Recent Activity
All
Lolo.ch Added a comment about bike check Unchained Bicycles - Proto V1
4/5/2026 11:13pm
This bike check has 5 comments.
iceman2058 Liked a comment about bike check Unchained Bicycles - Proto V1
4/5/2026 1:04pm
This bike check has 5 comments.
bigbrett Liked a comment about bike check Unchained Bicycles - Proto V1
4/5/2026 1:04pm
This bike check has 5 comments.
ZAKBROWN! Liked a comment about bike check Unchained Bicycles - Proto V1
4/5/2026 1:04pm
This bike check has 5 comments.
Lolo.ch
Added bike check Unchained Bicycles - Proto V1
4/4/2026 2:38am
SleepingAwake Liked a bike check Kaleidoscope - Home Made Carbon Frame
11/19/2025 4:23am
This bike check has 10 comments.
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/8/2025 12:55pm The load cases we used are mainly based on the EFBE Tri-Test (Cat 5). EFBE is a German company specialized in frame testing. I can’t share the exact load cases since they’re proprietary, but EFBE can provide the official documentation once you pay an advance or deposit. You can also find some useful hints in their public test videos on...
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/7/2025 1:03am Thanks Steve. This is really appreciated. To be honest, we haven’t tested it in muddy conditions yet. However, as the pockets face outward, mud thrown by the tire is unlikely to accumulate. If it does, a pressure washer should easily clean it off.
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/7/2025 12:58am We’re currently working on the website, but our main focus is on testing for now. We expect to launch the first batch by mid-next year, or sooner. We are based in Vevey, near Lausanne. Don't hesitate to contact me if you'd like to test it out.
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/6/2025 9:42am In fact there are two models of Effigear. The one you mention has an offset output shaft. We didn’t go with this one as we wanted to be able to tweek the anti squat value by placing the idler where we want. The other one, the mimic, has only nine gears and can only downshift if we release the power...
hamncheez2003 Liked a reply to forum topic Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/6/2025 12:28am
This forum topic has 34 replies.
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
11/5/2025 2:06am We made it! Follow us on Instagram Thanks for your comments.
Thadeus Liked a bike check NAF BrokeR, home made high pivot trail bike
6/13/2025 12:20am
This bike check has 9 comments.
SupremeShreder42 Liked a bike check Unno Mith Custom
5/29/2025 1:19pm
This bike check has no comments yet.
Lolo.ch Added a reply to Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
5/28/2025 8:18am Here’s a quick update: The design is 95% complete — just a few small parts left to fine-tune. The finite element simulation is done and looks promising. Some shapes had to be optimized to reduce stress concentrations, and we’ve achieved a solid safety factor (to be confirmed with real-world and bench testing, of course). The rear triangle has been tuned...
bimotal_neil Liked a bike check Archibald AC1 Super Enduro with Bimotal Elevate
5/4/2025 11:47am
This bike check has no comments yet.
cammonteith Liked a bike check Factory Cycles Squatcho Titanium
4/28/2025 12:56am
This bike check has no comments yet.
Nico_Hrndz Liked a reply to forum topic Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
4/14/2025 2:55am
This forum topic has 34 replies.
reynolds666 Liked a reply to forum topic Unchained Bicycles – Pinion / Belt / 7075 Bonded Frame / 170-170mm
4/10/2025 10:13am
This forum topic has 34 replies.