Silent Bikes - What tricks do you have to keep your bike quiet through the season?

AndehM
Posts
805
Joined
5/7/2018
Location
El Granada, CA, USA
Fantasy
7/20/2026 6:57am

Just a followup to a few things from earlier.  I tried an MRP SXg bash guide - the lower guide makes more noise than it solves.  I could hear the chain hitting it, and the little bit of rubber it has lining it isn't enough to silence.  Plus running an OChain, I had to run both the upper and lower guides fairly far away to clear the OChain.  I also tried the STFU finned tape, but the adhesive won't stick to my Santa Cruz chainstay protector.  I wanted to use the STFU tape to supplement the stock protector, and the double sided tape just won't stick.  I also tried double sided Gorilla tape which I've had good luck with in the past but that also peeled right up.

Either way, it's pretty damn quiet now that I figured out the mastic tape on crank arm thing.

5 hours ago

Previously I thought the T Type clutches really sucked because of all my chain noise but I have now realized my bike sounds like a shopping cart because the side of the chain hits the cog beside it and jingles and reverberates like mad. The chain has virtually no clearance, which I assume is standard. When you lightly tap the chain or the cassette with your finger, its like your playing the triangle. Landing two degrees sideways makes it sound like a shit.


 What options are there for this? Hot waxing your chain to give some damping? Belt conversion kit? 

X0 derailleur and chain, GX cassette. Two upper, 1 lower STFU damper, O chain. It's all there and doesn't help at all.

1
Jakub_G
Posts
387
Joined
8/7/2019
Location
SK
2 hours ago
Previously I thought the T Type clutches really sucked because of all my chain noise but I have now realized my bike sounds like a shopping...

Previously I thought the T Type clutches really sucked because of all my chain noise but I have now realized my bike sounds like a shopping cart because the side of the chain hits the cog beside it and jingles and reverberates like mad. The chain has virtually no clearance, which I assume is standard. When you lightly tap the chain or the cassette with your finger, its like your playing the triangle. Landing two degrees sideways makes it sound like a shit.


 What options are there for this? Hot waxing your chain to give some damping? Belt conversion kit? 

X0 derailleur and chain, GX cassette. Two upper, 1 lower STFU damper, O chain. It's all there and doesn't help at all.

It should be possible to fit appropriately sized o rings between few of the low end gears, that should help with the ringing 

Post a reply to: Silent Bikes - What tricks do you have to keep your bike quiet through the season?

The Latest