Pump1_rev1c Custom 26" Pump bike
4/1/2019 7:18am
Parts
Brand
Model
Additional info
Parts
Frame
Other
Pump_rev1c
Custom
Frame:
Other Pump_rev1c.
Misc: Custom
Fork
DT Swiss
XMM 120 Single Shot Fork
Fork:
DT Swiss XMM 120 Single Shot Fork
Headset
Other
Scrap Bin
Headset:
Other Scrap Bin
Handlebar
Easton
Handlebar:
Easton
Stem
Race Face
Evolve XC Stem
Stem:
Race Face Evolve XC Stem
Grips
Oury
Grips:
Oury
Brakes
Shimano
XT
Brakes:
Shimano XT
Cranks
Race Face
Cranks:
Race Face
Bottom Bracket
Race Face
Bottom Bracket:
Race Face
Chain
KMC
Chain:
KMC
Cassette / Rear Cog
Other
Cassette / Rear Cog:
Other
Front Rim
DT Swiss
Front Rim:
DT Swiss
Rear Rim
DT Swiss
Rear Rim:
DT Swiss
Hubs
DT Swiss
Hubs:
DT Swiss
Spokes
DT Swiss
Spokes:
DT Swiss
Front Tire
Kenda
Slant Six
26"
Front Tire:
Kenda Slant Six.
Misc: 26"
Rear Tire
Kenda
Slant Six
26"
Rear Tire:
Kenda Slant Six.
Misc: 26"
Saddle
Cannondale
Ex Girlfriends
shhh!
Saddle:
Cannondale Ex Girlfriends.
Misc: shhh!
Seatpost
Other
Scrap Bin
Seatpost:
Other Scrap Bin
Seatpost Clamp
Other
Weld Nuts and 4130 Steel
Seatpost Clamp:
Other Weld Nuts and 4130 Steel
General Info
General Info
Model Year
2019
Model Year:
2019
Intended Use
Dirt Jump/Pumptrack
Intended Use:
Dirt Jump/Pumptrack
Weight
23 lb 10 oz (10716 g)
Weight: 23 lb 10 oz (10716 g)
Additional Info
Been wanting to build my own frame for a long time. This was done over the month of March, after business hours in my work shop. I did a very basic jig build concurrently with this as well. Most of the geo is based off of a Santa Cruz long Jackal, but modified for a 120mm fork. I cleaned out my scrap bin to do the assembly, and this being my first frame, I was not going to bother with new parts. 4130 steel, Paragon sliding drops. 69° head angle, 418mm reach, 560mm stack. Chainstay length about 400mm. BikeCAD for the design work. Frame weight came in at 1860 grams.
Additional Info:
Been wanting to build my own frame for a long time. This was done over the month of March, after business hours in my work shop. I did a very basic jig build concurrently with this as well. Most of the geo is based off of a Santa Cruz long Jackal, but modified for a 120mm fork. I cleaned out my scrap bin to do the assembly, and this being my first frame, I was not going to bother with new parts. 4130 steel, Paragon sliding drops. 69° head angle, 418mm reach, 560mm stack. Chainstay length about 400mm. BikeCAD for the design work. Frame weight came in at 1860 grams.
4/1/2019 7:18am
0 comments
To post, please join, log in or connect to Vital using your Facebook profile Login with Facebook.
More Bike Checks
Homemade Enduro Bike (Steel Scott Voltage Freeride)
Tburkhardt_
18 Photos
Updated: 30/07/2025
42
2655
8
