2026 MTB Tech Rumors and Innovation - Longer and Slacker

Related:
jones007
Posts
139
Joined
12/9/2025
Location
SEASIDE, CA, USA
3 hours ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

1 hour ago
Suns_PSD wrote:
Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the...

Any 32" wheel of the same tech is going to have a larger moment of inertia. In fact, even if they got the weight exactly the same, there would still be more moment of inertia just because the weight of the rim/ tire is further from the fulcrum.

Do you remember when you and your buddies were spinning each other on your old man's bar stool, and you figured out that when you pulled your legs in, you sped way up, that's a reduction in moment of inertia but no change in overall weight.

If you've ever put larger wheels on a vehicle, even with the same OD tire, you can clearly feel the reduced brake effectiveness.

The way I see it, 32" wheels will require some upgrade in brake performance if the goal is to maintain the exact same stopping power.

jones007 wrote:
I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is...

I haven't run the numbers, but I suspect that even if you're running DH tires on heavy 32" rims, the angular inertia in the wheels is still minor compared to the linear inertia of rider+bike (maybe not for a small kid on a heavy ebike).

The total increase in energy that is required to be dissipated from 32" vs 29" wheels is less than 1% of total system energy in the bike and rider. 

image 866
5
sollie
Posts
28
Joined
5/7/2025
Location
Longmont, CO, USA
44 minutes ago

So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so your brakes have the same leverage ratio on the wheel, you'll have a very similar braking experience compared to a 29er? But perhaps easier, since you'll have a longer contact patch on the 32"? 

28 minutes ago Edited Date/Time 14 minutes ago
sollie wrote:
So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so...

So is it fair to say that if you're basically stopping the same amount of energy, and if you up your rotor size by 20mm so your brakes have the same leverage ratio on the wheel, you'll have a very similar braking experience compared to a 29er? But perhaps easier, since you'll have a longer contact patch on the 32"? 

I think that is a fair assessment, although another variable to consider is heat. While a larger rotor is beneficial to react to the ~10% increased leverage ratio for absolute stopping force, the heat that needs to be dissipated is only 1% higher, so the brakes may run slightly cooler than the original 29er, smaller rotor setup. This may be counteracted by the decreased rolling resistance and decreased cornering ability of bigger wheels, so the rider may need to brake more anyway, leading to more heat in the rotors. 

All that is to say, when we're talking about differences this small, there are too many variables to meaningfully come away with any conclusion from these theoretical thought experiments. Just go ride a bike and have fun. Choose a rotor size and be a dick about it. 

1
sollie
Posts
28
Joined
5/7/2025
Location
Longmont, CO, USA
17 minutes ago

Anecdotally, I did a continuous 3000ft decent on my 32" gravel bike with 180mm rotors and they definitely got too hot... glazed the rear pads. That's with a ~260lb system weight. I was still stopping fine though, and was able to lock up the wheels whenever I wanted with Sram gravel brakes. For an XC/downcountry MTB I'd probably want 200 rear, and 200 or 220 front, which is what I run on my Enduro 29er. So I'd say the +20mm rotor rule of thumb is reasonable. 

1
hairyyy
Posts
58
Joined
12/10/2018
Location
AD
7 minutes ago

Tech rumours. 

Tech. 

Rumors. 

 

2
1 minute ago

It doesn't feel like a big stretch in terms of the thread's intentions to also discuss the ancillary implications of those tech rumors. 

 

Post a reply to: 2026 MTB Tech Rumors and Innovation - Longer and Slacker

The Latest