2026 MTB Tech Rumors and Innovation - Longer and Slacker

Related:
jones007
Posts
141
Joined
12/9/2025
Location
SEASIDE, CA, USA
1 day ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

2
1 day ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

jones007 wrote:
I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is...

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the bike and rider. 

image 866
11
sollie
Posts
28
Joined
5/7/2025
Location
Longmont, CO, USA
1 day ago

So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so your brakes have the same leverage ratio on the wheel, you'll have a very similar braking experience compared to a 29er? But perhaps easier, since you'll have a longer contact patch on the 32"? 

1
23 hours ago Edited Date/Time 23 hours ago
sollie wrote:
So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so...

So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so your brakes have the same leverage ratio on the wheel, you'll have a very similar braking experience compared to a 29er? But perhaps easier, since you'll have a longer contact patch on the 32"? 

I think that is a fair assessment, although another variable to consider is heat. While a larger rotor is beneficial to react to the ~10% increased leverage ratio for absolute stopping force, the heat that needs to be dissipated is only 1% higher, so the brakes may run slightly cooler than the original 29er, smaller rotor setup. This may be counteracted by the decreased rolling resistance and decreased cornering ability of bigger wheels, so the rider may need to brake more anyway, leading to more heat in the rotors. 

All that is to say, when we're talking about differences this small, there are too many variables to meaningfully come away with any conclusion from these theoretical thought experiments. Just go ride a bike and have fun. Choose a rotor size and be a dick about it. 

2
sollie
Posts
28
Joined
5/7/2025
Location
Longmont, CO, USA
23 hours ago

Anecdotally, I did a continuous 3000ft decent on my 32" gravel bike with 180mm rotors and they definitely got too hot... glazed the rear pads. That's with a ~260lb system weight. I was still stopping fine though, and was able to lock up the wheels whenever I wanted with Sram gravel brakes. For an XC/downcountry MTB I'd probably want 200 rear, and 200 or 220 front, which is what I run on my Enduro 29er. So I'd say the +20mm rotor rule of thumb is reasonable. 

1
1
hairyyy
Posts
60
Joined
12/10/2018
Location
AD
23 hours ago

Tech rumours. 

Tech. 

Rumors. 

 

33
23 hours ago

It doesn't feel like a big stretch in terms of the thread's intentions to also discuss the ancillary implications of those tech rumors. 

 

17
1
23 hours ago
hairyyy wrote:

Tech rumours. 

Tech. 

Rumors. 

 

I know this forum often goes off topic, but I feel like brake rotor size implications due to wheel size changes falls squarely in the " and Innovation" part of this thread. 

19
hairyyy
Posts
60
Joined
12/10/2018
Location
AD
23 hours ago
hairyyy wrote:

Tech rumours. 

Tech. 

Rumors. 

 

I know this forum often goes off topic, but I feel like brake rotor size implications due to wheel size changes falls squarely in the "...

I know this forum often goes off topic, but I feel like brake rotor size implications due to wheel size changes falls squarely in the " and Innovation" part of this thread. 

How?

I'll sum it up. Bigger the wheel the bigger the rotor needed. 

3
Eae903
Posts
550
Joined
10/20/2023
Location
Not Saying., WY, USA
Fantasy
23 hours ago
hairyyy wrote:

Tech rumours. 

Tech. 

Rumors. 

 

Hi, I'd like a forum about tech rumors and innovation

Ok, 

Hold the discussion. 

Hold the discussion? 

And the technical content. 

And the technical content? Hey, get this man a forum of nothing 

9
1
23 hours ago
hairyyy wrote:

How?

I'll sum it up. Bigger the wheel the bigger the rotor needed. 

Well shit.  Why didn't you say that 3 pages ago?

4
TheKaiser
Posts
149
Joined
11/21/2023
Location
Storrs, CT, USA
21 hours ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

jones007 wrote:
I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is...

