All

Some close ups on the new E*thirteen Components Sidekick Cool how low drag their hubs are.

Microshift Advent MX Groupset One thing to note: Microshift only sells Cassette, Der and Shifter so chain and cranks and chainring will have to be found yourself.

Hii. This is great! I don't know how you guys were everywhere at once! Don't want to step on anyones toes or steal anyones thunder but it seems like the coverage is starting to slow down so I thought I would jump in. Here's a couple things I cool things I saw this year that I haven't seen covered. Unreleased Wolf Tooth Hubs It does seem to use a ratchet system, doesn't appear to have any drivetrain feedback mitigation system, will be available in straight pull or j bend and offered in the common gravel and mtb standards. And in...

TBD Bikes 3D Printer DJ Pretty epic dirt jumper from TBD Bikes , created by 17-year-old Dylan Banera. Currently going to school to become a machinist with the plan to get an engineering degree afterward, Dylan has been 3D printing since he was 10. This is the second generation of his prototype dirt jumper, appropriately called the ‘Neck Twister.’ Highlights 3D printed aluminum frame with generatively designed lugs, internally latticed tubes, bonded with aero-grade epoxy Can run a chain or Gates carbon belt drive. Belt tension is still under refinement. Frame weight ~12 lb

From part of Pinkbike's Sea Otter coverage. Where the hell is plain black?! Or even silver?

https://www.vitalmtb.com/forums/hub/modern-geo-talk-chainstays-stack-re…

I think that's sort of the point, the only metric anyone cares about is the motor. The essence of riding an eBike is what the motor gives you. The rest of the "bike" part takes a back seat. And no one seems to care, even though the slippery slope foreboding was waved away as an irrational fear

Just a hunch, but I doubt Santa Cruz is letting YouTubers/Instagramers test out new stuff... especially with Specialized tires. Willing to put money that's just a XO RSV Bullit with a wrap on it.

Zoceli Naosm steel enduro bike Beautiful hand-made bike sitting out front of HUNT that I’ve never seen in person. You can get all the details on the Naosm here

New DEITY Slip-on grip, DJ Saddles, & 50mm Alloy Bars DEITY is launching its first slip-on grip, the Nightcrawler, coming very, very soon. Grip details include: 32mm outer diameter 147mm length (Grip Only) / 154mm length (Including End Plug) Tighter inner diameter to prevent water and dust intrusion Perpendicular ribbing to dampen vibrations Chevron V-channel ribbing to provide an ergonomic feel and support the swell of the palm Wider and shorter ribbing to prevent collapsing of the ribs and side to side play Comes with nylon DEITY Plunger End Plugs that are color matched to the grip for a seamless...

Freedom Coast Lever for TRP EVO Pro Freedom Coast had a new lever to upgrade for TRP’s latest EVO Pro model. Key changes vs. stock include - different lever hook and profile, easier to grip reach adjust knob, and textured braking surface. MSRP is $119 USD, and there are 5 color options.

Dunlop Dunlop has soft-launched into MTB with four new models. Expected availability is set for early summer in the U.S. only, with MSRP still to be determined but anticipated to be in the $95-110 range. There are DH and enduro casings. The DH casing uses 2x60 TPI layers with an apex layer at the bead, while the enduro casing uses one 60 TPI layer with a smaller apex layer. The downhill casing also uses a softer rubber than the enduro casing. The tread designs are front/rear specific and share similarities with other popular designs. The rear tires are the most...

Blues Bikes Tripping Balls at Gates Steel, belt drive, gear box. Checking the boxes at the Gates booth with the Blues Bike Tripping Balls that gets 145-160mm of travel via "Chris Canfield Suspension Formula" according to the placard.

TRP released new budget brakes. With all the big fancy things being released its nice to see some budget stuff. Especially for this TRP lover.

The S-Works is a full Sram build. The drivetrain was developed with Sram so it makes sense, plus the S-brands have had a long history of being tight. The Team Replica is, well, a team replica: Ohlins, Brembo, DT Swiss, etc... There's a dark grey paint job that has the same marble(?) like texture that looks pretty slick with a red Boxxer and coil.

"Enduro" is dead, time to dust off "All Mountain".

Hahah! My local Spesh dealer said they aren’t doing a new enduro as there is no market for it anymore. Yet Henry from Quarter HP said in the stumpy video that it’s a well known secret its being in development for some time. Can’t help but feel Charlie Murray wants something longer travel for the chunky EWS tracks

S Works with RockShox?! I wonder how Ohlin's feels about this, lol. Welp, I guess this means there's a $12,000 build of the Demo for us peasants 😂

Anyone who has owned automotive Brembos or even ye olde Grimeca System brakes will know how often they need a repaint due to fading from red to pink and chipping of the paint.. Hard anodizing on the other brands is a major plus (For me anyway) It would have been great if they offered the Brembo motorcycle Stylema anodised finishes.

Cane Creek Invert Cane Creek showed off their new upside down enduro fork, dubbed The Invert. Price is $1,599, it features 160, 170 or180mm of travel via different air springs, comes stock with 15mm axle but can also run 20mm available separately. 160, 170 or 180mm travel Air spring only High-speed Compression, Low-speed Compression, Low-speed Rebound 45mm upper tubes 38mm stanchions Bleed screw in top cap 586.5mm axle-to-crown height (170mm) 200mm brake mount, 220mm adaptor available Claimed weight: 2795g (180mm travel mode with guards, hardware and full steer tube) $1,599 Development started 3 years ago and they're currently taking deposits...