Recent Activity
All
Bananamoon Liked a reply to forum topic Tire chat (nerds only)
10/31/2026 1:01pm
This forum topic has 2093 replies.
Sacki Liked a reply to forum topic 2026 MTB Tech Rumors and Innovation - Longer and Slacker
10/30/2026 4:14am First off: Thanks @iceman2058 for sharing this tool here. I just sent it to him one day before to have a look, when we had just put it live, and it's an honour to see it shared amongst other enthusiasts (not to say nerds), like ourselves. @thegromit We were thinking about making the frame specs also indepent between the two setups, and it is easily possible. However, the main idea behind this tool was to be able to play around with different spacers, stem lengths, handlebars and handlebar rotation and to understand what happens when you change this or that...
This forum topic has 7008 replies.
JVP Liked a reply to forum topic Heavy Weight Pants
10/28/2026 12:01pm Where are you looking for durability? Different options for different needs. You can go lighter and still have great durability, but there's always a tradeoff between ultimate abrasion resistance and weight/comfort/heat. I designed Abit Gear pants for everything below except the heavy fabric. NF has good options if you want the pants equivalent of DH tires. Things that make long-lasting pants/shorts: -Waist adjuster (velcro clogging or wearing out): Get something that doesn't use velcro. - Stitching and zips (most common failure): Find pants with YKK Zips and heavier nylon thread. Key stitches at the back need to be a stretch...
This forum topic has 13 replies.
Lordy58 Liked a bike check Spot Diggity 125 Silver Surfer
10/23/2026 4:52am
This bike check has 8 comments.
sspomer Liked a reply to forum topic 2026 MTB Tech Rumors and Innovation - Longer and Slacker
9/23/2026 11:36pm
This forum topic has 7008 replies.
Downtime Podcast Liked a reply to forum topic 2027 Team Rumors
9/17/2026 12:02pm
This forum topic has 417 replies.
JohntheElevator Added a reply to 2027 Team Rumors
8/25/2026 12:25pm As far I know, I dont see how a new track could be built on Mont Chery. Les Gets town council has recently cancelled it after publishing results from a public survey (farmers have been pretty vocal during it).
skwattypotty Liked a reply to forum topic The best lightweight tyre insert for protecting your rim?
8/13/2026 12:18am I will preface everything I am about to say by mentioning that I work for a wheel company, and as such I have an unusual capability to replace wheels. I am very very lucky to be where I am and as such this can be taken with a grain of salt. With that being said... Inserts for alloy rims are a tough sell for me. I am not an exceptional rider, nor am I particularly heavy rider(165lbs with kit), and I have destroyed an aluminum rim despite running a heavy Cushcore insert. Somewhere on this website there is an excellent...
This forum topic has 25 replies.
benconnor Liked a reply to forum topic Suspension Data Acquisition
8/5/2026 12:35pm I have a hosted demo (read-only) version of by analysis software live at demo.bodaqs.net . No installation needed, just follow the link. If you want, there are some short familiarization videos on YouTube, here . As usual, I welcome and encourage all feedback. I'm aiming for a quality product here, and I'm grateful for the insight others have brought to it this far. I'll be publishing the most recent logger design this week too - stay tuned :-) Build website: bodaqs.net Instagram.com/bodaqs Github.com/benconnor1972/bodaqs https://discord.gg/rpqqWbtwXJ
This forum topic has 539 replies.
JohntheElevator Added a reply to 2026 Andorra World Cup
7/10/2026 1:44am Mistake by YouTube auto-translation. At the end, Flo said "c'est un piste qui reste très très mono-traj' " meaning that you mainly have only one ("mono") line/trajectory and not so many alternative lines.
JohntheElevator Added a reply to 2026 Andorra World Cup
7/9/2026 6:46am Trackwalk by Fast AF:
notseanday Liked a reply to forum topic Good Industry Jobs: Post Them Here!
5/16/2026 6:26am Social media / Marketing position based in Ranco Cucamonga or Suwannee GA for Maxxis https://maxxis.bamboohr.com/careers/79 An entry level bike tire design and development engineer position in Suwannee soon to open as well. I work at Maxxis as a bike tire engineer and can put those with questions in touch with the relevant folks.
This forum topic has 4 replies.
moridinbg Liked a reply to forum topic Suspension Data Acquisition
4/30/2026 6:56am I love the DIWhy vibes from the last few pages 😍 I have been working a lot on the App and the Firmware for the mast month or so. I have made a lot of progress into packaging it into end to end usable, both on desktop and mobile. Major changes Live data! Now you can stream the sensor readings from a connected DAQ in more or less real time (20-30ms delay). You can set the time on the DAQ and you can edit and replace the configuration, without dealing with memory cards and text files! You can also change...
This forum topic has 539 replies.
moridinbg Liked a reply to forum topic Suspension Data Acquisition
4/30/2026 6:55am My setup is linkage driven with bearings and cheap rotational sensors ($3 each) The kinematics setup in the app then translates the angle of rotation of the sensor into shock/wheel travel. The firmware/app also support linear sensors. I have compiled extensive documentation on both the firmware architecture, hardware build and daq operation. There is another architecture document for the app which explains the telemetry and kinematics calculations.
This forum topic has 539 replies.
gold_007 Liked a bike check A Girl's Dream DJ -- Purple, Flowers and Sparkles
4/24/2026 4:02am
This bike check has 3 comments.
CamNeelyCantWheelie Liked a reply to forum topic Dumb Bike Problems
4/22/2026 12:21pm Added a couple new notches in the idiot belt recently: My Maven brakes started getting air in the levers and fouling bleeds fairly quickly. First the front, then the rear, then the front again. WTF? Wandering bite point and general ranting ensues for a bit... Further investigation reveals that I had not tightened the hose compression nut to the lever anywhere near the proper 8nm torque. I got at lest a turn and a half on each nut with the crow foot torque wrench. Fresh bleed and haven't had an issue yet this season. Ran the loose hoses for at...
This forum topic has 310 replies.
Eoin Liked a reply to forum topic Who rides in pants that aren’t specific MTB pants?
4/2/2026 1:58pm I have 4 pairs of decathlon hiking pants that cost €30 each. They are lighter than a fox flexair, have 4 zippered pockets and are extremely stretchy. I can have a phone in one pocket, snacks in another, car keys in another and still have a spare pocket. I do bug rides all year long and haven't worn a backpack in years (tools on bike). Decathlon now do a decent MTB pant that is a racier fit, but with only 2 pockets so I prefer the hiking one most rides. I bring this up every occasion I can: TLD oversenders...
This forum topic has 58 replies.
JohntheElevator Added a reply to Who rides in pants that aren’t specific MTB pants?
4/2/2026 1:55pm +1 for Decathlon hiking pants. Good Q/P. Good for hiking, mtbing, even for working on field (hydrogeology - anyone from a National Geol Survey here? 😇).
Big Dos Liked a reply to forum topic Concussion
3/19/2026 1:42am Just a Concussion Hayden Wright and Jaimi Parr Far too often, the phrase “ just a concussion ” is used to downplay the severity of head injuries sustained in crashes. A knock to the head is frequently considered minor—especially when compared to broken bones or torn ligaments. But the reality is far more complex. In early 2025 long-time contributor Hayden Wright experienced a crash, resulting in a concussion that brought with it symptoms which persisted for months. Though invisible to others, the effects were deeply debilitating, with impacts noticed through every part of day-to-day life. In search of answers and...
This forum topic has 17 replies.
woohoo Liked a reply to forum topic 2026 Team Rumors
3/13/2026 5:25am
This forum topic has 3217 replies.