All

Reading between the lines it seems to me like Jessie-May had the idea and approached Fox. It's a great idea for an article, and I wish I'd written it! I'm guessing she tore down her fork for an apples to apples comparison with the "bad alignment" videos floating around on the internet, and when she discovered it was out of alignment she said, "damn, this WOULD make a good story" and reached out for comment. I'm jealous! It's a good story. Someone in this forum even suggested the same thing, asking if I'd be willing to tear down my Podium...

My responses are out of concern for a rider who spent what I consider to be a large amount of money with my company, and not being happy with the results. That's not acceptable to me. It doesn't matter where the customer bought our product; I only ask as it helps with context. In the case of my first post, the rider was trying someone else's fork, so there's no more than I could offer. In regard to the post that you linked...something about the original fork that Skunk Works received just seemed off, and we wanted a longer look...

I guess I should have put an emoji in my comment, as this was meant to be tongue-in-cheek mostly. That being said, it is my understanding that the Dorado fender is a one-piece structure completely integrated into the guards, much like what DVO did, which is different than what we're doing. As for EXT, their system was introduced long after we had begun going down this path. At the end of the day, we'll just have to see how things play out. This is definitely not my area of expertise. PUSH is a very small company compared to companies such...

Darren, I feel like you probably already know this, or at least you should already know it, but this is a ridiculous claim and isn’t a defensible patent based on prior art. There are multiple previously existing fenders for inverted forks have attached the fender to the stanchion guards. Off the top of my head: 1.The Manitou Dorado has had fender a fender that is integrated into the stanchion guards since at least 2019. 2. The EXT Vaia Has a similar type of fender that attaches to the stanchion guards. 3. There are a multitude of motorcycle forks the have...

Did some quick CAD maths. Feel free to correct: Given a 400mm stanchion height and 20mm press distance into the axle/stachion union, a 1mm offset at the non-axle end as observed means the concentricity between the base and the top of the stanchion press union is .05mm or .002". That does not included the perpendicularity between the effective stanchion press interface axis and effective axle axis (axle + threaded sleeve concentricity and size tolerances). If the concentricity is perfect then the resulting stanchion to axle axle angle to get a 1mm offset is 0.144deg. In reality both of these tolerances...

So many factors influence correct spring rate for any given rider/terrain/bike combo, like steep or flat terrain, progressive or linear leverage rate, flat pedals or clips, long legs/short torso (rearward COG) or short legs/long torso (forward COG), preferred reach length relative to height (again, short reach/tall person will have a rearward COG, whereas long reach/short person will have a forward COG). But I think 25-30% sag is a great starting point for all bikes. By always starting with 25 or 30% sag, over time you'll discover whether you're the sort of rider who consistently prefers more sag than recommended or...

Yeah thats pretty much what I was going to say! When they say to start with "sag" I think they are just meaning to set the spring rate full stop, in whatever method so its at least in the ballpark. ie not just bolting it on with whatever spring or pressure it had in the box. And I always like to work through spring rate first - find the point which is definitely too stiff and too soft and then work back in from there. Its amazing how often the "sag" can seem about right and not obviously too stiff...

Setting sag with a repeatable method is the starting point. The most important thing you need to do when setting up suspension is good basic trouble shooting, make one change at a time and record your changes. You will adjust from there, but sag gets you in the ballpark for spring rate. Damping is highly dependent on spring rate, so if your spring rate is way off it's very difficult to get damping set up correctly. My process to setup new suspension is to set sag and then find the manufacturer damper setting recommendations that correspond to that air pressure...

These are great questions. You're absolutely right that sag measurements or recommendations are not sacrosanct or miraculous, and there are instances where more or less sag than recommended is going to yield a better riding bike. But we're talking about nuances that are way, way, way above the average rider, and lightyears above the riders that Jordi is speaking to on those Fox videos. As a company, Fox has to deal with angry customers and bad online reviews from people who are riding three or four spring rates off from correct sag and complaining about the compression settings being "too...

I think it should be time to gatekeep. I've already been calling out creators using AI, I wouldn't be opposed to calling out people who take free stuff from Lewis.

Here's a question that's been ping-ponging around my head for a bit now: is sag actually critically important, or is it just a jumping off point? I see Fox (or at least Jordi), Cane Creek, etc. claiming that sag MUST be set properly before adjusting anything else, but also that the method you use to set sag doesn't really matter as long as it's consistent. If the methodology isn't important, I don't understand how it constitutes useful data and/or how it should be used as the baseline before any other adjustment.

Validating you have the correct spring rate is important. Achieving that with a repeatable sag measurement, data acquisition, gopro recording however you want to do it is not important. What is important is that you have a repeatable process that isn't just based on 'feel'. the various methods for setting sag are a great starting point for consumers to take measurements.

From pit bits

team rumors.

just got pit bits in from rick. transmission DH derailleur and cassette, and more new demo pics below.

I know it's been discussed a bunch already, but got another pic of the new 40 at the Fox pit in Les Gets. Didn't get a pic of the dials, but looks like it's still running Grip X2. Dials looked the same as the current gen 40.

👀

As a tall guys, I’m just here to chime in and say I’m about this. Bring it on. Ready for 32s