Accessibility Widget: On | Off

Photo

Our trip to the Arizona desert with Devinci a few months back wasn’t just for the introduction to their all new Django. They had another bike, a bigger bike, that they wanted us to check out. Development started way back in 2013, based around 26” wheels. But with the push of 27.5 in the downhill segment, a from-the-ground-up approach had to be taken. The first 26" prototypes were scrapped and Devinci began with their 27.5" prototyping. Early signs were promising, with team riders shaving five-seconds off an already-familiar two-minute track. Clearly, 27.5” was the way to go for Devinci and the beginning of the carbon Wilson started to take shape as last year's alloy Wilson 27.5". Featuring an EPS-molded full carbon front triangle and seat stays, the new 2016 Wilson Carbon is lighter, stiffer and a stronger performer than previous models.

Photo

Devinci Wilson Carbon Features

  • Split Pivot Suspension System
  • Asymmetrical construction
  • DMC-G Carbon with EPS-molded front triangle and seat stays
  • Integrated fork bumpers / cable guides
  • 2.5” tire clearance
  • 200mm travel
  • Carbon skid plate for down tube protection
  • Grease ports on rockers
  • Weight: 35lbs (Med frame SL7s build kit)
  • MSRP: Available in three builds ranging from $4,659 to $7,759 USD

Photo

Devinci Wilson Geometry

Photo

Devinci Wilson Build Kits


SL7s

  • Fork - RockShox BoXXer World Cup
  • Shock - RockShox Vivid R2C
  • Groupset - SRAM X01 DH
  • Crankset - SRAM X01 DH 36T
  • Brakes - SRAM Guide Ultimate
  • Wheels - Easton Havoc
  • Tires - Schwalbe Magic Mary 2.35” Vertstar Supergravity
  • Cassette - SRAM 7S 10-24T
  • Saddle- Prologo X20 Downhill
  • Seatpost - V2 Pro
  • Handlebar - Chromag BZA 35 800mm
  • MSRP - $7,759

RC10s

  • Fork - RockShox BoXXer Team
  • Shock - RockShox Vivid R2C
  • Groupset - SRAM X9
  • Crankset - Truvativ Descendant 36T
  • Brakes - SRAM Guide RS
  • Rims and Hubs - DT Swiss 533D / DT Swiss 350
  • Tires - Maxxis Highroller II 2.4” 3C Compound 2-Ply
  • Cassette - Shimano 10S 11-28T
  • Saddle - SDG Fly RL
  • Seatpost - V2 Pro
  • Handlebar - Truvativ Steve Smith 780mm
  • MSRP - $5,959

XP10s

  • Fork - RockShox BoXXer RC
  • Shock - RockShox Vivid R2C
  • Groupset - SRAM X7
  • Crankset - Truvativ Hussefelt 1.0 36T
  • Brakes - SRAM Guide R
  • Rims and Hubs - DT Swiss 533D / Formula
  • Tires - Maxxis Highroller II 2.4” 3C Compound 2-Ply
  • Cassette - Shimano 10S 11-28T
  • Saddle - SDG Fly RL
  • Seatpost - V2 Comp
  • Handlebar - V2 Pro Riserbar 780mm
  • MSRP - $4,659

Photo

Initial Impressions

We have to admit, carbon looks good on the Wilson. While the overall lines have remained fairly consistent when compared to last year’s Wilson, the updated carbon front triangle just looks like a clean, mean downhilling machine. With proper external cable routing that runs on the underside of the top tube, integrated fork bumpers that double as cable guides and that big, burly signature seat stay, the new Wilson means business. We’ve been putting in laps on Devinci's highest-end build for the Wilson, the SL7S. Highlights of the build-kit include SRAM’s X01 DH drivetrain, a RockShox BoXXer World Cup and Vivid R2C as well as some proper 800mm Chromag BZA 35 bars and Easton Havoc wheels. Our large frame bike weighed in at 36 LBS (16.33 KG) on the dot (tested).

Photo

We started with Devinci’s recommended base settings for the fork and shock. Devinci had installed three Bottomless Tokens in the BoXXer World Cup. We set the pressure to put us around 20% sag up front and started with a spring for the rear shock that put us a bit deeper into the bike's sag than we’d typically run, about 35%. To make set up a bit easier, Devinci laser etched a sag meter on the rocker to help you get things dialed in.

After dialing in the bike as best as possible, we set off on the rough ride that is Phoenix’s Geronimo trail. Having previously only ridden this particular trail on 115-160mm bikes, right away we were flying through sections that had kept us on our toes. While that’s expected when comparing a 200mm DH bike to a 160mm trail bike, it was a welcomed feeling. If you’ve not experienced Geronimo, it’s non-stop chunky goodness from top to bottom. Long sections of square-edged hit after square-edged hit was the basic theme. The Wilson let us tackle the tricky terrain confidently. Another thing we noticed right away was that the Wilson is a responsive pedaler. Sprinting and pedaling out of corners, the bike quickly gets up to speed.

Photo

While 35% rear sag is a bit more than we’d typically run, especially when Devinci recommends closer to 30%, we found the bike to bottom a bit more frequently than normal. While it did bottom more often, we were actually surprised that it wasn’t ever a harsh bottom and quite honestly, we expected it to occur more than it did. Perhaps a testament to Devinci’s claim of a progressive last 10% of travel. Once we got the bike home and threw a 50-pound heavier spring on it, the semi-frequent bottom outs turned to occasional bottom outs which is more typical of a downhill bike. Sag was reduced to just under 30% with the new spring and we were still able to take full advantage of the available travel. The heavier spring also helped keep the bike stable during heavy cornering situations as it helped reduce wallow a good deal.

Speaking of cornering, we found the Wilson to be excellent. At the claimed 13.7-inch (348mm) bottom bracket height and low center of gravity, we  pushed the bike as hard as we could in the turns and never felt like we had to back it off. While that low bottom bracket is great for cornering, we did hit the bash guard a few times in rough, rocky sections of trail. But, that’s what a bash guard’s for, right? Luckily we never had any scary moments or close calls because of the strikes.

We're still putting in the vertical feet aboard the Wilson with an in-depth ride review on the way. Stay tuned.

Photo

For more information, check out devinci.com

Words / Photos by Fred Robinson

Create New Tag

FredLikesTrikes FredLikesTrikes 3/29/2016 1:00 AM

1 comment newest first

Show More Comment(s)