Wolf Tooth 104 BCD Bash Ring

Compatibility
• These are for use with 104 BCD chainrings or 64 BCD chainrings on 104 BCD cranksets
• These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position
• They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface.
• These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring.
• Chainring bolt requirements for this bashring
• 104 x 30t - 10mm bolts are required for use with the bashring.
• Other 104 BCD sizes - you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these.
• When using with the 64 BCD you will need 6mm bolts to mount the bashring.

Note: Orient the head of the bolt to the inside to provide clearance for the chain (bolts will go in backwards).