Accessibility Widget: On | Off

Banshee Phantom V3 Frame

Banshee Phantom V3 (raw)
 Banshee Phantom V3 Frame  Banshee Phantom V3 Frame  Banshee Phantom V3 Frame  Banshee Phantom V3 Frame  Banshee Phantom V3 Frame
Create New Tag

Compare to other Frames

Need more info? View our Trail Mountain Bike Frames buyer's guide.


Product Banshee Phantom V3 Frame
Riding Type Trail
Rider Unisex
Sizes and Geometry
M, L, XL View Geometry
Size M L XL
Top Tube Length 592mm 620mm 646mm
Head Tube Angle 66° (low), 66.5° (neutral) 66° (low), 66.5° (neutral) 66° (low), 66.5° (neutral)
Head Tube Length 120mm 130mm 130mm
Seat Tube Angle 76.0° (low), 76.5° (neutral) 76.0° (low), 76.5° (neutral) 76.0° (low), 76.5° (neutral)
Seat Tube Length 430mm 455mm 490mm
Bottom Bracket Height 333mm (low), 342mm (neutral) 333mm (low), 342mm (neutral) 333mm (low), 342mm (neutral)
Chainstay Length 445mm 445mm 445mm
Wheelbase 1199mm 1227mm 1253mm
Standover 721mm 738mm 753mm
Reach 445mm 470mm 495mm
Stack 620mm 629mm 629mm
* Additional Info As measured with 29" wheels and 537mm axle-to-crown fork with 44mm offset
For additional values, see the geometry table included in photos above
Wheel Size 27.5" (650b), 29"
Frame Material Aluminum
Frame Material Details Hydroformed 7005 T6 alloy tubes and forgings
Rear Travel 115mm
Rear Shock FOX DPX2 Performance Elite, Trunnion 185x50mm (30.0x8mm hardware at lower mount)
Head Tube Diameter Tapered with pre-installed headset (44mm|56mm, 1.125" zero stack top, 1.5" zero stack bottom)
Bottom Bracket 73mm threaded
Rear Dropout / Hub Dimensions Modular dropout system with 12x142mm and 12x148mm boost options (generation 2)
Front Derailleur Size N/A
Seatpost Diameter 31.6mm (34.9mm clamp)
Max Tire Size 29x2.6” or 27.5x3.0” (compact dropouts), 29x3.0” (long dropouts)
ISCG Tabs Splined ISCG-05 plates
Bottle Cage Mounts Yes – inside the frame and can accommodate a full-sized bottle
Colors Raw or black
Warranty 4 years
Weight 7 lb 13.2 oz (3,550 g)
Miscellaneous Frameset includes a choice of dropouts
Fork travel range: 120-140mm (single crown only)
Splined ISCG-05 plate can be rotated to optimize any chainguide and be replaced if damaged
Internally ribbed stays for lateral stiffness and strength to weight ratio
Custom 3D heat injected rubber chainstay protector
3D forged 7005 T6 shock cage offers load isolation and a lower center of mass
KS2 link suspension design
Suggested sag: 25-28% (11.3-13.0mm of shock compression)
Price $2,899
More Info

More Products