumper 15 and hoping for aesthetics like the HD6
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting one), but it makes a ton of sense as well.
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting...
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting one), but it makes a ton of sense as well.
It makes a ton of sense from a manufacturers point of view. From a consumer standpoint less so. The compromises of using a shared frame may be small but they are there. If you were designing with a clean sheet I'm not sure you'd have a longer reach and steeper SA on the shorter travel version.
The whole we didn't see the point of proportional rear centres but we went to all the trouble of changing it anyway by a tiny amount is odd.
But we did vary the BB height between low-ish(36mm) and incredibly low(48mm!!-tbh I don't of any similar bike with that much drop). That is pretty huge and will have a big effect on handling.And the reason is........consistant roll over angle? Really?
Just some odd things.
Nice looking though.
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting...
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting one), but it makes a ton of sense as well.
It makes a ton of sense from a manufacturers point of view. From a consumer standpoint less so. The compromises of using a shared frame may...
It makes a ton of sense from a manufacturers point of view. From a consumer standpoint less so. The compromises of using a shared frame may be small but they are there. If you were designing with a clean sheet I'm not sure you'd have a longer reach and steeper SA on the shorter travel version.
The whole we didn't see the point of proportional rear centres but we went to all the trouble of changing it anyway by a tiny amount is odd.
But we did vary the BB height between low-ish(36mm) and incredibly low(48mm!!-tbh I don't of any similar bike with that much drop). That is pretty huge and will have a big effect on handling.And the reason is........consistant roll over angle? Really?
Just some odd things.
Nice looking though.
I'm anti size specific chainstays as I see it as increasing cost for the vast majority of riders (on M and L) for the freakishly short and freakishly tall people out there. I prefer how YT does it where there's one size, say 440mm for S, M, L and then 450mm for XL and XXL. Achieves a balanced bike feel and balanced manufacturing cost/cost-benefit to the average consumer who rides a M or a L.
it It's annoying to see "they share the same front triangle" bandied about and prices still increase this much. I had a Ripmo V1 frame for $3k then an AF for $1.8K and the V3 frames are now $3.7K. That's 23% and my pay surely didn't go up 23% in the past few years. Not to use YT again, but I'm pretty sure they share a front triangle between the Decoy MX and Decoy 29 but DON'T shove that fact in your face and instead let their much lower prices do the talking. Cheapest Decoy MX was $5K when it came out in 2018 and it remains $5K to this day (on sale for $4K rn but MSRP is still $5K)
I don’t want to derail and have looked online… but wonder if their stated CS length is the longer position and you can swap to a shorter setting. Bummer if so, bc it woulda been awesome if there was a neutral setting (listed as stock length on geo chart).
Can we move on from whether we like chainstays or not now please
Look here’s Kris Kyle on the new Status
Can we move on from whether we like chainstays or not now please
Look here’s Kris Kyle on the new Status
Rough specs from a site that might've put them up too soon:
The Specialized Status 170 '24 is a mullet-wheeled, long-travel mountain bike that delivers impressive performance without breaking the bank. Whether you’re charging down technical descents or hitting the bike park, this gravity sled has you covered. Let’s dive into the details:
Frame and Build Kit:
The frame is constructed from Specialized’s M5 alloy tubing, ensuring durability and strength.
Neat internal cable routing keeps things tidy, and the chain stays feature chain slap protection.
The satin grey paint and minimal graphics give it an understated look.
Available in only one build spec, the Status prioritizes function over flashy aesthetics.
The suspension platform utilizes Specialized’s proven 4-bar Horst link with a yoke driving the shock.
A flip chip at the yoke end allows you to adjust the head angle (between 63.2° and 63.7°) and BB drop (-8.5mm to -17.5mm).
Frame sizes range from S1 to S5, with reach spanning 417mm to 512mm.
Geometry is long, slack, and low, with ultra-short 426mm chain stays.
Componentry:
Fox Float 36 Rhythm GRIP 160mm fork handles front suspension.
The rear suspension features a DPX2 Performance shock.
100% ^^^ So many opinions on here presented as absolutes. Everything is a compromise and a skilled rider will compensate. I won't say it's impossible to make a "bad" bike these days, but it's pretty hard. Both of these bikes look pretty stellar to me.
Man you’re right! Due to the magic of the human body geo doesn’t matter we can just adapt! Lol cmon bro that’s bad logic. if that were true it would work the other way ie you can make a cs as long as you want and the rider will adapt (actually it does kinda work that way, see reviews for high pivot bikes…)
The problem is that when you weight the pedals, the balance of front and rear center will determine where the force goes. Sure you can weight the front end on bikes with short cs, but that sucks.
While that is true, if the front center grows without the rear center also growing, the weight distribution shifts more and more towards the rear.
