Recent Activity
All
christiandumitru Liked a bike check Santa Cruz V10.8
10/19/2024 4:51pm
This bike check has 12 comments.
Dusan_Bilbija Liked a bike check Liteville 601 mk1
10/18/2024 5:31pm
This bike check has no comments yet.
pinkrobe Liked a reply to forum topic MTB Tech Rumors and Innovation
10/18/2024 5:28pm
Vault hubs from Race Face can go between 20, 15 and 12 in front. The same hub design is used for RF mountain wheels and Easton road wheels.
This forum topic has 30430 replies.
jonkranked Liked a reply to forum topic MTB Tech Rumors and Innovation
10/18/2024 5:28pm
hadley, i9, dtswiss immediately come to mind (i've done so with all 3 brands). i'm sure there's more. nerd fact: my oldest hadley is a 20mm front hub circa 2002, long before 15mm hubs were a standard - and i was able to get a conversion kit for it.
This forum topic has 30430 replies.
Erwan_Ghesquiere Liked a reply to forum topic MTB Tech Rumors and Innovation
10/18/2024 5:28pm
Fair enough for the 6bolt limitation. You took me back in time with the original Maxle, I forgot it used to be like that, which is a much better design than most (all ?) 15mm axles currently on the market. As for the use of quick release, how often do we actually need to remove our wheels ? Unless you have to toss your bike in your car this is very rare, especially if you ride tubeless and most repairs are stuffing a bacon strip in the tire and pumping it back-up.
This forum topic has 30430 replies.
cooper francia Liked a bike check 2022 Canyon spectral 27.5 signed by Sam Pilgrim
10/18/2024 11:13am
This bike check has no comments yet.
Corentin_F Liked a bike check Orbea Occam M10 2024 MyO
10/18/2024 11:12am
This bike check has no comments yet.
santiago.arenasz Liked a bike check Lapierre spicy team 2022 enduro/downhill
10/18/2024 5:10am
This bike check has 2 comments.
carlinojoevideo Liked a reply to forum topic Stiffness versus Compliance
10/17/2024 9:13am
Another area that can help the ride feel that I think is really over looked is spoke diameter and tension. But the biggest area for improvement in my opinion that is needed is frame compliance, everything is a bandaid fix for stiff chassis. Personally I’ve never rode a bike with a front end that is too soft, rear end yes.
This forum topic has 37 replies.
carlinojoevideo Liked a reply to forum topic Stiffness versus Compliance
10/17/2024 9:13am
Carbon wheels have come a long way and wayyy over built when they first came on the market. Check out this from Enve new rims and Crank Bros, things are definitely going in a better direction for consumers.
This forum topic has 37 replies.
TEAMROBOT Liked a reply to forum topic MTB Tech Rumors and Innovation
10/16/2024 7:26pm
Arguably, many traditional rightside-up forks could benefit from more torsional flex, which is why the 15mm vs. 20mm axle argument never seemed like the end of the world. Traditional forks suffer from excessive fore/aft flex compared to their upside-down brethren, but traditional forks have torsional rigidity to spare. Fox famously engineered more torsional flex into the chassis in 2014 when they released the air-sprung 40, based on their pro rider feedback. If their World Cup pro's need more torsional flex, to me that says something.
This forum topic has 30430 replies.
mscofield4 Liked a reply to forum topic Thoughts on the current generation of forks
10/16/2024 7:04pm
Ohlins used to do this on the RXF 36 back in 2017-2018. I'm running one right now with the m.2 lowers and internals. They even included the crown race into the shape of the steer tube. Literally zero flex points for it to creak. It was brilliant in my opinion but too many people complained that they couldn't run their headset of choice.
This forum topic has 89 replies.
Suns_PSD Liked a reply to forum topic Stiffness versus Compliance
10/16/2024 7:04pm
Frame stiff but maybe the chainstay compliant, wheels compliant radially yet stiff laterally. Stem stiff, bars compliant but then only in one plane if you line up very faded little marks. Seat post stiff, but compliant seat. Fork stiff fore-aft, yet compliant in some other direction for better tracking. Hub should have instant engagement, except while rolling at which time they should have decidedly poor engagement. That should do it, the perfect bike if you will (wheel?). Oh yah, add compliant radial tires.
This forum topic has 37 replies.
carlinojoevideo Liked a reply to forum topic Stiffness versus Compliance
10/16/2024 7:03pm
Personally I feel that most frames are overbuilt and too rigid for the average rider. After watching in person the pros at MSA, it’s clear that the forces they are putting into the bike are absolutely unreal. So a frame to a top 30 rider I can understand why they get to that stiffness level to give them the support they need. I’m a believer in that we should have a consumer spec and race spec. Right now, the Commencal Supreme V5, Frameworks and Atherton are riding the fine line of what feels good to a consumer yet can deliver...
This forum topic has 37 replies.
retro_freeride Liked a bike check 24 Bicycles Po#n King with Marzocchi Shiver DC 2002
10/16/2024 2:55pm
This bike check has 5 comments.
spitznagel.ch Liked a bike check BiXS Sign E23 2024
10/16/2024 2:53pm
This bike check has no comments yet.
Nico_Hrndz Liked a reply to forum topic MTB Tech Rumors and Innovation
10/16/2024 9:30am
Vojo magazine posted a few new things here and there, regarding last Roc d'Azur: Including a few Polygon """protos""" : And more interesting, the Beringer ebike (we already knew about their mtb brakes, wasn't aware of the frame development) which is made from cast aluminium. As an absolutely-not-engineer guy I like seeing these kind of attempts on frame material, but some may have another perspective I guess... (regardless of kinematics / geo)
This forum topic has 30430 replies.