2024 Norco Sight C1 MX Bike

Vital Rating:
Related:
Where To Buy
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
$8,599.00
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
FIRST RIDE - 2024 Norco Optic and Sight
The vision of maximizing trail and all-mountain performance is more than just an optical illusion.
Rating:
Vital Review
NorcoSightOpticA

Norco's Optic created a lot of buzz for being a short-travel ripper with aggressive geometry when it last underwent a redesign in 2019. Meanwhile, the Norco Sight remained the silent workhorse in the mid-travel category focused on excellent all-mountain performance. For 2024, Norco has elevated the downhill performance of both bikes thanks to a new high-pivot suspension design. They maintain their respective on-trail handling while blurring the gap that separates the two bikes. The Optic now blends enduro-like geometry with short-travel trail performance, and the Sight packs enduro bike suspension performance into a more efficient, lightweight package. With more changes catered towards expanding the descending capabilities of each bike, has Norco maintained the trail and all-mountain ethos that make the Optic and Sight so exciting and versatile in their own way? Let's find out.  

Optic Highlights

Sight Highlights

  • Full carbon and aluminum frame options
  • 29-inch and mixed wheel options
  • 125mm (4.9 inches) of rear wheel travel // 140mm (5.5 inches) fork travel 
  • Virtual high-pivot suspension design
  • 65-degree claimed head tube angle, 64-degree measured, sticker on our test bike says 63 degrees.
  • Size-specific rear center and effective seat tube angles
  • Size-specific dropper posts
  • Guided internal cable routing on carbon frames
  • Threaded bottom bracket
  • Boost 148mm rear spacing w/ 12mm thru-axle 
  • Lifetime limited warranty 
  • Five size options 
  • UDH compatible
  • Measured weight (size 5, no pedals):  34.6 lbs (15.7 kg) 
  • MSRP: $6,999 - 9,099 USD (as tested, C2 MX Build - $6,999 USD)
  • Frame only: $2,099 - 3,849 USD
  • Full carbon and aluminum frame options
  • 29-inch and mixed wheel options
  • 150mm (5.9 inches) of rear wheel travel // 160mm (6.3 inches) of fork travel
  • Virtual high-pivot suspension design
  • 64-degree head tube angle
  • Size-specific rear center and effective seat tube angles
  • Size-specific dropper posts
  • Guided internal cable routing on carbon frames
  • Threaded bottom bracket
  • Boost 148mm rear spacing w/ 12mm thru-axle 
  • Lifetime limited warranty 
  • Five size options
  • UDH compatible
  • Measured weight (size 5, no pedals): 35.5 lbs (16.1 kg) 
  • MSRP: $3,999 - 7,499 USD (as tested, C1 MX Build - $7,499 USD) 
  • Frame only: $2,399 - 3,999 USD
 

Overview

With the Optic firmly in the trail bike category and the Sight encompassing a proper all-mountain bike, the engineering team at Norco looked to make the bikes more gravity-focused by improving rear suspension performance, creating more stable geometry, and building more adaptability into the frames.

Photo
Photo

 The ground-up suspension redesign aims to create the "best of both worlds" feel with better traction and more support out of the latest high-pivot variant of Norco's Virtual Pivot Suspension HP platform. Travel numbers remain the same: the Optic sticks with 125mm of rear wheel travel paired to a 140mm fork, while the Sight combines 150mm of rear wheel travel with a 160mm fork. Using their Virtual Pivot System in a high-pivot layout may be an anticipated move for a bike like a Sight, with mid-travel high-pivot bikes becoming more commonplace. But it's certainly a unique approach for a bike like the Optic with only 125mm travel.

Photo
Photo
...changing the rear wheel size does not change the geometry or suspension curve.

