I want to get a two-inch hitch installed on my vehicle. Any recommendations?

There are usually a few options available for every vehicle when it comes to installing a hitch. There are two ways to do this:

Have it installed by a third-party

Do an online search for hitch installation in your area and request the product mentioned above. If you’re located in Utah, we highly recommend PARDS.

Do it yourself

Order a class 3 rated 2-inch receiver with a 500 pound tongue weight (if possible) for your specific vehicle. We recommend checking out etrailer for the best selection, but be sure to shop around. Avoid purchasing anything that is recessed or hidden, as this may limit your clearance for many products and restrict what you can plug in to your receiver. The receiver face should be in line with your bumper or further out. Round tube receivers have much better torsional tolerances than square tube receivers and also have a higher tongue weight rating. Lastly, be sure to use Loctite when installing the receiver and check the bolts annually.

Once you have your receiver installed, get a rack for it here!: https://www.altaracks.com/racks/ 

Subscribe to our YouTube: https://www.youtube.com/@altaracks