Wolf Tooth CAMO Direct Mount Spider For Cannondale

Compatibility
• This is a spider for use with the Cannondale cranksets that have a removable spider
• 3 different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth:
• M9 (minus 9mm - standard dish towards the frame)
• For use on standard (non-Ai offset) mountain bikes
• M4 (minus 4mm - Ai offset)
• For use on Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes
• For use on 2x Fat CAAD (a 166mm spindle)
• M1 (minus 1mm - dished towards the frame)
• For use on 1x Fat CAAD bikes (a 160mm spindle)
• M1 (minus 1mm - dished towards the frame)
• Cannondale cyclocross and road bikes (38T max CAMO chainring)
• Ai cyclocross bikes with 155mm spindle (38T max CAMO chainring)
• FSA direct mount cranksets using boost chainline are compatible with Camo M9 (minus 9mm) offset spider when using the Wolf Tooth 2.5mm FSA spacer available separately.
• CAMO mounting bolts can be purchased separately, but all the CAMO spiders come with stainless steel bolts if you don't order them.
• All Camo Spiders are not compatible with Bash Guide ISCG05
Installation notes:
• You will be able to access all bolts without removing the spider
• Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.
• Be sure the bosses on the spider "plug in" to the chainring.
• Torque bolts only to 4-5 Nm and use blue Loctite threadlock