Recent Activity
All
noideamtber Added a reply to 2025 Team Rumors
1/20/2025 12:24pm The change in Camera is from the massive push from insta360, lots of influences are being paid to talk bad about gopro currently. Theres several people on the Pivot team that dont make sense like Ed masters... why is he still there? matt walker is pretty good on the enduro rig but lacks support. jenna... well we know... Is morgane...
More »
noideamtber Added a reply to The Bikeconomics (Mega)Thread
1/17/2025 12:09pm I think theres a bit of drama around YT with Aus/NZ - Day Zero NZ got dropped by YT and picked up by pushy's so had to pay to ship from aus to NZ - but recently Day zero has it back???? The 'limited' core range is often never available in nz either - carbons seems like a good ish...
noideamtber Added a reply to The great Headset Debate
1/13/2025 10:19pm Slack-R IS Kits – 9point8
noideamtber Added a reply to MTB Tech Rumors and Innovation
1/13/2025 9:50pm Those oneup pedals are the SPD answer to CB, no rubbish 'play/icy/metal on metal feeling' anymore solid pedal to shoe contact. Might finally make me switch to SPD - got my preorder in already!
owl-x Liked a reply to forum topic MTB Tech Rumors and Innovation
1/13/2025 9:49pm
We are now, still, yes.
This forum topic has 30430 replies.
marzbomber888 Liked a reply to forum topic MTB Tech Rumors and Innovation
1/13/2025 8:12pm
It didn’t fit because they couldn’t get it to. Also that bike has a 40% progression rate. It’s a joke of a dh bike that people sac ride because of the bro culture.
This forum topic has 30430 replies.
nato Liked a reply to forum topic MTB Tech Rumors and Innovation
1/13/2025 6:09pm
Only time will tell eh, they did mention the pedals ship with a thin socket so you can service them easier.
This forum topic has 30430 replies.
noideamtber Added a reply to The great Headset Debate
1/13/2025 1:21pm I think Digit Bikes Kinda coverd the part about the frame damage/wear on an IS headset, where as if a Press-fit frame was to wear it bsically ruin the frame. Most of my bikes have been IS or brands own special ones for adjustable headsets with the odd zs44/56 frame in there. IS52 headsets, which are common on Ebikes and...
owl-x Liked a reply to forum topic 2025 Team Rumors
1/13/2025 1:03pm
Ghosting Sam Hill? They’re gonna be kicking themselves after he wins that easy Tasmania Hardline race by 25 seconds.
This forum topic has 3512 replies.
zundawg23 Liked a reply to forum topic 2025 Team Rumors
1/13/2025 8:58am
The fact that the only two flat tyres (I think) at hardline wales last year was jono and Matt Jones who both run good year tells you everything you need to know
This forum topic has 3512 replies.
noideamtber Added a reply to MTB Tech Rumors and Innovation
1/12/2025 11:20pm all he said was the bike was disappointing for anything other than... in his words "flying to south africa with Sam Reynolds and doing big F%$k off jumps" - He was on a Spire with 190mm fork. I didnt really ride with him like I hoped because he rode off so damn fast I had no chance haha
noideamtber Added a reply to 2025 Team Rumors
1/12/2025 10:53pm ol matt jones had sh1t loads. whatever pays the bills i suppose.
Carraig042 Liked a reply to forum topic 2025 Team Rumors
1/12/2025 10:51pm
Must have had too many flats.
This forum topic has 3512 replies.
Digit Bikes Liked a reply to forum topic The great Headset Debate
1/12/2025 7:34pm
It wouldn’t affect my buying decision. Here are some factors I consider when designing for a frame: IS head tubes have existed for about 20 years I’ve never seen a cracked one, whereas I have seen cracked press fit head tubes. This seems more important than angleset compatibility especially if I get to design the HT angle. This crack resistance is because with IS the highest stresses areas are recessed inboard from the head tube opening*, and there’s no press-fit-hoop-stress**. Both IS and ZS allow the down and top tubes to be further separated than EC; and the head tube...
This forum topic has 31 replies.
noideamtber Added a reply to 2025 Team Rumors
1/12/2025 4:16pm not really race team related but sam pilgrim off good year. Trialing Conti's
noideamtber Started a new thread The great Headset Debate
1/12/2025 3:51pm Right, this came up on a ride the other day and im curious what the superior site thinks, Ill add a poll and we can discuss IS - the bearings sits direct into the frame with a Mated surface, Common being IS41 and now common IS52(ICR etc) Pressfit cups - Cups are pressed into the Frame With Bearings Pre fitted...
This forum thread has 31 replies.
chriskief Liked a reply to forum topic 2025 Team Rumors
1/12/2025 11:44am
For those playing along at home, here’s where we stand with the most ridiculous rumors so far… #3 - Phoebe Gale off FMD, going to Reece Wilson’s new AON team, after being prominently featured in the Orbea FMD press release. #2 - Aaron Gwin back to mentor the kids on lower budget Trek Factory after becoming a partner in Crestline bikes last year. #1 - Old man Dan Atherton returning to stomp $$$ DH podiums on a prototype belt drive after his most recent 57th at a 2018 Crankworx stop. There’s a few others close to the top 3, but...
This forum topic has 3512 replies.
mountainbiking5484 Liked a reply to forum topic Why are there still no 200mm+ Enduro bikes?
1/12/2025 12:33am
Hello, I have just come across your enduro mountain bike. Do you have the capacity to make 3 of these and to skip them to the UK, one in extra large S6, two in large S5, and one in medium S3? s = specialized specification
This forum topic has 54 replies.
anotherbikerguy Liked a reply to forum topic The Bikeconomics (Mega)Thread
1/11/2025 9:04pm
If y'all keep this up Spomer's gonna start a new thread for Industry Nine reviews. Back on topic, please?
This forum topic has 5321 replies.
noideamtber Added a reply to MTB Tech Rumors and Innovation
1/11/2025 7:19pm isnt that a new spire that they are looking at making DH compatible? I remember talking to a Transition sponsored person in QT last year and he said the Tr11 is a bit of a flop. so wonder if the spire will be full 200mm in a DH configuration?