Frames previously were a mix of carbon and aluminum triangles but now models are either full carbon or aluminum. Following a natural progression from prior models, geometry is now slightly more aggressive. Front triangles have grown considerably to create more even pressure on both wheels and account for rear center growth. Interchangeable links and lower shock mounts allow for 27.5" or 29" rear wheels on both bikes, but more interestingly, changing the rear wheel size does not change the geometry or suspension curve. Norco underwent extensive prototyping to develop the frames and suspension platforms to ensure they would remain consistent regardless of rider preference. So, no matter the rear wheel size, a rider's body position on the bike and suspension characteristics will not be compromised. 

Suspension Design

The engineers at Norco have taken a radical, zero-compromise approach to their new Virtual Pivot System High Pivot suspension design. The main goal was to eliminate the need to pack shocks full of volume spacers to create adequate support. Both bikes can accommodate coil and air shocks thanks to revised kinematics with more progression. As for the axle path, both bikes utilize high main pivots to provide better square-edge bump absorption, plus idlers to mitigate chain growth. 

Photo

The less obvious benefits of the idlers are how they impact pedaling performance and increase mid-stroke support. The strategic placement and number of teeth on each idler allowed Norco to nearly eliminate anti-squat altogether, creating a "climb switch" feeling as a byproduct of chain tension. This approach means that each gear throughout the cassette provides different levels of anti-squat under load, with lower gear ratios providing more support than high ones. This allows descending performance to remain the top priority of the rear suspension, minimizing any unwanted influence from the bike's pedaling efficiency once pointed downhill. Without anti-squat, the bikes sit into their travel considerably easier with excellent small bump sensitivity. This is great for downhill performance but, in theory, might be a bit much for the wide range of uses these bikes are intended. 

Both bikes use trunnion-mounted shocks with eyelet-mounted bearings in the lower eyelets for the smoothest possible actuation throughout the shock travel.
Both bikes use trunnion-mounted shocks with eyelet-mounted bearings in the lower eyelets for the smoothest possible actuation throughout the shock travel.

The idlers are also positioned so that they keep a desirable amount of pedal kick. You might be asking yourself, doesn't that defeat the purpose of using an idler? Not exactly, but it does defeat the stuck-to-the-ground feeling associated with high-pivot bikes and keeps the Optic and Sight each from becoming a miniature Range.

Geometry

Both bikes have received evolved versions of their previous geometry packages. The Optic has gained a slacker headtube angle and considerable growth from head to toe to maximize high-speed stability. The Sight has remained more consistent, but numbers have grown overall. I tested a size '5' frame, or the equivalent of an XL. Here are the differences from the previous XL to the new size 5 frame:

Optic Sight
  • Head tube angle, 63 degrees (2 degrees slacker)
  • Seat tube angle, 77.5 degrees (1.5 degrees steeper)
  • Wheelbase, 1292mm, (17mm longer)
  • Stack, 644mm (6mm taller)
  • Seat tube length, 445mm (40mm shorter)
  • Same 64-degree head tube angle
  • Same 78-degree seat tube angle
  • Wheelbase, 1319mm (18mm longer)
  • Stack, 654mm (24mm taller)
  • Seat tube length, 445mm (20mm shorter)
Photo
2024 Optic Geometry
2024 Sight Geometry
2024 Sight Geometry

The rear center appears shorter compared to the previous models, but due to the rearward axle path, the new models grow under sag to create longer rear centers than before. Standover heights are also slightly lower, and seat tube lengths are considerably shorter to allow for longer dropper posts. As mentioned, the interchangeable links keep geometry consistent between wheel sizes, with the exception of a 5mm shorter wheelbase due to the smaller wheel out back.

63-degree Head Angle according to our bike's labeling
63-degree Head Angle according to our bike's labeling

Build Kits

Norco is notorious for having some pretty sweet build kits, with the upper-end builds spec'd with components most riders would choose in the first place. They generally opt for what aftermarket components are popular among consumers rather than offering the basic in-house spec from top to bottom. Components like DMR Deathgrip grips, OneUp travel-adjustable dropper posts, wheelsets with aftermarket hub options, and even color options on suspension all create a customized feel right out of the box. On the flip side, they've done their best to ensure high-level spec features like good suspension, tires, and shifting trickle down across all builds. Both bikes are available in carbon and aluminum at a few different price points in full 29 and MX options. For the U.S. market, the Optic is available only in carbon as a complete while the Sight is offered in both carbon and aluminum. Frame-only options are available in carbon or aluminum for both bikes in the U.S.

