Accessibility Widget: On | Off

'04 Turner DHR restoration for Hafjell Cup Retro racing 8

'04 Turner DHR restoration for Hafjell Cup Retro racing
'04 Turner DHR restoration for Hafjell Cup Retro racing '04 Turner DHR before restoration '04 Turner DHR after restoration. '04 Turner DHR before restoration Works Components 2.0 Degree ZS49-ZS49 Angle Headset - To Suit 1 1/8" Steerer Tube ready for installation First pickup '04 Turner DHR after restoration.
Notice lower BB and slacker HA.
Create New Tag
Parts Brand Model Additional info
Frame Turner DHR 2004 model, bored out rear for lower BB and slacker HA
Rear Shock Avalanche Montie
Fork Marzocchi 888 RC
Headset Works Components 2.0 Degree 2.0 Degree ZS49-ZS49 Angle Headset - To Suit 1 1/8" Steerer Tube at -2 degrees
Handlebar Tioga Crowbar Was bought with Azonic Double Wall 750mm, but changed to Tioga bar to conform to max width regulation of 680mm.
Stem Marzocchi Direct Mount
Grips ODI Yeti Lock-On
Brakes Hope Technology Mono M4
Brake Levers Hope Technology M4
Shifters Shimano
Rear Derailleur Shimano Tiagra Short Cage
Chainguide FSA Chain Pimp
Cranks Middleburn RS7 Crankset
Bottom Bracket FSA
Chain Shimano
Cassette / Rear Cog Shimano
Pedals Azonic A Frame
Front Rim Mavic 316 Disc
Rear Rim Mavic Ex 729 Disc Rim
Spokes DT Swiss
Front Tire Maxxis Maxxis Minion DHF From 2008, might change them if they fall apart after racing
Rear Tire Maxxis Maxxis Minion DHF From 2008, might change them if they fall apart after racing
Saddle Selle Italia
Seatpost Thomson
Seatpost Clamp Thomson
General Info
Model Year 2004
Riding Type Downhill
Additional Info Restoration for use at Hafjell Bikepark Cup in the Retro Class: Max 680mm bar width, max 26" wheels, nothing newer than 2008 model. -Refreshened decals and clean. Covered with clear vinyl. -Fork Service -Wheel service, straightening, tensioning nad hub service. -XTR short cage deraiileur is coming on -Fixed broken chain device -Changed frame needle bearings -Fixed seat/post -Changed handlebar -Lowered BB and slackened HA by boring out rear frame mount and moving it 7mm -Changing headset to slacken HA (and it needed change anyways) -New gear wire -Bled brakes (pads are fine) -Tires are from 2008, so might get changed if they fall apart -Rear shock doesn't feel like it needs service, but service kit is ordered and awaiting delivery from Avalanche Original HA: 66 degrees HA after mods: 63 degrees BB dropped around 1 cm from original
8 comments
Show More Comment(s) / Leave a Comment