Parts
Brand
Model
Additional info
Parts
Frame
Other
Cachet Bicycle Co. Modified Custom Pump Track Racer
Frame:
Other Cachet Bicycle Co. Modified Custom Pump Track Racer
Grips
ESI
Racers Edge
thinnest model, super light , crazy sticky , and amazing ability to absorb trail vibration compared to rubber grips.
Grips:
ESI Racers Edge.
Misc: thinnest model, super light , crazy sticky , and amazing ability to absorb trail vibration compared to rubber grips.
Cranks
Race Face
SixC Carbon 165mm
Carbon DH crank
Cranks:
Race Face SixC Carbon 165mm.
Misc: Carbon DH crank
Bottom Bracket
Race Face
Cinch BSA 30
73mm threaded BB , 30mm aluminuim axle,
Bottom Bracket:
Race Face Cinch BSA 30.
Misc: 73mm threaded BB , 30mm aluminuim axle,
Pedals
HT Components
mag body, titanium axle, aluminium pins.
Pedals:
HT Components .
Misc: mag body, titanium axle, aluminium pins.
Front Tire
Kenda
Small Block 8
26" X 1.75", shaved center knobs for less weight and rolling resistance.
Front Tire:
Kenda Small Block 8.
Misc: 26" X 1.75", shaved center knobs for less weight and rolling resistance.
Rear Tire
Kenda
Small Block 8
26" X 1.75" , shaved center knobs
Rear Tire:
Kenda Small Block 8.
Misc: 26" X 1.75" , shaved center knobs
General Info
General Info
Model Year
2022
Model Year:
2022
Weight
15 lb 0 oz (6,804 g)
Weight: 15 lb 0 oz (6,804 g)
Additional Info
Additional Info
i took my favorite frame i currently had here that i loved on the pumptrack ( won a silver and a gold medal in the crankworx series in 2020) and decided to change the stuff on it that i could to make it even faster!!
First I started with a basic used Cachet ZOO dj frame i had sitting, i sanded the paint off and chopped the drop outs down to much shorter length and also dropped the BB height at the same time, this also saved a lot of weight.
next thing i wanted to do was run the brake hose internally from tip to tail, i drill the chainstay , drilled head tube and routered a space between the axle and BB shell for the hose to be routed cleanly through the BB shells inside.
rear hub has no freehub body saving lots of weight and bearing resistance.
radial laced front wheel to save weight and allow for the rider to put every bit of power down.
First I started with a basic used Cachet ZOO dj frame i had sitting, i sanded the paint off and chopped the drop outs down to much shorter length and also dropped the BB height at the same time, this also saved a lot of weight.
next thing i wanted to do was run the brake hose internally from tip to tail, i drill the chainstay , drilled head tube and routered a space between the axle and BB shell for the hose to be routed cleanly through the BB shells inside.
rear hub has no freehub body saving lots of weight and bearing resistance.
radial laced front wheel to save weight and allow for the rider to put every bit of power down.
Additional Info:i took my favorite frame i currently had here that i loved on the pumptrack ( won a silver and a gold medal in the crankworx series in 2020) and decided to change the stuff on it that i could to make it even faster!!
First I started with a basic used Cachet ZOO dj frame i had sitting, i sanded the paint off and chopped the drop outs down to much shorter length and also dropped the BB height at the same time, this also saved a lot of weight.
next thing i wanted to do was run the brake hose internally from tip to tail, i drill the chainstay , drilled head tube and routered a space between the axle and BB shell for the hose to be routed cleanly through the BB shells inside.
rear hub has no freehub body saving lots of weight and bearing resistance.
radial laced front wheel to save weight and allow for the rider to put every bit of power down.
First I started with a basic used Cachet ZOO dj frame i had sitting, i sanded the paint off and chopped the drop outs down to much shorter length and also dropped the BB height at the same time, this also saved a lot of weight.
next thing i wanted to do was run the brake hose internally from tip to tail, i drill the chainstay , drilled head tube and routered a space between the axle and BB shell for the hose to be routed cleanly through the BB shells inside.
rear hub has no freehub body saving lots of weight and bearing resistance.
radial laced front wheel to save weight and allow for the rider to put every bit of power down.
12/21/2022 10:17am
