Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat angle looks like it was from 1-2 generations back.
Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat...
Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat angle looks like it was from 1-2 generations back.
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build it for WP for a boat load of cash so DVO can further develop their new 2024 stuff we have seen floating round?
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build...
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build it for WP for a boat load of cash so DVO can further develop their new 2024 stuff we have seen floating round?
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair. I’m not positive but I think ohlins used to do something similar until they invested in making their own lowers/uppers for their forks
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build...
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build it for WP for a boat load of cash so DVO can further develop their new 2024 stuff we have seen floating round?
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair...
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair. I’m not positive but I think ohlins used to do something similar until they invested in making their own lowers/uppers for their forks
As far as I know Ohlins collaborated with Cane Creek for the double barrel. How the relationship worked I have no idea, but you could get an Ohlins "double barrel" in silver for formula student (as revalved DHX shocks were common in formula student at the time).
I'd be surprised if this is any more than a rebranding exercise, new internals are expensive and would make servicing more cumbersome. It does look a bit different to DVOs current offering though...
Just a Photoshop job lol. They combined the Stumpy Evo and Enduro and it's not bad looking at a glance, but that linkage would be impossible without a tiny shock stroke and you can see where they tried to 'erase' the vertical dogbone link from the Enduro.
Just a Photoshop job lol. They combined the Stumpy Evo and Enduro and it's not bad looking at a glance, but that linkage would be impossible...
Just a Photoshop job lol. They combined the Stumpy Evo and Enduro and it's not bad looking at a glance, but that linkage would be impossible without a tiny shock stroke and you can see where they tried to 'erase' the vertical dogbone link from the Enduro.
A 2023 carbon frame with cable ports? Definitely fake.
Which street is that? Hayes have stated the Gamux Racing team were testing some prototype 220mm D-rotors LAST YEAR, it was even covered in some PIT BITS here on Vital, and since then - nothing!
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build...
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build it for WP for a boat load of cash so DVO can further develop their new 2024 stuff we have seen floating round?
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair...
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair. I’m not positive but I think ohlins used to do something similar until they invested in making their own lowers/uppers for their forks
The lockout/adjustment lever is relocated to the side. An odd move for a rebranding but then again, but maybe not that hard to relocate like that?
Has anyone seen this yet? Ebike motor with 360wh battery for only 3.6kg! Uses the same gear reduction method as the motor Trek is using. https://youtu.be/eDG8OmIbjlE
That WP suspension looks the same as the new DVO stuff just with different adjusters.
https://www.pinkbike.com/news/dvo-compression-upgrade-kit-garnet-dropper-post-taipei-cycle-show-2023.html
That WP suspension looks the same as the new DVO stuff just with different adjusters.
Sam Hill on the prototype caliper last weekend here in Oz def no writing on it thou even at 400%, I also love how the new Dissent Carbon is marketed and sold with only air shocks and their best rider is running coil.
Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat...
Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat angle looks like it was from 1-2 generations back.
Pretty Accurate...also not having the Transmission Groupset and the Stealth Brakes on a prototype would have been strange.
That's because for every set of 5dev crap on the market their are probably 10,000 SRAM carbon cranks.
What is this
Definitely looks like a new Stumpy Evo with the rear axle flip chip and Lyrik.
Looks like a photoshop job to me. The linkages don't make sense at all. That's a Fox fender on a RS fork. The really slack seat angle looks like it was from 1-2 generations back.
A shitty render
From an Instagram account that is run by a guy that has fun rendering wild bikes. Render is not from Specialized.
Aye, no bottle mounts either.
Word on the street is Hayes has a new 220mm rotor
WP now making MTB suspension? Seems so! https://www.vitalmtb.com/photos/members/wp-suspension-gasgas-e-bike-pro…
With it just being red DVO, I’d be super interested in how this relationship works. DVO hand over all their RnD and contract suntour to build it for WP for a boat load of cash so DVO can further develop their new 2024 stuff we have seen floating round?
My guess would be that the suntour made fork & shock body were the cheapest/easiest to source and that the internals are a completely custom affair. I’m not positive but I think ohlins used to do something similar until they invested in making their own lowers/uppers for their forks
sea otter 2 video
As far as I know Ohlins collaborated with Cane Creek for the double barrel. How the relationship worked I have no idea, but you could get an Ohlins "double barrel" in silver for formula student (as revalved DHX shocks were common in formula student at the time).
I'd be surprised if this is any more than a rebranding exercise, new internals are expensive and would make servicing more cumbersome. It does look a bit different to DVOs current offering though...
Just a Photoshop job lol. They combined the Stumpy Evo and Enduro and it's not bad looking at a glance, but that linkage would be impossible without a tiny shock stroke and you can see where they tried to 'erase' the vertical dogbone link from the Enduro.
A 2023 carbon frame with cable ports? Definitely fake.
Which street is that? Hayes have stated the Gamux Racing team were testing some prototype 220mm D-rotors LAST YEAR, it was even covered in some PIT BITS here on Vital, and since then - nothing!
Unno DH bike closer to production?
The lockout/adjustment lever is relocated to the side. An odd move for a rebranding but then again, but maybe not that hard to relocate like that?
Has anyone seen this yet? Ebike motor with 360wh battery for only 3.6kg! Uses the same gear reduction method as the motor Trek is using. https://youtu.be/eDG8OmIbjlE
That WP suspension looks the same as the new DVO stuff just with different adjusters.
https://www.pinkbike.com/news/dvo-compression-upgrade-kit-garnet-droppe…
Looks like Loris is running the same MRP lower as on the Yeti proto. Perhaps this is more than a one-off?
I think I saw them in the MRP booth at sea otter
Demo linkage
It's s mrp lower guide for high/mid pivot bikes. It should reduce a good bit lower chain line growth.
Same for the fork. DVO vents: https://www.vitalmtb.com/photos/members/wp-suspension-gasgas-e-enduro-p…
Yeah you can see it in Vital's video around the 1:37 mark.
More Sea Otter tech to dig into: https://www.vitalmtb.com/photos/features/pit-bits-sea-otter-2023-day-3/…
Sam Hill on the prototype caliper last weekend here in Oz def no writing on it thou even at 400%, I also love how the new Dissent Carbon is marketed and sold with only air shocks and their best rider is running coil.
Pretty Accurate...also not having the Transmission Groupset and the Stealth Brakes on a prototype would have been strange.
Privateer downhill bike?
Screenshot from their insta story