Norco -15 0

Sight C1 MX - $7,499

An example of their outstanding product spec is showcased in the C1 level Sight, which comes with a nice set of Stan's Flow S2 rims laced to RaceFace Vault hubs wrapped in Maxxis Minion DHF and DHR II tires. The cockpit features a Deity Racepoint bar with DMR Deathgrip grips and an in-house Norco stem to save a few bucks without impacting the ride quality. SRAM covers shifting and stopping power with a GX AXS Transmission drivetrain and Code Stealth Silver brakes with 200mm front and 180mm rear rotor. Suspension is handled by a FOX Factory 36 fork and DHX2 out back with a Sprindex coil, allowing riders to fine-tune spring weight without having to buy multiple coils. Lastly, a 240mm OneUp dropper is used across multiple sizes and is something I was happy to see as a taller rider. Riders needing less drop can easily adjust travel down as needed. Overall, it is an incredibly well-thought-out spec that leaves little to be desired. 

Strengths Weaknesses
  • Thoughtfully pieced together build with little to be desired
  • Provides custom/aftermarket feel right out of the box
  • While it is a trail bike, a 160mm FOX 36 may be susceptive to binding under larger riders.
  • Weight of GX drivetrain components

Sight C1 29 - $7,499
Sight C1 29 - $7,499
Sight C2 MX - $5,999
Sight C2 MX - $5,999
Sight C3 MX - $4,999
Sight C3 MX - $4,999
Sight A1 MX - $5,699
Sight A1 MX - $5,699
Sight A2 MX - $3,999
Sight A2 MX - $3,999
Sight C Frame Kit - $3,999
Sight C Frame Kit - $3,999
Sight C Frame Kit - $3,999
Sight C Frame Kit - $3,999
Sight A Frame Kit - $2,399
Sight A Frame Kit - $2,399
Sight A Frame Kit - $2,399
Sight A Frame Kit - $2,399

Optic C2 MX - $6,999

As for performance trickle-down, the C2-level Optic is a prime example of being more budget-friendly while eliminating the need to change much. Coming it at around $2,200 less than the C1 level Optic, the same Maxxis Minion DHRII and DHF combo are used, as is the SRAM GX AXS Transmission. Brakes bump down to SRAM Bronze level Code Stealth, which loses the pad contact adjustment from the Silver level but is still paired with 200/180mm rotors. RockShox Select+ level suspension is found front and rear in the form of a 140mm Lyrik, which only loses the Buttercup technology from the Ultimate, and a 185x50mm Vivid, which still features Hydraulic Bottom Out control. A 200mm TransX travel-adjustable dropper is used across most sizes, along with Norco's house-branded bar and stems to help bring the retail price down. While it may not be dream-build-worthy, the Optic C2 certainly features performance in all the right places. 

Photo
Strengths Weaknesses
  • Descending performance at the forefront of the components in the form of burlier suspension
  • Hits a price point that allows freedom for customization later
  • Short seat tube meant the dropper had to go past minimum insertion line to achieve the desired saddle height
  • A bit heavy for a 125mm bike
Optic C1 29
Optic C1 29 - $9,099
Optic C2 29
Optic C2 29 - $6,999
Optic C2 MX
Optic C2 MX - $6,999
Optic C Frame Kit
Optic C Frame Kit - $3,849
Optic C Frame Kit
Optic C Frame Kit - $3,849
Optic A Frame Kit
Optic A Frame Kit - $2,099
Optic A Frame Kit
Optic A Frame Kit - $2,099

Ride Aligned Setup

Norco has one of the best bike setup guides available with their Ride Aligned System, and with this new run of bikes comes a new generation of Ride Aligned. Accessed through their website or via their app, the system makes setup intuitive and comprehensive for adjusting spring rates and damper settings. The updated version allows riders to select things like a more forward or rearward weight bias on the bike, select what level of traction their trails offer, or specify whether the terrain is more technical or flowy. The ability to save setup profiles for different locations is super handy when looking at the long-term use of either bike and can quickly get riders back to a comfortable setup when riding multiple terrain types. 

