Accessibility Widget: On | Off
Added a comment to cody.souisa's bike check 4/6/2017 2:27 PM
Meta AM V4.2 DVO

Thank you! The crank is a standard SLX non-boost and the chainring is a OneUp 32T oval ring and bolted straight to the crank. It works really well as it is, I can't see how a boost crank will be better since my chainline is about 51mm and looks straight in the middle cog. Def get some clear tape on the seat/chainstays to protect from shoe rub.

0 0 0

This setup has 11 comments.

Added a comment to cody.souisa's bike check 1/18/2017 6:42 PM
Meta AM V4.2 DVO

Thank you, yea I had a 2x slx crank laying around so I slapped it on. Fortunately I didn't have to use any spacers to get a ~51mm chainline which I believe is the boost spec. I bolted the oneup chainring directly to the spider. You should be able to make it work with little effort. I do plan on switching to a turbine cinch crankset though.

0 0 0

This setup has 11 comments.

Added a comment to cody.souisa's bike check 1/16/2017 7:56 AM
Meta AM V4.2 DVO

Thanks! Yea, I have a boostinator kit for the DT Swiss rear. I ordered it from Wolf Tooths website, I believe Jenson had some boost adapters but not for the 350 rear yet.

0 0 0

This setup has 11 comments.

Added a comment to cody.souisa's bike check 1/13/2017 11:03 AM
Meta AM V4.2 DVO

Thanks!

0 0 0

This setup has 11 comments.

Added bike check Meta AM V4.2 DVO 1/12/2017 11:04 AM
Meta AM V4.2 DVO