2026 MTB Tech Rumors and Innovation - Longer and Slacker

Related:
Fantaman
Posts
72
Joined
4/24/2013
Location
NL
6/22/2026 1:42am
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

4
Primoz
Posts
4624
Joined
8/1/2009
Location
SI
6/22/2026 2:32am

It's a non standard post mount, right? Wider spacing? 

Evil96
Posts
831
Joined
8/21/2014
Location
Portogruaro, VE IT
6/22/2026 2:43am
Primoz wrote:

It's a non standard post mount, right? Wider spacing? 

yeah, so need special adapter that of course work on pm mounts, need to go +20mm rotor size 

1
1
Fantaman
Posts
72
Joined
4/24/2013
Location
NL
6/22/2026 2:53am
Primoz wrote:

It's a non standard post mount, right? Wider spacing? 

It uses a Radial brake caliper just like on Motorcycle brakes.

6/22/2026 3:50am
Fantaman wrote:
 Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

1
Eae903
Posts
435
Joined
10/20/2023
Location
Laramie, WY US
Fantasy
6/22/2026 6:33am
Fantaman wrote:
 Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

Think the rotors will fit in a v4 caliper? 

kperras
Posts
174
Joined
12/19/2012
Location
CA
6/22/2026 9:37am
Fantaman wrote:
 Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

iceman2058 wrote:

100% made for Surrons.

5
2
Eae903
Posts
435
Joined
10/20/2023
Location
Laramie, WY US
Fantasy
6/22/2026 9:41am
Fantaman wrote:
 Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

iceman2058 wrote:
kperras wrote:

100% made for Surrons.

There is likely 0 crossover in people who buy Surrons and people who buy Hope brakes. 

6
17
sspomer
Posts
6268
Joined
6/26/2009
Location
Boise, ID US
Fantasy
6/22/2026 9:51am Edited Date/Time 6/22/2026 9:54am
Eae903 wrote:

There is likely 0 crossover in people who buy Surrons and people who buy Hope brakes. 

people geek out over their e-motos just like we do about mountain bikes.

The Panther - A Custom Surron Odyssey

18
kperras
Posts
174
Joined
12/19/2012
Location
CA
6/22/2026 9:53am

You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers is significant.

23
DServy
Posts
250
Joined
5/28/2015
Location
Jackson, WY US
6/22/2026 10:08am
kperras wrote:
You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers...

You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers is significant.

they should use actual moto parts... because they are fucking eMotos. 

I hate those fucking bikes. 

32
14
Uncle Cliffy
Posts
403
Joined
3/11/2010
Location
Medford, OR US
6/22/2026 10:42am
DServy wrote:

they should use actual moto parts... because they are fucking eMotos. 

I hate those fucking bikes. 

Don’t hate the tool. Hate the “tool.” 

Utilized in the proper context, they are loads of fun. It’s unfortunately too easy to act the fool on one. 

26
Evil96
Posts
831
Joined
8/21/2014
Location
Portogruaro, VE IT
6/22/2026 1:14pm
Fantaman wrote:
 Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.
image 745

 

Hope V6 Mono Ti limited Edition of 1000 sets starting in August 1st, Hopes new Vented T-Slot rotors 3.3mm thick.

Eae903 wrote:

Think the rotors will fit in a v4 caliper? 

Yes

1
Buckets Up
Posts
245
Joined
10/18/2010
Location
Hancock, MI US
6/22/2026 2:09pm
kperras wrote:
You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers...

You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers is significant.

DServy wrote:

they should use actual moto parts... because they are fucking eMotos. 

I hate those fucking bikes. 

To each their own. I don’t own either (and won’t anytime in the near future), but I would take a Surron before an e-bike everyday of the week if it was for personal use. (I would only ride the Surron on trails designated for motorized use or private property where I had explicit permissions)

8
jsray
Posts
221
Joined
5/20/2017
Location
Gilbert, AZ US
Fantasy
6/23/2026 5:28am Edited Date/Time 6/23/2026 5:28am

Arguing about surrons and surron demographics on the MTB tech rumors thread. Sick. 

I wonder if SRAM considered 6 pistons when working on the Mavens. Maybe after the 1000th piston massage, some SRAM tech was like maybe we should just add 2 more pistons. 

14
Yoda
Posts
145
Joined
9/24/2021
Location
IT
Fantasy
6/23/2026 5:51am

New rumor. Canyon has a press release (which was revised afterwards removing MG) that at eurobike they'll have a long travel mtb with a prototype Avinox labled 'MG'. Might be a gearbox motor combo.

11
6/23/2026 6:53am
jsray wrote:
Arguing about surrons and surron demographics on the MTB tech rumors thread. Sick. I wonder if SRAM considered 6 pistons when working on the Mavens. Maybe after...

Arguing about surrons and surron demographics on the MTB tech rumors thread. Sick. 

I wonder if SRAM considered 6 pistons when working on the Mavens. Maybe after the 1000th piston massage, some SRAM tech was like maybe we should just add 2 more pistons. 