Photo
Photo

But this is not just an update to what preferences riders can set and an improvement in convenience. The data supporting the suggested setups is also far more accurate than before, thanks to an in-house suspension dyno Norco has acquired since the last generation of Ride Aligned was introduced. Where they previously matched real-world data with manufacturers' setup guides to provide suggested settings, the dyno revealed bigger changes between clicks than what they had previously believed. Having used the prior Ride Aligned guide for suspension setup, the new version had fewer discrepancies from what I prefer and even provided some new settings that improved my riding experience. 

Photo

I was pretty happy with the setup of both bikes as they arrived and only had to make small adjustments to feel comfortable. On the Optic, I felt slightly too far over the front of the bike and swapped to a taller stack height and taller 38mm rise Deity Blacklabel handlebar. The only major component issue I ran into was the 200mm dropper post needing to be set above the minimum insertion line for my preferred saddle height due to the short seat tube length. I did swap to a 29" rear wheel on both bikes because I struggled to maintain rear-wheel traction with the mixed setup. The rear wheel would build traction and then suddenly unload, making it tough to experience the full capabilities of the bikes. 

Photo

On The Trail

While the anticipated benefit of my feet feeling glued to the pedals was present on both bikes, the glued-to-the-ground feeling associated with other high-pivot bikes was not. The idler does a great job eliminating most of the pedal kickback, and the amount tuned into the bikes is hardly noticeable across chatter aside from the support that builds while pumping and jumping. That being said, both bikes track over bumps incredibly well and absolutely corner on rails from ample rear wheel traction and well-balanced geometry. 

The Optic is like the Fluid's older sibling who lifts weights for fun.
Photo
With so much traction on hand, trail-side tire removal is easy.
Photo
Photo

Optic

With the outgoing Optic essentially becoming the recently launched Fluid, where does the new Optic fit into Norco's lineup? The Optic is like the Fluid's older sibling who lifts weights for fun. On the trail, it feels lightweight and efficient, making popping off of side hits a common occurrence as it generates speed easily and rewards rider input. Norco did a great job increasing the capability of the Optic without losing track of its intended use. 

Descending Performance: The Optic excels at holding it wide open across mellower terrain but is just as comfortable tackling aggressive descents, with balanced traction on both wheels. It just requires a more thoughtful approach to technical terrain and delivers a more lively ride than a bike with more travel. Considering its travel amount, the square-edge bump performance was rather impressive, but there is a good amount of feedback through the pedals. This feedback isn't as much of a drawback when considering it is part of how Norco has preserved the qualities that make a short-travel trail bike fun to ride. The Optic punches well above its weight class while maintaining the ability to jump and skip over sections that would otherwise result in a violent bottom-out experience. 

Pedaling Performance: The seated pedaling position is nice and upright, allowing for a range of cadence with relatively minimal effort. Power transfer from the pedals feels direct, with a slight loss of energy at a higher cadence from the idler. The Optic gets up and goes under hard acceleration when sprinting and easily gains speed. The benefits of the idler are less apparent on the Optic because it already does a great job of maximizing pedal efficiency. 

Strengths Weaknesses
  • Snappy handling that rewards rider input.
  • Keeps a wider variety of terrain more interesting.
  • Delayed handling from slack headtube.
  • Difficult to point through tight turns at lower speeds.
Photo

Sight

Where the Optic started to reach its limit in the rough stuff, the Sight was just getting started. The downhill performance is a standout characteristic, but a supportive suspension platform helps create a light feeling on the trail that makes tackling the gnarliest terrain feel easy. Having ridden the Range, the Sight will have you questioning why you would ever need more travel outside of a downhill race track. 