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

These questions are basically the inverse of the "big wheels will accelerate more slowly" debates when 27.5" and 29" were coming out. If I recall correctly, while the larger wheel's weight is farther from the center, the effect is neutralized due to the slower rotational speed that comes with the larger circumference. As a result, the net effect of slower acceleration (or deceleration in the context of this braking question) is purely related to the total change in weight, not the fact that its further from center. That doesn't mean the bigger wheels won't "feel" more sluggish, but the actual measurable effect is minimal.

1
Jotegr
Posts
404
Joined
6/28/2024
Location
Interior, BC, CA
20 hours ago Edited Date/Time 20 hours ago
26aintdead wrote:
There is a button in the lower left corner of your screen called 'Start New Topic'. This is for people how want to talk about damaged...

There is a button in the lower left corner of your screen called 'Start New Topic'. This is for people how want to talk about damaged TR11 frames, big disc rotors, RockShox recall, and other sh*t that has nothing to do with the topic of this thread. Please leave.

Yeah, this thread is exclusively for discussions regarding chainstay lengths!

 

It's kinda slow season for releases. I think we've collectively lightened up on staying on topic for a little while. 

11
2
onxx
Posts
87
Joined
6/24/2025
Location
Laguna Beach, CA, USA
14 hours ago
hairyyy wrote:

How?

I'll sum it up. Bigger the wheel the bigger the rotor needed. 

toast2266 wrote:

Well shit.  Why didn't you say that 3 pages ago?

People did. People doubted, people didn't understand. And I think people resisted getting overly technical in their explanations. These are scalar functions and if you only change the one variable (wheel radius) you don't really need to solve 5 equations 5 times, they are all inversely proportional to wheel radius so you calculate 10% once and boom, done, everything is 10%. Which is why I said 2 days ago it's basically a rotor size, and then started talking about other effects before...foreshadowing 🤣

The robots are pretty freaking good people.  Even if you don't believe in the robots, this shit is hard to fuck up, they can explain it to you 1000 different ways with graphs and charts and interactives etc. Probably even the super mega dumb free versions... 

5
6 hours ago
hairyyy wrote:

How?

I'll sum it up. Bigger the wheel the bigger the rotor needed. 

toast2266 wrote:

Well shit.  Why didn't you say that 3 pages ago?

onxx wrote:
People did. People doubted, people didn't understand. And I think people resisted getting overly technical in their explanations. These are scalar functions and if you only...

People did. People doubted, people didn't understand. And I think people resisted getting overly technical in their explanations. These are scalar functions and if you only change the one variable (wheel radius) you don't really need to solve 5 equations 5 times, they are all inversely proportional to wheel radius so you calculate 10% once and boom, done, everything is 10%. Which is why I said 2 days ago it's basically a rotor size, and then started talking about other effects before...foreshadowing 🤣

The robots are pretty freaking good people.  Even if you don't believe in the robots, this shit is hard to fuck up, they can explain it to you 1000 different ways with graphs and charts and interactives etc. Probably even the super mega dumb free versions... 

Mass and diameter have a linear relationship within a certain range, but energy, velocity, and moment of inertia are not linear. As I calculated, the energy only increases by <1%, when the diameter increases by 10%. That's not something anyone can intuit with any level of accuracy. 

And yes, the robots can definitely fuck up. If you ask AI to write some MATLAB code to write any optimization or analysis code that any engineering sophomore could do, it will spit out something with 5x as many lines, overly complicated processes, and half wrong equations that it combined from 10 different pdfs using incompatible units. Trust me, I've tried. Pretty charts and interactives don't mean something is more correct, they just mean it's prettier. 

I wonder how long it will be until we see this phenomena cause problems in the bike industry. Bike companies, especially small ones, have very small development budgets, small engineering teams (if it's more than one person), and increasing financial pressures, coupled with a high level of enthusiasm to try new things and build boutique frames. I think in the next couple years we're going to get some guy, overzealous about AI, try to make the next new startup brand designed by AI, backed by all kinds of hallucinated FEA screenshots and topology optimization. And it will not be a good bike. I don't know how to make a better bike than the professionals, and most people don't. AI makes people feel smart, just like a top fuel dragster would make a regular person the fastest commuter on i95. 

