Added a comment to fisha's bike check 10/5/2015 2:09 AM

It was soda blasted and rubbed down with a fine wet and dry grit

0 0 0

This setup has 13 comments.

Added a comment to fisha's bike check 9/23/2015 7:33 AM

The shock length remains the same i2i bot the bolting of the shock is longer which extends the rear end to give the required clearance for 27.5

0 0 0

This setup has 13 comments.

Liked a comment on the item Transition Covert Custom 650b Bare Carbon 9/23/2015 7:32 AM

For the 27.5 you are using the offset bushings to lengthen the shock correct?

Added a comment to fisha's bike check 9/23/2015 12:04 AM

BB is a tad higher but overall it rides fantastic. I had used it with 26" and the offset bushings to slacken the bike and that was good. With the 27.5" conversion and angleset it's a whole new ball game. It's a monster going downhill but nimble on the climbs too. The rear chain stays are identical to the 650b alloy so clearance is good too

0 0 0

This setup has 13 comments.

Added a comment to fisha's bike check 9/21/2015 11:32 PM

No drop outs needed. Using the offset bushings gave additional clearance at the back. I used a 1 degree angle headset to re adjust the head angle

0 0 0

This setup has 13 comments.

Added a comment to fisha's bike check 9/20/2015 8:30 AM

This setup has 13 comments.

Added a comment to fisha's bike check 9/20/2015 4:53 AM

Thanks man!!

0 0 0

This setup has 13 comments.

Added bike check Transition Covert Custom 650b Bare Carbon 9/17/2015 2:03 AM
Added bike check Santa Cruz V10.4 Carbon Raw 4/9/2015 2:17 PM
Added bike check Fisha's Intense SS2 Slopestyle Enduro Mini DH 12/10/2012 12:30 PM