Parts
Frame
Altitude
2018, XL, aluminum, ride-9 pos. 5, 10mm cut off the seat tube, rivnuts added on downtube, VHS Slapper tape on chainstay
Frame:
Rocky Mountain Altitude.
Misc: 2018, XL, aluminum, ride-9 pos. 5, 10mm cut off the seat tube, rivnuts added on downtube, VHS Slapper tape on chainstay
Fork
Durolux
170mm, one volume spacer, Slik Graphics decals matched to frame
Fork:
SR Suntour Durolux.
Misc: 170mm, one volume spacer, Slik Graphics decals matched to frame
Handlebar
XLC HB-M19
31.8, 780mm wide, 50mm rise, 12° sweep, diy "brushed" finish
Handlebar:
Other XLC HB-M19.
Misc: 31.8, 780mm wide, 50mm rise, 12° sweep, diy "brushed" finish
Stem
Defy 35
Chosen for super low stack. Bought the fork used with a short steerer.
Stem:
DMR Defy 35.
Misc: Chosen for super low stack. Bought the fork used with a short steerer.
Grips
Charger EVO Single Compound
with Loam Labs Counterpunch
Grips:
Lizard Skins Charger EVO Single Compound.
Misc: with Loam Labs Counterpunch
Brakes
Code RSC
203mm Magura MDR-C rotors, SRAM metallic pads, hockey tape on levers
Brakes:
SRAM Code RSC.
Misc: 203mm Magura MDR-C rotors, SRAM metallic pads, hockey tape on levers
Shifters:
Shimano XT M8000
Rear Derailleur
SLX RD-M7000
11-46t
Rear Derailleur:
Shimano SLX RD-M7000.
Misc: 11-46t
Cranks:
Shimano SLX M7100
Chainrings / Sprocket
30t
Chainrings / Sprocket:
Shimano.
Misc: 30t
Bottom Bracket:
Other BBB
Cassette / Rear Cog
SLX M7000
Cassette / Rear Cog:
Shimano SLX M7000
Pedals:
Giant Pinner Pro Mg
Front Rim
Fratelli FX35
27.5" i35
Front Rim:
Other Fratelli FX35.
Misc: 27.5" i35
Rear Rim
Stans Sentry
26" i32
Rear Rim:
Other Stans Sentry.
Misc: 26" i32
Front Tire
Butcher
Grid Trail T9 27.5x2.6
Front Tire:
Specialized Butcher.
Misc: Grid Trail T9 27.5x2.6
Rear Tire
Hans Dampf
Super Gravity Soft 26x2.35
Rear Tire:
Schwalbe Hans Dampf.
Misc: Super Gravity Soft 26x2.35
Seatpost
V2 180mm
With Aenomaly Switchgrade
Seatpost:
OneUp Components V2 180mm.
Misc: With Aenomaly Switchgrade
View replies to: Bad Altitude mini-mullet
Comments