Yeti DJ loads of custom parts 6

1984 of 9406

Vital MTB member Hollen
19425 Hollen,19425/all 10/31/12 1 1,19425/setup 7
One of single speed rear hub 12X142 and one of post mount 140mm single speed dropout One off post mount 140mm single speed dropout. The Ti tread inserts have been drilled out on both sides to save weight. One off post mount 140mm single speed dropout One off post mount 140mm single speed dropout One off straight pull single speed rear hub 12X142 DT Swiss 240S inners One off brakeless 20mm straight pull front hub DT Swiss 440 inners One off brakeless 20mm straight pull front hub DT Swiss 440 inners One off 28T N/W directmount chainring finnished okt 19th 2012 so maybe the first directmount N/W. One off super short stem 30.25mm
Create New Tag
Parts Brand Model Additional info
Frame Yeti DJ w. One off aw7075 SS 12x142 dropout
Fork Fox Racing Shox 36 RLC Brake mounts shaved, serviced, shimmed to DJ and resprayed
Headset Chris King Inset Black
Handlebar Race Face SIXC Carbon Handlebar Black
Stem Other One off aw7075 Super short 30.25mm
Grips Sensus Swayze Lock-On Black
Brakes Formula R1 Steel braided brakelines
Cranks SRAM X-0 DH 165mm
Chainrings / Sprocket Other One off 28T aw7075 N/W Black
Bottom Bracket SRAM GXP
Chain KMC X10 SL DLC black
Cassette / Rear Cog Gusset 12T
Pedals Other Chromag Scarab Black
Front Rim Other T-bolt carbon DH 32H
Rear Rim Other T-bolt carbon DH 32H
Hubs Other One off 32h straight pull aw7075 Rear single speed front brakeless
Spokes Sapim SuperSpoke
Front Tire Schwalbe Tabletop
Rear Tire Schwalbe Tabletop
Saddle Chromag Brandon Semenuks' 'Overture' Signature Model
Seatpost Thomson Elite Very short
Seatpost Clamp Other Salsa
General Info
Model Year 2011
Riding Type Dirt Jump/Urban
Weight 23 lb 9.4 oz (10700 g)
Additional Info Understated and strong build. Parts chosen for strenght not weight. All one of parts designed and cut from billet aw7075 alluminium by me. Started with the chainring. Then dropouts because I could never understand why framebuilders didn't go for postmount. Then came the stem, cause I knew i could do it. Last DIY projekt was the hubs. started with a brakeless straight pull front hub, because straight pull is stronger and cooler and brakeless because never seen a DJ with front brakes. Rear hub was a bit more of a chalange, But found out wich hub i wanted to build it on. And it had to be straight pull to match the front and single speed again never seen a DJ whith gears. Took forever.....
  • flickwg

    11/30/2014 6:29 AM

    That is insane, such impressive craftsmanship. Think you could do a geared 142x12 for a DT Swiss RWS with increased hanger offset (outwards) and make it work with a Hope SS hub? That would be my dream setup

  • Hollen

    12/1/2014 6:02 AM

    Thanks. I have moved on to a new project so there probably won't be any more updates.
    But what do you mean with increased hanger offset? And whats is the point with a hanger with an SS hub? Asuming ss is short for single speed....

  • flickwg

    12/1/2014 2:37 PM

    I run it with a single speed hub so it only has 6 gears, just using 2/3 of a cassette, stronger wheel as it is evenly dished, just the gear cable bolt gets close to the spokes so if it was built a bit offset would add a bit of a safety buffer in there. Did you just model the original dropout and then redesign it? What's your next project?

  • Hollen

    12/3/2014 9:51 AM

    Cool gear setup. Is there room to shorten the bolt a bit. Maybe a socket screw would solve your problem.
    I'm thinking offsetting the deralier wouldn't fix it. Because the cassette will still be the same place.
    I'm building a balance bike for my 2yo son. building a frame and som kickass wheels. Stock hubs this time thou.

  • osborne1031

    8/9/2014 6:02 PM

    This thing leaves me speechless man. Such a good looking bike.

  • Hollen

    8/10/2014 7:50 AM

    Thanks. Many many many hours of work went into it.

Show More Comment(s) / Leave a Comment