Recent Activity
All
sspomer Liked a reply to forum topic The Bikeconomics (Mega)Thread
5/4/2026 5:14pm
This forum topic has 5009 replies.
eastenwreckoning543 Liked a reply to forum topic Sea Otter Classic - 2026
4/18/2026 7:58am This is not radial. "Low Bias" maybe, radial tires have ply oriented perpendicular to the rolling direction, and thats it. No one in this modern "radial" tire fad has made a radial tire yet. All just low bias.
This forum topic has 193 replies.
The Enginerd Added a reply to Sea Otter Classic - 2026
4/17/2026 6:04am “Radial tires” “The plies are placed at a 65 degree angle” Both of those cannot be true. And, is this 65 degrees from horizontal or vertical?
The Enginerd Added a comment about press release The ROTARY TIRE TOOL - Radically Fast and Easy Tire Changes
4/13/2026 4:51pm
This press release has 20 comments.
cameron.hoefer Liked a reply to forum topic THICK grips
4/10/2026 1:32pm
This forum topic has 46 replies.
bicycle019 Liked a reply to forum topic THICK grips
4/10/2026 1:32pm Another Reflex XL user here, tried a bunch of thicker grips and these hit the sweet spot. Ergon GA2 Fat were the previous go to but the Reflex XL has a bit more cush. Used to run ESI Chunky but they pack out too fast and I experienced some palm bruising as they are soft enough where you can get to the bottom of the grip during some, ahem, chunky riding.
This forum topic has 46 replies.
The Enginerd Added a reply to Matching Brand Suspension
4/6/2026 11:38am To add to what’s already been said, I think most ride feel differences between two different suspension brands on a bike would be over shadowed by maintenance intervals. In other words, servicing suspension often is going to make a bigger ride feel difference than having a different brand fork vs shock.
The Enginerd Added a reply to Who rides in pants that aren’t specific MTB pants?
4/2/2026 2:53pm Same, the 686 Everywhere pants are great. Also, Stio Pinedale joggers are my favorite mtb pants. They're made from some indestructible softshell material that a few other brands also use, the fit and warmth/breathability work great for cold weather mtb, and fit slim knee pads underneath better than any actual mtb pant I have used.
ebruner Liked a reply to forum topic Who rides in pants that aren’t specific MTB pants?
4/2/2026 2:50pm I've got some 686 Everywhere pants that are my go to for trail work, camping or riding. They are not as cheap as some non-bike specific alternatives (~110 usd iirc) but they are honestly pretty amazing for all rounders. Great for trips where I am going to be riding and prioritize clothing that can be dual use, without looking like a bike dork when I don't want to.
This forum topic has 58 replies.
PUSH Industries Liked a reply to forum topic Enginerding: Inverted Forks and Front Hubs
3/12/2026 2:11pm I'm the absolute last person you'll need to convince when it comes to inverted forks and the advantages! 😃I believe springs should be coil, and forks should be inverted! 😁
This forum topic has 55 replies.
Brian_Peterson Liked a reply to forum topic The Bikeconomics (Mega)Thread
3/5/2026 7:00pm I believe that the idea behind 15 minute cities wasn't to restrict travel, but to lay out cities where you don't need to travel more than 15 minutes to get what you need. But, in most American cities, a 15 minute drive takes at least 30 minutes and a 15 minute walk is considered to be inhumane.
This forum topic has 5009 replies.
NoahColorado Liked a reply to forum topic The Bikeconomics (Mega)Thread
3/5/2026 6:57pm
This forum topic has 5009 replies.
Primoz Liked a reply to forum topic The Bikeconomics (Mega)Thread
3/5/2026 6:57pm
This forum topic has 5009 replies.
ShapeThings Liked a reply to forum topic The Bikeconomics (Mega)Thread
3/3/2026 7:40pm Speaking for the US only, cycling infrastructure is terrible across the country with only a few bright spots. I have commuted by bike for twenty years and have had so many near death experiences. Public transit in the US is also woefully underfunded and underdeveloped. That’s by design since the US political system has been corrupted by petroleum/auto money for nearly a century. (also add in distance and weather realities) And I could go on…
This forum topic has 5009 replies.
PUSH Industries Liked a reply to forum topic Coil Shock Shootout
3/3/2026 7:23pm That Fluid Focus piston is actually a PUSH piston that we used to sell them as part of our DXH Factory Tuning Kit. I've seen that piston offered by a couple of independent suspension tuners that we used to sell to. Once we stopped offering those types of products, a number of tuners took the parts to local machine shops and had them reverse-engineered because they already had all of the valve codes to go with them.
This forum topic has 222 replies.
The Enginerd Added a comment about press release Race Face Introduces the Era eMTB Wheel
3/3/2026 7:22pm If you want to run 2.6-2.8” tires, yeah, wider rims would be a better fit. But, virtually everyone that I know prefers 2.4-2.5” tires on eebs, which these RF wheels work great with. Fwiw, I’ve been riding the previous gen of these wheels on my eeb for close to 3000 miles and they’ve been great.
This press release has 3 comments.
PUSH Industries Liked a comment about Feature Push Nine One Inverted Fork Review, Part 1
2/12/2026 7:34pm Yes, our warranty is transferable. Better yet, if you have a PUSH product that is out of warranty, or are looking to buy one, we have our Warranty Reset Program. Simply have any PUSH fork or shock serviced at our HQ or one of our many global and domestic Authorized Service Centers. Upon completion of service, your product warranty is renewed for another year, even if it was out of warranty when you sent it in.
This feature has 41 comments.
Uncle Cliffy Liked a reply to forum topic 2026 Team Rumors
1/31/2026 5:19pm
This forum topic has 3180 replies.
The Enginerd Added a reply to 2026 Team Rumors
1/31/2026 3:59pm Norco’s marketing department has figured out how to reach directly into my soul.
Brian_Peterson Liked a reply to forum topic 2026 Team Rumors
1/31/2026 3:59pm
This forum topic has 3180 replies.