Recent Activity
All
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/17/2024 7:16am I just split the difference by eye between the before and after in this photo, did a bleed, and so far no pump-up.
More »
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/16/2024 11:43am Anyone know why the SRAM 17p adapter which is designed for going 203-220 has a note saying "will not work on 203 fork" ? The post mount spacing is the same front and rear right? Is it just SRAM being dicks to Fox?
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/16/2024 9:02am Yes just came on here to report this issue today at the bikepark haha. Pumped up too much after a long descent. Even weirder : adjusting the contact the normal way with the small T9 torx would "reset" the lever. Meaning that turning the contact adjuster one way then the other back to the same initial position would somehow restore...
AndehM Liked a reply to forum topic Nerding out on Brakes shall we? Not another tech deraliment
6/15/2024 5:30pm
Damn, so I just did this on both my sets. It's a massive difference in feel for just a tiny adjustment, and my one odd feeling lever definitely had the ball further out. I changed all my levers to just barely clear the pivot, like you did, and the ones on my bike with fresher pads feel like Saints now lol. The worn out semi-metallics on the other bike feel more normal, but still much sharper than before.
This forum topic has 2941 replies.
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/14/2024 1:26pm Here's a side by side. Factory setting on the left vs the throw reduced on the right.
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/14/2024 1:04pm Made some progress with the Hayes Dominion excessive dead throw issue! For anyone with who's interested, here's the fix : 1. Remove the lever - two torx screws top and bottom, then wiggle it out. 2. Loosen the small grub screw (green arrow). 3. Tighten the ball-head screw as far as you can without it rubbing (red arrow) 4. Tighten...
gibbon Liked a reply to forum topic MTB Tech Rumors and Innovation
6/13/2024 10:48am
Content cannot be rendered.
This forum topic has 30444 replies.
TheFBI Added a reply to MTB Tech Rumors and Innovation
6/13/2024 9:43am Interesting that Fox are going the other way and adding more damping with their products. I've heard from tuners that an under-damped fork can mean the tyre rebounds off obstacles without enough damping to control it, and briefly loses contact with the ground, which breaks traction.
TheFBI Added a reply to MTB Tech Rumors and Innovation
6/1/2024 2:37am "It was concluded that no acute effects on nerve function in the dominant hand were measured after mountain bike cycling on the trail, despite high vibration doses through the handlebars." Am I missing something or does this imply there's nothing to worry about?
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/31/2024 5:08am I just measured the lever's bite point, did another bleed (lever horizontal with hayes pro bleed kit, zero bubbles) then put the used pads back in and the throw is identical, and matches the other brake that I didn't re-bleed. Seems like the throw is slightly reduced when fitting brand new pads, but as soon as they bed in properly...
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/28/2024 6:06am Thanks for this man. I'm using what I assume is the Hayes pro bleed kit (without the O-rings), and did a bit of testing for leaks while bleeding. The seal still isn't perfect, but only introduced bubbles at the connector when pulling a really strong vacuum (strong enough to actually pop the seal off the plunger inside the syringe). With...
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/27/2024 5:57pm I'm back to hate on my Hayes Dominions some more. Did a full caliper and lever bleed as per the manual, cleaned and lubed the pistons, fitted new pads and got them perfectly aligned. Right after bedding them in, the lever throw is roughly the same as my trail bike's Codes. After just 2 days at Dyfi the dead throw...
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/21/2024 11:27am I'm using Galfer Greens, wear fast for sure but performance is great.
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/20/2024 2:16pm I mean pulling until there's resistance at the lever. I've already tried all these suggestions too (lubricate the pistons, re-bleed, wind the contact all the way in then all the way out, wait for them to bed in, elastic band on the levers etc). No luck, front and back brake both feel identical, but both with massive throw. Otherwise the...
TheFBI Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
5/20/2024 11:59am Hi guys, long time lurker first time poster. Wondering if anyone can comment on the insanely long lever throw on Hayes Dominion brakes. Haven't seen it mentioned anywhere else but mine have about 50mm of dead stroke before finally biting after a day in the park. After resetting them they still have about 40mm of dead stroke. The bite point...