Posts
30
Joined
1/12/2010
Location
Lerum
SE
Edited Date/Time
8/16/2014 9:51pm
Hello!
Just to stir it up in this forum (as seen on news on the webnews) i have a delicate issue i belive you guys on the forum can help me with.
Im looking for a new cockpit (stem & handlebars) , but im not sure how i whant it.
Demands on Stem is no degrees and 45mm as longest with a 31,8mm clamp, and Handlebars must have at least 35mm rise and as the most 55mm.
Give me any tip, not to light not to expensive and not to flashy.
Thanks up ahead, Pz!
Just to stir it up in this forum (as seen on news on the webnews) i have a delicate issue i belive you guys on the forum can help me with.
Im looking for a new cockpit (stem & handlebars) , but im not sure how i whant it.
Demands on Stem is no degrees and 45mm as longest with a 31,8mm clamp, and Handlebars must have at least 35mm rise and as the most 55mm.
Give me any tip, not to light not to expensive and not to flashy.
Thanks up ahead, Pz!
are you looking for DH stem?
http://www.pricepoint.com/detail/20001-195_TRUHS0-3-Parts-62-Handlebars…
Truvativ Holzfeller stem short and sweet a choice between 40 or 60mm length
http://www.pricepoint.com/detail/19670-305_TRUHZ9-3-Parts-72-Stems/Truv…
both are pretty cheap and standard nothing to special like you asked
Marting14: well i know for a fact that Truvativ components are quality and such but i dont know if i like em, sure not so special but they are tooooooooo common.
Bar Bore Ø31.8. Stack Height 26mm
Sex Bolt 8mm. High Torque Lock-Down
3D Forged CNC Construction
Zirconium Doped Alloy
Length: 35mm
Weight: 150g + 20g (Top Cap & Rose Bolt Assembly)
Color: White/Black/Chrome
Custom Stem Top Cap And Rose Nut
Super Low Profile, Super Short
Matching bar...
Super Six Alloy
Ø31.8mm
Rise: 5/15/30/50mm
Length: 777mm
Dual XGT Taper with Impact Ends
Weight: from 280g to 318g
Color: White/Black/Chrome
Post a reply to: Need New Cockpit?!