Where the Optic managed to soften square edge hits, the Sight seemed to delete them altogether.

Descending Performance: The suspension is super light off the top but has a consistent ramp-up to keep from blowing through the travel. Where the Optic managed to soften square edge hits, the Sight seemed to delete them altogether, and traction was ample. This meant pumping and jumping required larger undulations to be beneficial, but the ability to hold and generate momentum remained consistent. It is not the most energetic, light-footed bike I have ridden. It's a bigger bike and rides that way on the trail. The axle path is slightly more rearward than the Optic, and the longer travel really helps drive the bike forward across the roughest terrain.

Pedaling Performance: The pedaling position of the Sight is also fairly upright, and my body position felt slightly forward from center. The highly active rear suspension benefited uphill performance by creating a surprisingly efficient pedaling bike that helped maintain a consistent cadence across undulations of all sizes. While a fair amount of pedal bob is present in higher gears, the anti-squat characteristics from the idler pulley eliminate any drawbacks in lower gears. 

Strengths

Weaknesses

  • Bump deleting suspension performance  
  • Great traction at both wheels that thrives on high-speed
  • Difficulty navigating tighter, more technical terrain
  • Fork travel could go up 10mm
Photo

What's The Bottom Line?

Norco has done a great job elevating the baseline capabilities of the Sight and Optic through their no-compromise approach to suspension, progression in geometry, and simplifying suspension setup. They have successfully grown the intended use of both bikes without detracting from what makes them great trail and all-mountain bikes. With such dialed-build kit options at various price points, the biggest decision is choosing which bike best meets your needs. The Optic is a great bike for keeping mellower terrain fun and feeling limitless on ripping singletrack. The bike rewards rider input and generates speed with ease through turns and undulations while holding its own in the rough stuff. The Sight is nearly the opposite; it thrives in the rough and eggs you on to brake a little later into every corner. It builds speed a little slower but can hold momentum incredibly well, which made me feel like I could push into the gnarliest terrain. The response was an effortless ride experience so long as the bike's dimensions weren't holding it back. The Optic required more input and intention with line choice, but the result was very rewarding. I think with a bit more time, I can get the Optic set up a little more closely to the Sight, and it should creep nearer to a best-of-both-worlds experience. If I was choosing to keep only one bike in my garage, it would be the Sight for its consistent feeling across a variety of terrain. Because I own a bike with more travel, I'll be holding on to the Optic to see what kind of performance can be unlocked out of the short-travel package. Stay tuned for a long-term review of the Optic, where we will compare it to another high-pivot short-travel bike later this year. 

For more information, please visit norco.com


View key specs and compare 2024 Norco bikes side by side in the Product section.

Select 2024 Norco bikes are available now at Jenson USA.


About The Tester

Jonathon Simonetti - Age: 30 // Years Riding MTB: 21 // Height: 6’4” (1.93m) // Weight: 230-pounds (97.5kg)

Jonny started mountain biking in 2003 after a trip to Northstar showed him how much more could be ridden on 26” wheels than on a BMX bike. He began racing downhill in 2004 and raced for 12 years until ultimately deciding having fun on a bike was more important than race results. After working as a mechanic in the industry for a few years and developing a deeper understanding of bikes inside and out, he has an aptitude for pairing his riding ability with the analysis of bikes and breaking down what makes them work well. He spends most of his time between trail rides and skatepark sessions, with occasional days on the downhill bike.

25 comments

Post a reply to: FIRST RIDE - 2024 Norco Optic and Sight

In reply to by innonyme

In reply to by kperras

In reply to by ZAKBROWN!

