
1749 of 13867
Parts | Brand | Model | Additional info |
Frame | Banshee | Titan | L |
---|---|---|---|
Rear Shock | DVO | JadeX | |
Fork | DVO | Onyx | 180mm in pics |
Handlebar | Renthal | Fatbar V2 | 800mm |
Stem | Truvativ | Holzfeller | 50mm |
Grips | SDG | ||
Brakes | Hayes | Dominion A4 | 200mm Rotors |
Shifters | Shimano | XT M8100 | |
Rear Derailleur | Shimano | SLX M7100 | |
Chainguide | OneUp Components | ||
Cranks | Shimano | SLX M7100 | |
Chainrings / Sprocket | Shimano | SLX M7100 | 32t |
Bottom Bracket | Shimano | ||
Chain | Shimano | SLX M7100 | |
Cassette / Rear Cog | Shimano | SLX M7100 | 11-51 |
Pedals | Crankbrothers | ||
Front Rim | Other | RideFast | MAINLINE |
Rear Rim | Other | RideFast | MAINLINE |
Hubs | Other | RideFast | |
Saddle | SDG | ||
Seatpost | SDG | Tellis | 170mm |
General Info | ||
Model Year | 2020 | |
---|---|---|
Riding Type | Trail / All-Mountain | |
Weight | 35 lb 0 oz (15876 g) |
Nobrain
1/11/2021 5:08 AM
these incompatibility are mentionned on Banshee website specification sheet .
I know as well that the fast fenix ( french shock manufacturer) is not compatible either
plumpssack
4/10/2020 10:22 AM
@abeck are you sure the piggy back of the shock doesnt collide with the downtube before using full travel? I dented my Topaz 2 piggy back bunny hopping in the parking lot on my Titan after I finished my build...
You should check that out by compressing the shock with the spring removed.
abeck
4/10/2020 12:33 PM
plumpssack
4/10/2020 12:44 PM
abeck
4/10/2020 3:32 PM
tunasub
4/10/2020 7:50 PM
mhon44
4/10/2020 11:43 PM
plumpssack
4/11/2020 12:29 AM
Same as with the Topaz 2 unfortunately. Bottoms out at around 135mm Travel or something around that. You have a good 10-15mm shock stroke left.
I could pretty easily get it that deep into its travel..
IBC
4/11/2020 6:47 PM
abeck
4/11/2020 8:14 PM
chyu
4/12/2020 5:11 AM
luisgutrod
7/3/2020 10:52 PM
iceman2058
4/10/2020 1:04 AM