If you know someone who know someone who may need someone like me to help design and make bikes for a great bike company, let me know 😉
If you know someone who know someone who may need someone like me to help design and make bikes for a great bike company, let me know 😉
This setup has 8 comments.
More conventional chainstays have a really slim tube area near the chainring. This tube area is always really thin to clear the chainring rotation, allow enough tire clearance, and reduce the chainstay length as much as possible. With elevated chainstay the tube comes from the top of the chain and so does not require to have such a small section. That’s something I realized by going through the design of it.
Plus the chain don’t have to be broken to be removed
Glad you like it !
This setup has 8 comments.
I have no video, but you can see the molds and one half of the swingarm pictures I just added
This setup has 8 comments.
Really good one ! Good discussion
Well a lab that size would be big enough for a one frame per day mini factory, dream place
This feature has 3 comments.
Hey Vital members, Not posting so much on forums, but found this introduction area really cool, so decided to tell a bit more about me. I regularly navigate into forums and social media but more as a spectator. I’m Anthony, live in France and ride since ... more »
Thanks for your comment,
Just add a picture where you can see the symmetry line. That was hard to have the chevrons properly aligned...
This setup has 12 comments.
SC V10+ SC Bullit
Swipe right in the pictures, just add the geo chart.
The CAD is from end of 2016, not the current trends... but this ride fine and fast enough really
This setup has 12 comments.
Liked a comment on the item MONOTRACE - First prototype - XXL Trail bike - homemade 8/22/2020 3:38 AM
Nicely done