Accessibility Settings: On | Off
Added reply in a thread Bike design as a hobby 5/3/2020 9:23 PM

I have. seat tube length is 410mm. Should fit a 185mm or longer dropper for me being 6ft

Started new thread Bike design as a hobby 5/2/2020 7:27 PM

Having a lot of free time during the lockdown had me itching to design another bike. Here is the result. Almost the same geometry as the first one. 475mm reach 110mm head tube length 436mm chainstay length 80 degrees seat angle 63.5 head angle 200mm/210mm

... more »

This forum thread has 4 replies

Added a comment to _Lan's bike check 2/21/2020 11:00 PM
Tikbalang MK1 Titanium Downhill Enduro bike

Update:

Couldn't get on with the EXT Storia. Felt harsh no matter what permutation of settings I use. Bought a Fox X2, started at 25% sag with 4 volume spacers and factory recommended setting and it's already so much better. Maybe the EXT has a very aggressive compression tune.

0 0 0

This setup has 16 comments.

Added reply in a thread Why are there still no 200mm+ Enduro bikes? 3/3/2020 7:35 PM

Thanks, it was a small financial risk and it turned out well in the end. Got the bike I've always wanted based on my current understanding of suspension kinematics and experience with bike geometry. Climbed with the bike again today to get to the trail ... more »

Added reply in a thread Why are there still no 200mm+ Enduro bikes? 3/3/2020 2:31 PM

Canfield one.2 Canfield just released the one.2. They're marketing it as a pedalable downhill bike. Seat angle looks great for seated pedaling hopefully not too much kickback on a wide range cassette.

Added reply in a thread Why are there still no 200mm+ Enduro bikes? 2/27/2020 2:15 AM

Just did a 30km xc/all mountain ride with 900 meters of elevation. Kept up with an xc guy on a hardtail on steep fire roads too. Really feel a properly designed downhill bike with compromises for climbing can work as a quiver killer Maybe not for everyone ... more »

Added reply in a thread Why are there still no 200mm+ Enduro bikes? 2/25/2020 10:11 PM

I'm just saying I couldn't get my particular shock to play nicely with the bike. Tried different springs, 0-1 preload, started at the middle on the clickers and used bracketing, never got it to feel good. The bike isn't exactly a production frame so ... more »

Started new thread Why are there still no 200mm+ Enduro bikes? 2/24/2020 11:42 PM

So I designed this thing, a 205-220mm travel (currently at 215mm) Downhill bike. I've been riding it almost everyday since I was able to tune the suspension to my liking (ditched the harsh EXT for an X2). It performs very nicely as a downhill ... more »

This forum thread has 61 replies

Liked a comment on the item Tikbalang MK1 Titanium Downhill Enduro bike 2/21/2020 10:52 PM

Amazing bike man. love love titanium noway the bike will brake. Nothing better than Shimano xtr.

Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 2/21/2020 10:51 PM
Tikbalang MK1 Titanium Downhill Enduro bike
Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 2/21/2020 10:51 PM
Tikbalang MK1 Titanium Downhill Enduro bike
Added a comment about press release Custom Spec Options, Carbon, Alloy, and Both Wheel Sizes: the 2020 Propain Tyee Is Here 1/15/2020 2:35 PM
_Lan

The axle path's x values look wrong

0 0 0

This press release has 6 comments.

Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 1/4/2020 4:55 AM
Tikbalang MK1 Titanium Downhill Enduro bike
Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 1/4/2020 4:55 AM
Tikbalang MK1 Titanium Downhill Enduro bike
Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 1/2/2020 9:17 PM
Tikbalang MK1 Titanium Downhill Enduro bike
Updated bike check Tikbalang MK1 Titanium Downhill Enduro bike 1/2/2020 9:17 PM
Tikbalang MK1 Titanium Downhill Enduro bike
Added a comment to _Lan's bike check 12/31/2019 1:13 AM
Tikbalang MK1 Titanium Downhill Enduro bike

Thanks for the nice words guys and thanks for the feature Vitalmtb.

I designed the bike but left the fabrication to the experts. It would be prohibitively expensive to do it myself.

Been busy with work and the holidays lately so have little time to test and setup the bike.

First time to test it the idler pulley bearing which had ceramic coated balls but plastic races broke on the 2nd lap before I even had the chance to make adjustments to the suspension.


2nd time to test I changed the bearing to a steel one and it held up. The bike felt good even in the tight switchbacks and didn't feel cumbersome at all. But it was a trail that I rarely go to and it also didn't have the rough rocky square edge hits that might show the advantages of a rear axle path and 29er wheels. Altough a fast youngster did say he liked it after taking it out for a lap so that's encouraging.

Finally, going to test it on the new year on a trail I'm familiar with which also have the rockies that will favor this kind of bike. I'm also slowly building up the speed. Checking the pivots and welds after every run and trying to feel what the bike is doing before committing 100% just to be safe. Also have a 27.5 tues to compare to.

This setup has 16 comments.

Liked a comment on the item Tikbalang MK1 Titanium Downhill Enduro bike 12/30/2019 8:26 PM

Nice work bro!

Liked a comment on the item Tikbalang MK1 Titanium Downhill Enduro bike 12/30/2019 8:25 PM

As a novice frame builder myself, id say NEVER talk down of yourself smile
Id like to give you a big FUCK YEAH!!!!!!
Its my dream to start building enduro bikes!