Hot Carl 19
Create New Tag
| Parts | Brand | Model | Additional info |
| Frame | Evil | Wreckoning LB | Rusty Trombone |
|---|---|---|---|
| Rear Shock | Push | Elevensix | |
| Fork | Fox Racing Shox | Factory 36 | Grip 2 170mm |
| Headset | FSA | ||
| Handlebar | ENVE | M7 | 40mm rise 35mm Clamp |
| Stem | Enve Composites | Carbon Fiber Mountain Stem | 50mm |
| Grips | Ergon | GE1 Evo Factory | |
| Brakes | Shimano | ZEE | 203f 180r |
| Brake Levers | Shimano | ZEE | |
| Shifters | Shimano | XT SL-M8000 | |
| Front Derailleur | ------- | ||
| Rear Derailleur | Shimano | XT M8000 Shadow+ | |
| Chainguide | MRP | Sxg | |
| Cranks | Shimano | XT M8000 | 170mm |
| Chainrings / Sprocket | Shimano | XT M8000 | 32t |
| Bottom Bracket | Shimano | XT M8000 | |
| Chain | Shimano | CN HG 901 | |
| Cassette / Rear Cog | Shimano | XT M8000 11-46 | |
| Pedals | Shimano | Saint M 820 SPD | |
| Front Rim | ENVE | M735 | With Pinch flat protective rim strip |
| Rear Rim | ENVE | M735 | With Pinch flat protective rim strip |
| Hubs | DT Swiss | 240s Centerlock | 54t Ratchet Upgrade |
| Spokes | DT Swiss | Aerolite | |
| Front Tire | Maxxis | Shorty 2.5 WT | MaxxGripp DH Casing |
| Rear Tire | Maxxis | Minnion DHR II 2.4 WT | MaxxGripp DH Casing |
| Saddle | WTB | Volt Titanium | |
| Seatpost | Fox Racing Shox | Transfer Factory 150mm | Wolf Tooth I-Spec A/B Lever |
| Seatpost Clamp | ------- |
| General Info | ||
| Model Year | 2019 | |
|---|---|---|
| Riding Type | Trail / All-Mountain | |
| Weight | 35 lb 8 oz (16103 g) | |
19 comments
More Bike Checks
DEALS
The Latest
Most Popular
- @cache_main: 4c5239d4c9ce42decb13c9e61f82e63c
Joe Moto
7/26/2018 2:25 PM
Did you shim the seat post?
dstucki
7/26/2018 4:53 PM
I did. The techs at SRAM when I was there for the SRAM Technical University told us that the 34.9 Reverb is just a spaced out 31.6 seatpost and they fail more often. They told us just to buy the 31.6 and use a nice shim. I think specialized is the only other company offering a 34.9 seatpost, but I may be wrong. Regardless the Transfer with a Problem Solvers shim is dialed. Havn't had any issues.
Joe Moto
7/26/2018 7:31 PM
Good to know! When my reverb blows up Ill get the shim and drop my Transfer in there.
HORTON406
7/26/2018 12:37 PM
HOT CARL is the best name. Cheers to you my friend!
boaz
7/25/2018 7:33 AM
that’s a phat build. shred machine.
blast_off
7/25/2018 5:59 AM
Beautiful. I'm getting my frame today! Is that weight accurate??
dstucki
7/25/2018 7:13 AM
As accurate as the Park Tool hanging scale is. You have to consider the 2.5/2.4 DH casing tires, the coil rear shock, and it's an XL.
NoahColorado
7/25/2018 3:05 PM
....and the lead fishing weights I put in your seat tube when you wasn't looking. Ha! Goteem.
qblambda
7/25/2018 5:01 AM
Beautiful clean machine! Despite the glossy clearcoat on matte paintjob...
NebulousNate
7/25/2018 6:10 AM
Frame protection?
dstucki
7/25/2018 7:16 AM
Yep. It's 3M Clear Bra Vinyl. I buy it in 4" rolls from Amazon and gloss was all I had. I was leaving the following day for the Trans BC enduro where they shove your bike in U-hauls six days straight for transport. Just trying to protect the frame as much as possible. It is a bit of a shame to cover up the paint job, but it'll keep it looking fresh. The paint on this frame is wild, so many different shades and tones depending on the light.
Nicholas_Porter
7/26/2018 8:54 AM
Check out xpel stealth. It’s basically the same stuff you used with a matte finish. I buy it by the foot directly from Xpel. It’s not cheap if you’re coving a car, but for under $30 you could cover your whole bike, wheels and all.
dstucki
7/26/2018 10:13 AM
Right on. I'll check that out.
nug12182
7/25/2018 3:31 AM
Beautiful bike!them new Industry Nine copper color wheels would look sick on this bike.(not saying your wheels suck)
dstucki
7/25/2018 7:18 AM
They might look good, but this paint job is so unique, it would be really hard to match it with different manufacturer's colors. Almost better to compliment the paint job on the frame instead of trying to match because it just won't look the same. I also can't stand the buzz on I9 wheels. Drives me crazy.
nug12182
7/25/2018 1:49 PM
Me too my friend!!! Hence why I have Onyx hubs.I don't think ill ever ride another hub.
dstucki
7/25/2018 2:53 PM
Ahhhhh, nice, I wanted to go that route with this build, but it all came together too last minute...
iceman2058
7/25/2018 1:41 AM
Bike of the Day July 25, 2018!
Erik_The_Red
7/24/2018 9:05 PM
Man’s bike, I like!