Pump1_rev1c Custom 26" Pump bike

Create New Tag
Parts Brand Model Additional info
Frame Other Pump_rev1c Custom
Fork DT Swiss XMM 120 Single Shot Fork
Headset Other Scrap Bin
Handlebar Easton
Stem Race Face Evolve XC Stem
Grips Oury
Brakes Shimano XT
Cranks Race Face
Bottom Bracket Race Face
Chain KMC
Cassette / Rear Cog Other
Front Rim DT Swiss
Rear Rim DT Swiss
Hubs DT Swiss
Spokes DT Swiss
Front Tire Kenda Slant Six 26"
Rear Tire Kenda Slant Six 26"
Saddle Cannondale Ex Girlfriends shhh!
Seatpost Other Scrap Bin
Seatpost Clamp Other Weld Nuts and 4130 Steel
General Info
Model Year 2019
Riding Type Dirt Jump/Urban
Weight 23 lb 10 oz (10716 g)
Additional Info Been wanting to build my own frame for a long time. This was done over the month of March, after business hours in my work shop. I did a very basic jig build concurrently with this as well. Most of the geo is based off of a Santa Cruz long Jackal, but modified for a 120mm fork. I cleaned out my scrap bin to do the assembly, and this being my first frame, I was not going to bother with new parts. 4130 steel, Paragon sliding drops. 69° head angle, 418mm reach, 560mm stack. Chainstay length about 400mm. BikeCAD for the design work. Frame weight came in at 1860 grams.
Show More Comment(s) / Leave a Comment