This results in being forced to ride with more weight on your hands which is generally undesirable. IMO, your hands should mostly be used for controlling the bike and fore-aft stability, not for supporting your weight.
I’m 6’3” and find that many bikes with short CS and long reach force me into a riding position that I don’t like in order to place enough weight on the front wheel.
Physics is an absolute. We “adapted” to horrible bike geo over the years. The progressive geo trend has been a process to make bikes work better. Saying “bikes don’t need to work better, the rider just needs to adapt” is 2012 cave man logic. We’re still working on finding a good balance between hta, reach, stack, bb height, and cs length. It’s hard. But saying it doesn’t matter, it’s just a lie. If ibis put 2012 geo on the new ripley you wouldn’t say “hey man hard to make a bad bike we will all just adapt” you would say hmm this geo looks a bit outdated, and 69* hta is actually kinda whack. So no, geo can be wrong and bad, and that’s ok, because we’re all working towards the goal of better handling bikes. It’s just a bummer for ibis because they didn’t get the memo about CS length. But we’re going to see a lot of brands getting it wrong (speci, etc.) it’s just harder for ibis because they made their front ends even longer!!!
continue chainstay length discussions HERE as to not drown the tech rumors out
https://www.vitalmtb.com/forums/The-Hub,2/The-Internet-Was-Wrong-Short-…
started in 2016, @jeff.brines ' "short chainstays suck" thread can live on.
The Ripley of yesteryear is officially dead. No longer a light XC bike that could shred trails with 120mm. Now a 130mm bike that's pretty heavy and is actually the exact same frame as the Ripmo (just different clevis and shock between the two frames). This plus weird geo changes... Ibis trying to stay afloat/be profitable by selling two bikes with the same frame--just swapping a part and shock.
Thanks Sspomer,
Has anyone noticed a real change recently from open mindedly discussing/presenting rumours and innovations, to endless posts about "opinions as facts" on the topics?
Maybe its just me, but I felt like this thread used to be more open to ideas, and just seeing cool things, and I'd like a return to that. These new things arent for everyone, and not every product is meant to be the perfect fit for everyone, which is friggin great, we should want diversity in the marketplace, shouldnt we?
I feel like we have strayed from that recently.....
There are always going to be people looking for progress and other people defending the status quo. Some people will see new bikes and say “great! Just like my old bike!” Others will say “dammit, just like my old bike.” I feel like discussing these points is worthwhile. I just think some of y’all don’t like being wrong
If we're sharing our wishlists, I'd like to suggest that everyone who makes an argument like "because physics" kindly show your work. On the topic of the sciences, the goal typically is the characterize the size of the difference. It's a tell whenever an argument takes the form of "less weight" or "more traction" (i.e. "A and B are different") must be better because if two things are different one is better than the other. There's a whole universe of real, detectable differences that are small enough to be meaningless with respect to some outcome people actually care about. Even when we're sure they must (they must! these Ti bolts weren't cheap!**) matter. It's not intuitive just where that transition lies.
**W = Fs & F= ma ∴ W = (ma)s ∴ less mass is less work, work less ride more brooooo! [rides into the sunset]
^^^ an example of what I think is not a good argument, in case that wasn't clear
I just think, "cool, new bike!"
Friggin love new bikes, and brakes, and forks, and shocks, hmmmmm tires, stems......Not helmets though, frig I could care less about new helmets....
The popularity of social media and the need for new content (see also the daily news cycle) in the past 10 years or so has blurred the line for many between opinion and fact and has created comfy echo chambers for us lazy animals. Or somethign like that.
Back to Ibis... it's commendable they tried to limit investment by reusing materials through the range, clearly the financial sting from the past few years is still there. But like what often happens, that middle ground is OK at everything and not great at any one thing.
What coudl this be?
Either alloy version of the new spectral or new torque... The torque while is good at freeride/big jumps, really needs a Park version thats less progressive IMO
As a consumer I think it's so rad to have two bikes in one. One of my favorite bikes was my second gen Bronson that I swapped for a 5010 frame to race slalom. But the ability to use a 5mm longer stroke shock/fork air spring to turn it back into a Bronson made it the best of both worlds. With two different clevis and shock sizes I feel like the Ripmo/Ripley would be even better.
I agree & while looking at geo charts I think me at 6ft could ride a large ripmo with a 170 fork and then happily adapt it to shorter travel being the ripley.
The new Norco Sight is at the top of the list for me, it's 150mm rear takes a 205x60 shock stock, but it can take a 205x65 to bump it to 160mm. I currently have a bike running a 205x65 coil so I'm eying the alloy frameset since you get a Vivid Ultimate air and both shock mounts to run it mullet or full 29er.
