Rocky Mountain Slayer 790 MSL - Custom 10

968 of 9511

Vital MTB member dirtworks911
14755 dirtworks911,14755/all 04/09/12 8 4,14755/setup 1 2 46 108
Create New Tag
Parts Brand Model Additional info
Frame Rocky Mountain Slayer 790 MSL Large
Rear Shock Fox Racing Shox Float X2 Factory 2-Position Lever
Fork Fox Racing Shox Float 36 RC2 170
Headset Hope
Handlebar Race Face Sixc 35 20mm Rise Carbon 800mm width
Stem Chromag BZA 35 Ti Bolts
Grips ------- Chromag Squarewave XL
Brakes Hope Tech 3 V4
Brake Levers Hope Tech 3 V4 Ti Bolts
Shifters SRAM XO1 Eagle Hope Shifter Attachment
Front Derailleur -------
Rear Derailleur SRAM XO1 Eagle
Chainguide e*thirteen TRS Plus
Cranks Race Face SixC Carbon 170mm Length
Chainrings / Sprocket Race Face Cinch DM 34 tooth
Bottom Bracket Race Face Cinch BB92
Chain SRAM XX1 Eagle Black
Cassette / Rear Cog SRAM XO1 Eagle
Pedals Canfield Brothers Crampon Ultimate
Front Rim Spank Spike Race 33
Rear Rim Spank Spike Race 33
Hubs Project 321 G2 Boost 32 hole | Loud pawls | 216 p.o.e
Spokes Sapim Race
Front Tire Bontrager SE5 2.4"
Rear Tire Bontrager SE5 2.4"
Saddle Bontrager Evoke RXL Carbon Rails
Seatpost RockShox Reverb Stealth B1 Dropper Post 170mm
Seatpost Clamp ------- Rocky Mountain
General Info
Model Year 2017
Riding Type Trail / All-Mountain
Weight 29 lb 10 oz (13438 g)
  • michaela

    5/31/2017 3:51 PM

    V neat. I have the same suspension, what sort of tune do you run? Do you have any trouble with too much sag on the rear shock?

  • dirtworks911

    8/30/2017 9:34 PM

    Not that I've noticed. What I found weird is that the shock bottoms out with over a cm of shock body left. Above the "Kashima" label never actually is viable stroke.

  • freeride99

    5/19/2017 8:02 PM

    What are you using on the frame as far as protection from chips and scratches

  • dirtworks911

    5/31/2017 2:06 PM

    3M tape and a custom molded polycarbonate downtube protector (not pictured.) Something like the LIZARD SKINS LARGE FRAME PROTECTOR - CARBON LEATHER is a must.

  • Bertleman

    4/28/2017 11:44 AM

    I saw a few Slayers at Highland park on opening day Thurs

  • The Greek

    4/25/2017 11:30 AM

    my next bike, awesome build here mate!

  • dklemm

    4/25/2017 9:46 AM

    This is some incredible color matching and coordination with a baller build to boot. Awesome job. How do you like the angle of the shifter with the direct mount attachment?

  • dirtworks911

    4/25/2017 8:01 PM

    Honestly, the angle is horrible but it cleans up the bars a bit so it's worth it for now. I have a sram bar clamp I may throw on later but for now it's something I put up with.

  • iceman2058

    4/25/2017 4:50 AM

    Bike of the Day April 25, 2017!

  • vogankhadafi

    4/24/2017 7:17 AM

    I'll take the hammer

Show More Comment(s) / Leave a Comment