All

and i believe Intend, i rode the 20mm on the Podium, 2.75kg fork, and my new Intend edge with a 15mm axle, none feel flexy at all under any circumstance, if something, the edge feels stiffer and smoother under braking and corners, while being 2.25kg, half a kg lighter or a pound in freedom unit

I ve got a hope front hub with the 2 different adaptators for 20*110 and 15*110 , you just have to take off the circlips , put the other adaptators and put on the circlips again. Cornelius ( from Intend) tell me that there is no significant rigidity difference beween the two axle

Back at it again with my horrendous image measurements, this time something actually bicycle related. I took the shock eye to eye of 225mm and zoomed in super close to align it to the centre of the shock bolts and scaled the image until the measurement was exactly 225. I drew a line to the middle of the shimano crank spindle and the middle of the rear thru-axle (also zoomed in until my eyes were bleeding to estimate the centre as best as possible). I then measured the horizontal distance between the two points (used construction lines to make this...