Why is it that the Gen 2 Bronson/5010 were so damn good for so many people, but we are so far away from that now? I had the bronson and felt like it was perfect in the middle, run light tires for XC/all mountain and then throw heavys on for DH laps. Miss that bike a bit too much.
I notice you mention specialized have also missed the boat on longer CS and i can only assume you meant on the new stumpy. This was also my initial impression but i was chatting to my local dealer about the new bike losing the chain stay adjustment that the stevo had and he informed me that bb high/low setting flip chip would still change chainstay length approx 7mm.
Can anyone actually confirm this is true? It makes sense but it doesn’t seem to be advertised anywhere nor have I found a chart for it.
Pulled from the manual:
Chainstay Rants and Opinions Forum?
Also the geo tool: https://www.specialized.com/us/en/app/stumpjumper-15-geometry
Video of the Bike Yoke wireless dropper
Edit: added pic, looks like charging port on collar?
Thank you, I shall consider it Confirmed !
Called it.
Seems obvious now doesn't it?
Yep, you did. I'm a little surprised and it probably ends up making the Ripley a little heavier than it otherwise would be (I'm still getting one), but it makes a ton of sense as well.
It makes a ton of sense from a manufacturers point of view. From a consumer standpoint less so. The compromises of using a shared frame may be small but they are there. If you were designing with a clean sheet I'm not sure you'd have a longer reach and steeper SA on the shorter travel version.
The whole we didn't see the point of proportional rear centres but we went to all the trouble of changing it anyway by a tiny amount is odd.
But we did vary the BB height between low-ish(36mm) and incredibly low(48mm!!-tbh I don't of any similar bike with that much drop). That is pretty huge and will have a big effect on handling.And the reason is........consistant roll over angle? Really?
Just some odd things.
Nice looking though.
I'm anti size specific chainstays as I see it as increasing cost for the vast majority of riders (on M and L) for the freakishly short and freakishly tall people out there. I prefer how YT does it where there's one size, say 440mm for S, M, L and then 450mm for XL and XXL. Achieves a balanced bike feel and balanced manufacturing cost/cost-benefit to the average consumer who rides a M or a L.
it It's annoying to see "they share the same front triangle" bandied about and prices still increase this much. I had a Ripmo V1 frame for $3k then an AF for $1.8K and the V3 frames are now $3.7K. That's 23% and my pay surely didn't go up 23% in the past few years. Not to use YT again, but I'm pretty sure they share a front triangle between the Decoy MX and Decoy 29 but DON'T shove that fact in your face and instead let their much lower prices do the talking. Cheapest Decoy MX was $5K when it came out in 2018 and it remains $5K to this day (on sale for $4K rn but MSRP is still $5K)
I don’t want to derail and have looked online… but wonder if their stated CS length is the longer position and you can swap to a shorter setting. Bummer if so, bc it woulda been awesome if there was a neutral setting (listed as stock length on geo chart).
Can we move on from whether we like chainstays or not now please
Look here’s Kris Kyle on the new Status
Rough specs from a site that might've put them up too soon:
The Specialized Status 170 '24 is a mullet-wheeled, long-travel mountain bike that delivers impressive performance without breaking the bank. Whether you’re charging down technical descents or hitting the bike park, this gravity sled has you covered. Let’s dive into the details:
Frame and Build Kit:
The frame is constructed from Specialized’s M5 alloy tubing, ensuring durability and strength.
Neat internal cable routing keeps things tidy, and the chain stays feature chain slap protection.
The satin grey paint and minimal graphics give it an understated look.
Available in only one build spec, the Status prioritizes function over flashy aesthetics.
The suspension platform utilizes Specialized’s proven 4-bar Horst link with a yoke driving the shock.
A flip chip at the yoke end allows you to adjust the head angle (between 63.2° and 63.7°) and BB drop (-8.5mm to -17.5mm).
Frame sizes range from S1 to S5, with reach spanning 417mm to 512mm.
Geometry is long, slack, and low, with ultra-short 426mm chain stays.
Componentry:
Fox Float 36 Rhythm GRIP 160mm fork handles front suspension.
The rear suspension features a DPX2 Performance shock.
SRAM NX Eagle 12-speed drivetrain ensures smooth shifting.
SRAM Code R brakes provide reliable stopping power.
The X-Fusion Manic dropper seatpost offers 170mm of travel.
The rest of the build consists of Specialized’s own brand components.
Note: The Butcher Grid tires could use improvement—thin sidewalls and a hard compound make them less ideal for wet conditions.
Value Proposition:
The Status 170 '24 delivers a lot of bang for your buck, especially when compared to other big-brand bikes.
With its capable suspension, solid component spec, and aggressive geometry, it’s a hard-charging enduro/park bike.
For those who want a gravity-focused ride that won’t empty their wallets, the Specialized Status 170 '24 is a compelling option. Get ready to shred!