Nah, you'd be massaging an extra 2 pistons at the end of the day. 

4
ride
Posts
79
Joined
8/4/2009
Location
Bellinghome, WA US
6/23/2026 7:08am
kperras wrote:
You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers...

You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers is significant.

Yeah same here in the 'ham. There are at minimum 6 pretty bad ass Surron tracks in, or adjacent to the properties of well established MTB folks here in town. Some of their Rons are as insanely built out and equipped as some of the most expensive halo emtb's on the market... 

6/23/2026 7:27am
Yoda wrote:
New rumor. Canyon has a press release (which was revised afterwards removing MG) that at eurobike they'll have a long travel mtb with a prototype Avinox...

New rumor. Canyon has a press release (which was revised afterwards removing MG) that at eurobike they'll have a long travel mtb with a prototype Avinox labled 'MG'. Might be a gearbox motor combo.

If this is true, at what point are avinox shooting themselves in the foot? Ebikes are expensive enough that I’ve been holding off on investing in one until the tech change slows a bit. An MGU would compound this issue. 

2
6/23/2026 12:09pm
kperras wrote:
You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers...

You'd be surprised. The Surrons around here are decked out in Fox factory, EXT, etc suspension, anodized MTB parts, TRP DHRs, etc. The overlap in customers is significant.

DServy wrote:

they should use actual moto parts... because they are fucking eMotos. 

I hate those fucking bikes. 

https://titaniumsurron.com/products/surron-lbx-foot-brake-kit-hope-tech

Here's a foot brake adapter for Tech V4s! Also what a horrible take, Surron created something between a pit bike and a dirt bike and made it virtually maintenance free and fun as hell

4
1
6/23/2026 1:14pm

Now that Cam McCaul is on revel bikes, are we going to see a big dh or freeride bike from them?

1
6/23/2026 2:32pm
overbiked wrote:

Now that Cam McCaul is on revel bikes, are we going to see a big dh or freeride bike from them?

Doubt it. 

dolface
Posts
1698
Joined
10/26/2015
Location
CA US
6/23/2026 3:17pm
overbiked wrote:

Now that Cam McCaul is on revel bikes, are we going to see a big dh or freeride bike from them?

Doubt it. 

I dunno, they made the Rodeo as a proof of concept, wouldn't be too surprised if they resurrect that project...

3
Riipper
Posts
7
Joined
5/1/2014
Location
CA
6/23/2026 3:46pm Edited Date/Time 6/23/2026 3:47pm

From Forbidden’s latest instagram post, teaser of Title’s “unreleased” CR1 cranks


IMG 4937

19
monarchmason
Posts
309
Joined
5/24/2022
Location
Nevada City, CA US
6/23/2026 6:11pm
Riipper wrote:
From Forbidden’s latest instagram post, teaser of Title’s “unreleased” CR1 cranks

From Forbidden’s latest instagram post, teaser of Title’s “unreleased” CR1 cranks


IMG 4937

I love how clean and not flashy that is.

9
6/23/2026 8:08pm

I need a rumor…… about a Horst Hightower …..

What’s the word on the next Cruz to “transition” to 4bar?

Where da rumors at? 

(Surrons are peak e-bike)

2
9
Big Dos
Posts
57
Joined
11/7/2016
Location
AU
6/23/2026 8:14pm

Pardon?

2
monarchmason
Posts
309
Joined
5/24/2022
Location
Nevada City, CA US
6/23/2026 9:02pm Edited Date/Time 6/23/2026 9:05pm

Im calling it. 15 years from now Santa Cruz will unveil their ultra light and strong innovative single pivot bike… But only after Specialize fails to patent it with the most complex reasoning as to why their 1 bolt surrounded by bearings is Special. 

All jokes aside, components are so good now days and frames are becoming heavier, Id heavily consider a well designed carbon single pivot bike for weight savings and just peace of mind simplicity. 

I know this is not a rumor but it aint my fault no one is innovating. 

2
Ervin321
Posts
16
Joined
7/3/2025
Location
San Francisco , CA US
6/23/2026 9:15pm

I need a rumor…… about a Horst Hightower …..

What’s the word on the next Cruz to “transition” to 4bar?

Where da rumors at? 

(Surrons are peak e-bike)

Surron to release a VPP e moto

4
sethimus
Posts
914
Joined
9/20/2014
Location
CH
6/23/2026 10:42pm
If this is true, at what point are avinox shooting themselves in the foot? Ebikes are expensive enough that I’ve been holding off on investing in...

If this is true, at what point are avinox shooting themselves in the foot? Ebikes are expensive enough that I’ve been holding off on investing in one until the tech change slows a bit. An MGU would compound this issue. 

do you live under a rock? check yesterday’s news about their everyday ebike for 3500eur (with taxes). those things are getting cheaper because of the chinese, not more expensive…

2

Post a reply to: 2026 MTB Tech Rumors and Innovation - Longer and Slacker

The Latest