Knolly Fugitive LT custom "raw blood" 9
| Parts | Brand | Model | Additional info |
| Frame | Knolly | Fugitive LT | custom raw blood |
|---|---|---|---|
| Rear Shock | Fox Racing Shox | DHX2 Factory 2019 | SLS spring |
| Fork | Fox Racing Shox | Float 36 Fitgrip2 Factory | 44mm offset |
| Headset | Cane Creek | Series 40 | ZS44/ZS56 |
| Handlebar | Joystick | Analog Carbon 35 | 30mm rise |
| Stem | Joystick | Builder 35 | 50mm |
| Grips | ODI | Ruffian lock on | orange |
| Brakes | Magura | MT7 Raceline | 203mm |
| Brake Levers | Magura | MT7 Raceline | |
| Shifters | SRAM | X01 Eagle | 12spd |
| Front Derailleur | ------- | ||
| Rear Derailleur | SRAM | X01 Eagle | 12spd |
| Chainguide | ------- | ||
| Cranks | Race Face | Next SL G4 170mm | carbon |
| Chainrings / Sprocket | SRAM | X01 Eagle | 12spd |
| Bottom Bracket | Race Face | PF92 | |
| Chain | SRAM | X01 Eagle | 12spd |
| Cassette / Rear Cog | SRAM | X01 Eagle | 12spd |
| Pedals | Other | Tatze | titanium |
| Front Rim | Other | Ibis 942 Carbon | |
| Rear Rim | Other | Ibis 942 Carbon | |
| Hubs | Industry Nine | Torch | |
| Spokes | Sapim | CX-Ray | |
| Front Tire | Schwalbe | Magic Mary Addix Soft | |
| Rear Tire | Schwalbe | Magic Mary Addix Soft | |
| Saddle | Joystick | Analog Carbon | |
| Seatpost | 9point8 | Fall Line 190mm | |
| Seatpost Clamp | Other | Knolly |
| General Info | ||
| Model Year | 2019 | |
|---|---|---|
| Riding Type | Trail / All-Mountain | |
| Weight | 31 lb 11.9 oz (14400 g) | |
| Additional Info | twenty Niner ready for some Enduro Races, with some rare components equipped. Very beautiful colourscheme, I love it! | |
9 comments
More Bike Checks
Most Popular
- @cache_main: f6cc529e9fa6ee70c61915363616d8c4
creg
11/25/2018 10:44 PM
Great build, much want! Is that a 150mm or 160mm fork?
bike.insel
11/25/2018 11:58 PM
160mm. Well, I sell such beautiful custom bikes... just contact me if you are interested
Thanks
KeenoExtremo
11/22/2018 5:13 PM
Sick build dude! However I think you need to flip your RF cinch ring to get the right chainline for the 157mm Hub
bike.insel
11/25/2018 8:27 AM
I ran also pivot switchblade or Mondraker crafty, both 157x12, with normal chainring, with Sram or race Face.. Both ok.
KeenoExtremo
11/26/2018 12:08 AM
What cassette cog does your chaining allign to? It should be in the middle, around 6th. You are running a small ring, but if you ran a larger ring I don't think it would fit the way you have it.
Both Raceface and knolly recommend you run the ring flipped, I have a fugitive set up that way and it works much better ?
bike.insel
11/26/2018 2:12 AM
Well, all I can say is that it ran smoothly with a 11.46 Shimano cassette and 30z front chainring on the Switchblade.... Here for this Fugitive I might take more experience on the trail.
By the way, I build lots of bikes with normal non boost cranksets on a boost rear dropout. This runs even better than using a boost crankset on boost dropouts....
bike.insel
11/22/2018 10:49 AM
Thanks iceman2058
Wfo922
11/22/2018 8:28 AM
Sick build!
iceman2058
11/22/2018 5:25 AM
Bike of the Day November 22, 2018!