Yup, 230x60, size 17.5. The piggy touches the shift cable slightly at bottom out but it's not going to contact the frame. Been bottoming out 10x a month for the last 12 months and still on the original shifter cable so I think it should be ok. With the 400lb coil, its at 33% sag at my weight (155lbs geared up). With a 450lb coil, I am at 28-29% sag. Both springs work, just depends on how much sag you want to run. When running 400lb, I add more HSC to prevent bottom out. With 450lbs, I can remove most...