In reply to by matmattmatthew

In reply to by Alexptdmg

Specifications

Product
Norco Sight C1 MX Bike
Model Year
2024
Riding Type
Enduro / All-Mountain
Rider
Unisex
Sizes and Geometry
1
2
3
4
5
Wheel Size
27.5" (650b)
29"
Other: Mullet
Frame Material
Carbon Fiber
Frame Material Details
Carbon front and rear triangles; co-molded shuttle guard, lower down tube, seatstay, and chainstay protection
Rear Travel
150mm
Rear Shock
FOX DHX2 Factory, Sprindex coil spring, 2-position compression lever, high/low-speed compression adjust, high/low-speed rebound adjust, trunnion mount, 205mm length x 60mm stroke
Fork
FOX FLOAT 36 Factory, GRIP2 damper, high/low-speed compression adjust, low-speed rebound adjust, Kashima coating, 44mm offset, includes FOX mudguard/fender
Fork Travel
160mm
Head Tube Diameter
Tapered, 1.125" top, 1.5" bottom
Headset
FSA No.57E, sealed bearings
Handlebar
DEITY Ridgeline, 800mm width, 25mm rise, 35mm clamp diameter
Stem
CNC alloy, 40mm length, 35mm bar clamp
Grips
DMR DeathGrip
Brakes
SRAM Code Silver, 4-piston, sintered pads, SRAM CenterLine 6-bolt rotors (200mm front, 180mm rear)
Brake Levers
SRAM Code Silver Stealth, tool-free Reach Adjust and Contact Point Adjust
Drivetrain
1x
Shifters
SRAM Eagle Pod Ultimate Controller, 12-speed, AXS electronic wireless
Front Derailleur
None
Rear Derailleur
SRAM GX Eagle Transmission, 12-speed, AXS electronic wireless
ISCG Tabs
ISCG05 lower two tabs
Chainguide
Norco integrated upper idler guide and lower guide/bashguard
Cranks
SRAM GX Eagle Transmission Alloy DUB, 170mm length
Chainrings
SRAM GX Eagle Transmission, 32 tooth
Bottom Bracket
SRAM DUB, English/BSA threaded
Pedals
None
Chain
SRAM GX Eagle Transmission, 12-speed
Cassette
SRAM GX Eagle Transmission XS-1275, 12-speed, 10-52 tooth
Rims
Stan’s NoTubes Flow S2, 32 hole
Hubs
Race Face Vault, 15mm x 110mm (Boost) front, 12mm x 148mm (Boost) rear with XD driver
Spokes
Sapim Race, butted stainless steel
Tires
Front: Maxxis Minion DHF, 3C MaxxTerra compound, EXO+ casing, TR, folding, 29" x 2.5” WT
Rear: Maxxis Minion DHR II, 3C MaxxTerra compound, EXO+ casing, TR, folding, 27.5" x 2.4” WT
Saddle
SDG Bel-Air V3
Seatpost
OneUp adjustable dropper
Drop: 150mm (size 1), 180mm (size 2), 210mm (sizes 3/4), 240mm (size 5)
Seatpost Diameter
34.9mm
Seatpost Clamp
Norco alloy, single bolt
Rear Dropout / Hub Dimensions
12mm x 148mm (Boost)
Max. Tire Size
2.6"
Bottle Cage Mounts
One inside front triangle plus accessory mounts under top tube
Colors
White/Yellow
Warranty
Lifetime frame; 2 years suspension hardware; 1 year Norco components, finish, and graphics
Weight
Size 3: 35 lb 0.9 oz (15,900 g)
Size 5: 35 lb 7.9 oz (16,100 g)
Miscellaneous
• VPS-HP (Virtual Pivot Suspension - High Pivot) rear suspension design
• Mixed ("Mullet") wheels: 29" front, 27.5" rear
• Norco Ride Aligned Design System
• Includes app-based Ride Aligned Setup Guide with rider-specific suspension, cockpit, and tire pressure suggestions
• Internal cable routing with internal guide tubes
• SRAM UDH (Universal Derailleur Hanger)
• Compatible with 29" rear wheel via Missing Link Kit
• Frame weight: 3.2 kg (6.9 lbs)
• Canadian price: 9999 CAD
Price
$7,499.00
More Info
What do you think?
Where To Buy
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
$8,599.00
Free shipping on orders over $50 (continental U.S. only).
International shipping available. Some exclusions apply.
Bikes

More Products

The Latest