Accessibility Widget: On | Off

Santa Cruz Nomad C Reserve Custom Build! Size LG

Create New Tag

7/15/2020 7:18 PM
Edited Date/Time: 7/22/2020 10:50 AM


Category: All Mountain/Enduro Bikes
Condition: Excellent
Frame Size: L
Wheel Size: 27.5" / 650B
Material: Carbon Fiber
Front Travel: 180 mm
Rear Travel: 170 mm

Asking: $5,000 USD
Will Ship within North America only

Originally bought as a C-S Kit, replaced almost every component, this is now my dream build for park smashing, enduro, freeride, and everything down to xc cruising. This bike is amazing as a do-it-all single crown. I have no mechanical problems with this bike, and will do my best to make sure you have the same experience. My reasons are for wanting to try an XL trail bike and a DH rig instead of one enduro bike. All parts have 6mo use, unless specified otherwise, by an experienced and meticulous mechanic. It's almost in the workshop more than on the trail; no one likes a noisy bike. Well I'm very sad to be putting it up but it is what it is. Tough time never last. Only tough people last. Lemblulemblamblambluolouhhh. Specs below. Enjoy.

*Original Santa Cruz spare parts and Dry Bag Included*
*Can Remove DyedBro Decals On Request*
*Will include spare Fox Factory RW&B decals*
*Fenders/50to01 Stem Cap/Fabric Saddle NOT included*
*Pedals optional, 2017 Spec Boomslang, rebuilt yearly*
*Stock Super Deluxe R shock included, never used*

Carbon C Frame, “Matte Carbon/Olive”, DYEDBro frame protectors installed on original frame before building
^Propack (pivot bearings, axles, shields, sleeves) installed Feb ‘20
*Saddle: Choose between stock '19 WTB Volt(very nice, I use this on my road bike currently) or '20 Spec Power Arc Expert
Reserve 30 wheels, DT Swiss 370 hubs w/ MicroSpline AND XD freehub included
CushCore Pro with green valves
Maxxis Minion DHF 2.5WT, Minion DHRII 2.4WT (both brand new replacements, rear installed, front waiting for purchase)
Fox Factory 36, 180mm (Used since bike was new, Rebuilt by Fox Feb '20)(will include 170mm spring!)
Fox Factory X2, 230x60mm with Fox cartridge bearing hardware (Used since bike was new, rebuilt by Fox Feb '20)
OneUp Dropper V2, 210mm (travel shims etc included unused), OneUp remote I-Spec EV, Dura-Ace cable system
^50hr lower tube clean and grease done, no dmg noted
OneUp BashGuide with extra shims and hardware
Cane Creek 40 IS headset (original, swapped for Chris King in picture, you keep the excellent Chris King star nut in the fork)
RaceFace Aeffect R 50mm Stem, 20mm rise Handlebars uncut 780mm (original)
Sensus DISISDABOSS lock on grips, gum/red, 3mo use
Shimano Saint threaded BB
Shimano XT M8100/8120 12s drivetrain / cranks / 4 piston brakes
^brakes bled often, drivetrain cleaned/lubed daily
Extra XT 12s chain included
Thanks for looking! I hope this bike continues to bring joy to its next owner.