Accessibility Widget: On | Off
Commencal Introduces the Furious DH

SIMPLICITY IS BEAUTY

Our objective with the FURIOUS DH platform was to create a sleek bike that has the ability to smash times thanks to its dynamism, whilst also putting a smile on any freerider's face.

The FURIOUS is crammed with technology drawn from all previous frames developed at COMMENCAL, every detail has been refined - kinematics, geometry and the frame construction.

Photo

SIMPLE is not simple

Photo

The FURIOUS uses Al 6066 triple butted tubes shaped to optimize the mechanical performance and weight. This allows us to control the flex characteristics for a compliant and precise bike.

As always,reliability remains a priority at COMMENCAL. The bearings are oversized to ensure a longer life, the rocker is designed to minimize the stress on the shock allowing for better suspension performance. The rocker is integrated into the seat stay to form a single piece. This integration is part of the personality of the FURIOUS and gives it a sleek look.

The shock mount is embedded in the down tube, again adding to a clean aesthetic finish. We continue to provide internal cable routing. The cables pass as close to the main pivot point as possible to minimize movement and prevent premature wear.

New seals inserts ensure a perfect fit with the added bonus of a higher quality end-product. The chainstay protector is made by double density injection. The polypropylene chassis provides a tight fit with the chainstay and the specially designed rubber layer helps to dampen the chain for a silent ride.

The FURIOUS also includes specifically designed down tube protection to avoid damage from flying debris when riding.

Construction

Photo

Year after year we continue to believe in our Contact System and we adapt it for each discipline. We have kept a single main pivot because we don’t believe there is a better solution to ensure consistency. The goal is to offer a bike that is easy to handle, predictable and very well balanced from front to back. Keeping the bike balanced is effortless and as a result, you can save energy and in turn, everything becomes easier! With the FURIOUS, we wanted the best possible ratio of comfort-to-dynamism. That’s why the main pivot is located in this specific spot. This position avoids generating too much kickback which can negatively affect the suspension performance.

We use chain tension to get that lively frame we wanted. This is pretty helpful to gain speed in compressions and when exiting corners. It also gives more support on take-offs providing great jumping characteristics.

As usual, our kinematics are progressive to provide grip, support and control at the end of travel. The FURIOUS introduces the « Progressive Contact System ». An S size is more linear than an XL. If we assume that someone who rides a size small is lighter than a rider who chooses an XL, a bike that is too progressive will prevent them from being able to use the entirety of the travel. In contrast, a heavier rider will need more a progressive feel to get more support and to avoid bottoming out. With the Progressive Contact System, we don’t make any compromises, but instead we ensure the dynamics are relevant for each size of bike and rider.

Contact System

Photo

The level of riding and bike performance are increasing. The need for stability is becoming greater and more important than ever. The FURIOUS has a long front end that provides stability and excellent grip for the front wheel. Still, we wanted a fun bike too so we used a short chain stay to get a bike that is easy to ride, easy to corner, responsive to changes in trajectory and playful over jumps. For the same reasons, the head angle remains pretty standard for this category. The bike gives confidence in steep conditions, remains easy to corner and fun to ride.

Geometry

Photo

Photo

2017 Commencal Furious Highlights

  • Al6066 Triple Butted
  • 200mm Travel
  • Progressive Contact System
  • 9’’ 1/2 * 3’’ Shock
  • 150mm * 12mm Rear Axle
  • Tapered Head Tube ZS44 / ZS56
  • BB107 Bottom Bracket
  • Double Density Chain Stay Protector
  • Down Tube Protector
  • New Internal Routing Seals
  • 12x150mm Rear Axle, Standard IS
  • Big Range Seat Tube Insertion
  • 200mm Travel
  • 9’’ 1/2 * 3’’ Shock

Build Kits and Pricing

Photo
Photo
Photo
Photo

Photo


For more information, head on over to www.commencal.com.

Create New Tag
3 comments
Show More Comment(s) / Leave a Comment