Accessibility Widget: On | Off

Yeti SB150 Custom 19

Create New Tag
Frame: Yeti SB150 T-Series. Misc.: Custom yellow. Size M
Rear Shock: FOX Float X2 Factory 2021
Fork: Fox 38
Headset: Chris King Dropset
Handlebar: OneUp Components . Misc.: 35mm rise
Stem: Renthal . Misc.: 50mm
Grips: ODI
Brakes: SRAM Code RSC. Misc.: 200mm f/r
Brake Levers: SRAM Code RSC
Shifters: SRAM Eagle AXS
Rear Derailleur: SRAM Eagle X01 AXS
Chainguide: e*thirteen
Cranks: SRAM X01. Misc.: 170mm
Chainrings / Sprocket: SRAM . Misc.: 32 tooth tooth
Bottom Bracket: SRAM
Chain: SRAM XX1
Cassette / Rear Cog: SRAM XO1 Eagle
Pedals: Shimano Saint SPD
Front Rim: Other e*thirteen TRSr SL
Rear Rim: Other e*thirteen TRSr SL
Hubs: Other e*thirteen TRSr SL
Front Tire: Maxxis Assegai. Misc.: or DHF
Rear Tire: Maxxis Assegai. Misc.: or DHF
Saddle: SDG
Seatpost: RockShox Reverb AXS. Misc.: 170mm
General Info
Model Year: 2020
Riding Type: Trail / All-Mountain

Vital MTB member LTrumpore LTrumpore 4/11/2019 1:23 PM

  • Next Bike Check
  • 1796 of 14197

19 comments newest first

Hey Lee, I LOVE the finish of your forks ! Is there any chance you could share the process you followed to get this result ?
Any dulling to report so far ?
Thanks a lot !

| Reply

Some paint stripper gel from the hardware store and some scraping to get most of the original finish off, a rotary sander to remove the rest and give it a bit of a rough shine, but not so far as to polish it. The back side of the arch is actually painted silver to match rather than trying to get all the red paint out of the honeycomb sections. Finished off with a few layers of urethane clear coat.

| Reply

Hi, you don`t have a problem whit de 2.5 in the rear tire?
And the grey color in the yellw section of the frame , its a paint or tape??


| Reply

Is that rear cable for braking data or is there an accelerometer on the rear triangle? Would love to know what you learn from the data if you can divulge as I am running a 150 this year.

| Reply

The rear brake mount houses sensors to measure axel movement, wheel lockup, wheel speed, and also some circuitry for the rear brake pressure sensor. Working on the edit now, but there should be a full report and video of what we learned on the site in a few weeks.

| Reply
Show More Comment(s)

More Bike Checks