4
4
6 hours ago

Speaking of Tech Rumors, have any other brands been rumored to be working on quick connect systems like Magura recently released? That's one of the biggest annoyances with switching frames, because the rear brake hose gets shorter every time when you cut the end off. 

3
HexonJuan
Posts
420
Joined
6/10/2015
Location
USA
5 hours ago
Speaking of Tech Rumors, have any other brands been rumored to be working on quick connect systems like Magura recently released? That's one of the biggest...

Speaking of Tech Rumors, have any other brands been rumored to be working on quick connect systems like Magura recently released? That's one of the biggest annoyances with switching frames, because the rear brake hose gets shorter every time when you cut the end off. 

Formula has their own version, but there's also Zeno: https://zenocycleparts.com/collections/q-connector-bicycle-hydraulic-qu…

3
nskerb
Posts
395
Joined
3/3/2020
Location
Kelso, WA, USA
4 hours ago

I’m not gonna get too far into the weeds on this brake stuff but I don’t really see how this is a debate. Bigger wheels need bigger rotors to get the same out of a same brake. 

Put a 220m rotor on a 26” bike and put a 160mm rotor on a 32” bike. I’m not an engineer but I’m pretty confident this experiment would prove itself. 

5
hairyyy
Posts
60
Joined
12/10/2018
Location
AD
3 hours ago
toast2266 wrote:

Well shit.  Why didn't you say that 3 pages ago?

onxx wrote:
People did. People doubted, people didn't understand. And I think people resisted getting overly technical in their explanations. These are scalar functions and if you only...

People did. People doubted, people didn't understand. And I think people resisted getting overly technical in their explanations. These are scalar functions and if you only change the one variable (wheel radius) you don't really need to solve 5 equations 5 times, they are all inversely proportional to wheel radius so you calculate 10% once and boom, done, everything is 10%. Which is why I said 2 days ago it's basically a rotor size, and then started talking about other effects before...foreshadowing 🤣

The robots are pretty freaking good people.  Even if you don't believe in the robots, this shit is hard to fuck up, they can explain it to you 1000 different ways with graphs and charts and interactives etc. Probably even the super mega dumb free versions... 

Mass and diameter have a linear relationship within a certain range, but energy, velocity, and moment of inertia are not linear. As I calculated, the energy...

Mass and diameter have a linear relationship within a certain range, but energy, velocity, and moment of inertia are not linear. As I calculated, the energy only increases by <1%, when the diameter increases by 10%. That's not something anyone can intuit with any level of accuracy. 

And yes, the robots can definitely fuck up. If you ask AI to write some MATLAB code to write any optimization or analysis code that any engineering sophomore could do, it will spit out something with 5x as many lines, overly complicated processes, and half wrong equations that it combined from 10 different pdfs using incompatible units. Trust me, I've tried. Pretty charts and interactives don't mean something is more correct, they just mean it's prettier. 

I wonder how long it will be until we see this phenomena cause problems in the bike industry. Bike companies, especially small ones, have very small development budgets, small engineering teams (if it's more than one person), and increasing financial pressures, coupled with a high level of enthusiasm to try new things and build boutique frames. I think in the next couple years we're going to get some guy, overzealous about AI, try to make the next new startup brand designed by AI, backed by all kinds of hallucinated FEA screenshots and topology optimization. And it will not be a good bike. I don't know how to make a better bike than the professionals, and most people don't. AI makes people feel smart, just like a top fuel dragster would make a regular person the fastest commuter on i95. 

You still harping on about this. 

