Santa Cruz Nomad 2 with custom linkage to fit new standard shock 2
Parts
General Info
Update 2023/07/07
Replace lower headset from EC49 to ZS49 for tapered steer
low down the center of gravity , BB height now 347mm
head tube angle now 65 degrees to improve performance when descending and cornering
rear shock replace back to Triair 3CR gen 1
modify the fork seal of both damper and EQ shaft
-------------------------------------------------------------------------------------
The custom linkage V2 stay as original geometry
linkage V3 lower bottom bracket height 6mm from original height 355mm
both decrease pedal bob compare with original linkage with 216/63 shock
Update 2023/07/07
Replace lower headset from EC49 to ZS49 for tapered steer
low down the center of gravity , BB height now 347mm
head tube angle now 65 degrees to improve performance when descending and cornering
rear shock replace back to Triair 3CR gen 1
modify the fork seal of both damper and EQ shaft
-------------------------------------------------------------------------------------
The custom linkage V2 stay as original geometry
linkage V3 lower bottom bracket height 6mm from original height 355mm
both decrease pedal bob compare with original linkage with 216/63 shock
View replies to: Santa Cruz Nomad 2 with custom linkage to fit new standard shock
Comments