Recent Activity

All

xremcox Liked a bike check Kona Honzo ESD Singlespeed BMXTB

3/6/2025 10:54pm
This bike check has 9 comments.
If you haven't already, disassemble your air spring and remove excess grease in the negative chamber. That can cause all kinds of problems.
This feature has 39 comments.
I've read both opinions and I'm sure it has a lot to do with rider weight and aggression. I'm outing myself as cautious and slow, but at 175lbs I can only use the open end of adjustments. It may also be worth noting the bike is a little older and has the classic rearward weight balance. I bought the fork from Jenson in retail packaging so I would doubt it's been touched.
Votes:
1
This feature has 39 comments.
That sounds to me more like an issue with too much damping. I found all 38s way too overdamped for my 70kg of fairly aggressive riding.
This feature has 39 comments.
I think it's a bit of a grip2 problem. You're very right that the 38 is heavily damped. I'm a little heavier than you and I run HSC wide open, LSC a couple clicks from open to reduce dive. I can open up the LSC for an improvement in ride quality, but at the cost of support and it still doesn't use full travel. The way I interpret that is the damper could be better, and maybe I'm a candidate for a gripX2, but the spring is also too progressive. With more linearity I should be able to keep the...
Votes:
1
This feature has 39 comments.

nsp234 Liked a reply to forum topic MTB Tech Rumors and Innovation

3/4/2025 4:50pm
Looks like a perfect step to me 🤷‍♂️
This forum topic has 30444 replies.
I've been interested in the Noken for my 38 and this review sealed the deal. I almost never get full travel but more importantly, my 38 does not seem to get more plush with reduced pressure past a point. It just wallows more without working any better over small bumps. Thanks 👍
Votes:
5
This feature has 39 comments.

sprungmass Liked a reply to forum topic Nerding out on Brakes shall we? Not another tech deraliment

2/20/2025 6:24pm
Orbital sander + 120 grit pad 20-30 seconds on each side x2 using medium pressure. This is how I prep my rotors when changing pad compounds/brands. I even do this when changing pads to fresh ones. Never let me down.
This forum topic has 2937 replies.

noodlenosteeze Liked a reply to forum topic MTB Tech Rumors and Innovation

1/31/2025 2:00pm
You can say your buddy works at Propain it's okay.
This forum topic has 30444 replies.
We all know the theory: lower tire pressures mean more grip, and higher pressures roll faster. But when it comes to real-world speed, which one really wins? I set out to answer this with 30 timed runs down the same track. ◾ The Experiment Two sets of tire pressures were chosen for my 88kg (194lbs) weight: 25/28 psi (front/rear) for the higher pressures and 18/20 psi (front/rear) for the lower pressures. These pressures maintain a consistent 0.9 front-to-rear ratio, with the high pressures aligning with recommendations such as those from E13 . After three warm-up laps, each tire pressure setup...
This forum topic has 34 replies.

cheapondirt Added a reply to MTB Tech Rumors and Innovation

1/14/2025 7:37am
Depends where you position your foot. Arch over axle - convex. Ball over axle - concave. Wonder if their new flat pedal will be concave or just a refinement of the existing?

BlazersDad89 Liked a comment about Feature What's In / What's Out - Mountain Biking in 2025

1/9/2025 6:20pm
Jason going for the jugular here. Sorry but I'm gonna keep rocking the sunglasses with the FF so I can climb conveniently and than, when I reach the top I'll take a sip from my second bottle that's on my hip pack. Don't worry though Jason, if you have a flat, you can use my proper sized hand pump that's in the pack too.
This feature has 40 comments.

JDM Liked a bike check Rocky Mountain RM7 - Wade Simmons Edition

1/8/2025 5:48am
This bike check has 8 comments.

Cougar797 Liked a reply to forum topic MTB Tech Rumors and Innovation

12/31/2024 10:34am
So brakes, rims, your cable ends, as far as complexity I wanted to bring some perspective. I’m an engineer and have worked in consumer goods manufacturing my whole adult life; “Simple” stuff you use every day at home. Most anything is easy to design in the grand scheme of things. Manufacturing anything on the other hand is hard. Everything you use everyday, I guarantee you is 100x more difficult and complex to produce then you can imagine. Some of these simple assemblies we ride probably meant a team of people worked months and beat their head on a wall to...
This forum topic has 30444 replies.

codahale Liked a bike check Mistress

12/25/2024 3:26pm
This bike check has 20 comments.

zonoskar Liked a bike check 2015 Rocky Mountain Thunderbolt 799 custom paint

12/21/2024 9:11am
This bike check has 2 comments.

hairybarnyard Liked a reply to forum topic Nerding out on Brakes shall we? Not another tech deraliment

12/14/2024 12:27pm
I owned codes before getting dominions. All I'd say is that it took me a while to get used to the light lever action and I found myself locking up unintentionally a lot to begin with. Several months on, however, my fingers are reprogrammed and it's second nature and I'm reaping the rewards with 1. less hand/arm fatigue and 2. More confidence because there's just silly amounts of braking power available on tap with very little effort. You'll learn to modulate over time if you stick with it.
This forum topic has 2937 replies.
Speaking of Cominions. I finally got myself a pair of Dominions, so I can compare them to my Cominions (Code RSC levers, Dominion A4 calipers). The two setups have nothing in common except the calipers. Pads, rotors, and wheel sizes are all different. I can't make any useful observations about power. This post is all about feel. Both levers are...

veefour Liked a reply to forum topic MTB Tech Rumors and Innovation

11/28/2024 5:20pm
I went back to 11 speed on all of my bikes about 4 years ago. I find it far less finicky than 12 speed to set up and spending less on wear items suits me fine.
This forum topic has 30444 replies.