Recent Activity
All
Dirt Bag Racing Liked a reply to forum topic What Frame/Component/Gear/Accessory do you Wish existed?
4/23/2025 4:31am I wish Vans would make a real mountain bike shoe with proper toe protection, flats and clipless. Every other brand just makes ugly ugly shoes.
This forum topic has 88 replies.
Fine Tune Cycles Added a comment about bike check Custom painted Trek session
3/19/2025 7:37am
This bike check has 2 comments.
Fine Tune Cycles
Added bike check Custom painted Trek session
3/19/2025 2:48am
nicasucksdude Liked a comment about bike check Custom Transition ripcord
3/3/2025 11:06am
This bike check has 2 comments.
Fine Tune Cycles Added a comment about bike check Custom Transition ripcord
3/3/2025 11:06am I ended up using a white primer base, then Montana Aztec gold, followed by Montana metallic gold. It’s not exactly the same, but pretty close. The fox colour is probably closer to brass than straight up gold, but I’m happy with the result, as is my customer!
This bike check has 2 comments.
Fine Tune Cycles
Added bike check Custom Transition ripcord
3/3/2025 1:19am
Splayleg Liked a comment about bike check Custom painted Kona process 153 G3
1/8/2025 1:47am
This bike check has 9 comments.
Fine Tune Cycles Added a comment about bike check Custom painted Kona process 153 G3
1/8/2025 1:47am It’s a recent one- “roads? Where we’re going we don’t need roads…” couldn’t resist as it’s from one of my favourite films! He does some cracking stuff.
Votes:
This bike check has 9 comments.
Fine Tune Cycles Added a comment about bike check Custom painted Kona process 153 G3
1/7/2025 7:10am
This bike check has 9 comments.
Fine Tune Cycles Added a comment about bike check Custom painted Kona process 153 G3
1/7/2025 5:15am
This bike check has 9 comments.
Fine Tune Cycles Added a comment about bike check Custom painted Kona process 153 G3
1/6/2025 12:37pm It certainly seems pretty tough, during assembly I accidentally dropped the seatstay onto my concrete workshop floor and nothing happened, so fingers crossed! RideWrap should keep it pretty well protected too…
This bike check has 9 comments.
Fine Tune Cycles
Added bike check Custom painted Kona process 153 G3
1/6/2025 4:45am
Fine Tune Cycles Added a reply to MTB Tech Rumors and Innovation
12/9/2024 3:58am I knew there must have been a reason no one had done it up to now, seems too simple for someone cleverer than me to not try it…
Fine Tune Cycles Added a reply to MTB Tech Rumors and Innovation
12/8/2024 2:23pm Regarding wireless droppers, I wonder if it would be possible to make a similar system to the archer d1x gear shifting system. A remote, Bluetooth activated servo that opens/closes the cable end of any current cable actuated dropper post with a small cable spool. Surely it wouldn’t be too hard to do? The only bikes that it would struggle with...
Fine Tune Cycles Added a reply to MTB Tech Rumors and Innovation
11/28/2024 3:31am I hadn’t realised the new Bosch cx5 stuff was that much lighter, the older stuff was a fair bit heavier for equivalent battery capacity. The DJI bike must have saved a chunk in the frame too as the specs on the bike ware more than acceptable for the intended riding, you’d probably swap in some heavier casing tyres but otherwise...
Fine Tune Cycles Added a reply to MTB Tech Rumors and Innovation
11/27/2024 12:57am I’ve ridden it a little as a riding buddy works for DJI and it’s a big step up in terms of power compared to Bosch, brose and Shimano motors. The software and a few little extras built in seem really clever, the adaptive power mode (like Bosch e-Mtb) uses some built into the bike pitch and yaw sensors so it...
Fine Tune Cycles Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
6/20/2024 2:42am A couple of things I’ve found help to get the absolute best out of the newer Hope brakes. 1 while performing the gravity bleed with the bleed cup on the lever start with the pistons retracted into the calliper, then when the fluid is all coming through fresh extend the pistons and then open the bleed reservoir and allow about...
Hamburgi Liked a reply to forum topic Nerding out on Brakes shall we? Not another tech deraliment
4/28/2024 2:27pm
This forum topic has 2862 replies.
Fine Tune Cycles Added a reply to Nerding out on Brakes shall we? Not another tech deraliment
4/26/2024 2:23pm A couple of things I’ve found help to get the absolute best out of the newer Hope brakes. 1 while performing the gravity bleed with the bleed cup on the lever start with the pistons retracted into the calliper, then when the fluid is all coming through fresh extend the pistons and then open the bleed reservoir and allow about...
josh_Deviate Liked a bike check Deviate Highlander II - The Rainbow Warrior
3/7/2024 5:34am
This bike check has 8 comments.