1
Blake_Motley
Posts
303
Joined
11/14/2013
Location
Chula Vista, CA, USA
3 hours ago Edited Date/Time 2 hours ago
Mass and diameter have a linear relationship within a certain range, but energy, velocity, and moment of inertia are not linear. As I calculated, the energy...

Mass and diameter have a linear relationship within a certain range, but energy, velocity, and moment of inertia are not linear. As I calculated, the energy only increases by <1%, when the diameter increases by 10%. That's not something anyone can intuit with any level of accuracy. 

And yes, the robots can definitely fuck up. If you ask AI to write some MATLAB code to write any optimization or analysis code that any engineering sophomore could do, it will spit out something with 5x as many lines, overly complicated processes, and half wrong equations that it combined from 10 different pdfs using incompatible units. Trust me, I've tried. Pretty charts and interactives don't mean something is more correct, they just mean it's prettier. 

I wonder how long it will be until we see this phenomena cause problems in the bike industry. Bike companies, especially small ones, have very small development budgets, small engineering teams (if it's more than one person), and increasing financial pressures, coupled with a high level of enthusiasm to try new things and build boutique frames. I think in the next couple years we're going to get some guy, overzealous about AI, try to make the next new startup brand designed by AI, backed by all kinds of hallucinated FEA screenshots and topology optimization. And it will not be a good bike. I don't know how to make a better bike than the professionals, and most people don't. AI makes people feel smart, just like a top fuel dragster would make a regular person the fastest commuter on i95. 

>write some MATLAB code to write any optimization or analysis code that any engineering sophomore could do

I have no dog in this fight but I think you are greatly overestimating the quality of this country’s engineers 

1
Suns_PSD
Posts
418
Joined
10/7/2015
Location
Austin, TX, USA
2 hours ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

jones007 wrote:
I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is...

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the...

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the bike and rider. 

image 866

I knew a guy that lost 40 rwhp on a dyno, only measuring the rear wheels so you can double that, when he swapped from Mag 17" wheels to 20" wheels of the same OD on his C5 Corvette.

I've swapped rims and tires enough to know that big rims and tires have a detrimental effect on braking and acceleration. That's commonly adding <150# total weight on to a 6500# pickup truck, about 2%. Yet it's very obvious.

2
2 hours ago
Suns_PSD wrote:
I knew a guy that lost 40 rwhp on a dyno, only measuring the rear wheels so you can double that, when he swapped from Mag...

I knew a guy that lost 40 rwhp on a dyno, only measuring the rear wheels so you can double that, when he swapped from Mag 17" wheels to 20" wheels of the same OD on his C5 Corvette.

I've swapped rims and tires enough to know that big rims and tires have a detrimental effect on braking and acceleration. That's commonly adding <150# total weight on to a 6500# pickup truck, about 2%. Yet it's very obvious.

A forty horsepower loss at the wheels is wild.  Holy shit.

2
lewzz10
Posts
115
Joined
10/8/2015
Location
GB
1 hour ago Edited Date/Time 1 hour ago
jones007 wrote:
I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is...

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the...

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the bike and rider. 

image 866
Suns_PSD wrote:
I knew a guy that lost 40 rwhp on a dyno, only measuring the rear wheels so you can double that, when he swapped from Mag...

I knew a guy that lost 40 rwhp on a dyno, only measuring the rear wheels so you can double that, when he swapped from Mag 17" wheels to 20" wheels of the same OD on his C5 Corvette.

I've swapped rims and tires enough to know that big rims and tires have a detrimental effect on braking and acceleration. That's commonly adding <150# total weight on to a 6500# pickup truck, about 2%. Yet it's very obvious.

That’s not how power works. The mass of a rotating assembly is not related to the power it consumes at a given speed. Whilst you can record a difference from wheel or flywheel weight on an inertia dyno, on a steady state dyno your friend would see the same peak power regardless of mass.


Edit - this is majorly off topic! Happy to continue elsewhere.

1
2

Post a reply to: 2026 MTB Tech Rumors and Innovation - Longer and Slacker

The Latest