Accessibility Widget: On | Off

Dave_Camp's Forum Activity

Reply to 2007 Yeti 303 6/19/2013 9:07 AM

I'd say no... those bikes are heavy and have a lot of maintenance issues- the cars/tracks wear out and there are about 50 bolts holding everything together. Also I believe they are more of a plow bike. Pass. I would look for something more simple and ... more »

Reply to American MADE Downhill Bikes 9/6/2012 6:25 PM

TREK. The Session 9.9 frames are still made in good old Wisconsin.

Reply to Nostalgic and Old School Photos 10/17/2011 6:40 PM

Reply to danny hart's slalom run jammed up? 4/25/2011 7:17 PM

Then did you hit him in the chest with a rake? you should have.

Reply to new home-made gearbox bike thing 12/8/2010 11:55 AM

Quote: Nice creativity. Any torque or bolt breaking issues with the rear cog and disc being bolt onto the same side of the hub? -Not yet; the disc is in direct contact with the hub flange, so it should be good, and I haven't had any issues with the cog ... more »

New thread new home-made gearbox bike thing 12/7/2010 4:31 PM

I finally finished my project bike... it rides pretty good!

The bike uses an 8-speed Shimano Alfine geared hub fit in between 83mm shell Saint cranks, a 20mm through axle front wheel as the rear wheel and tomicogs on the ... more »

This forum thread has 14 replies.

Reply to Port Angeles ProGRT 3/29/2010 7:12 PM

they run budget trucks, but its not too bad as long as it rains a little so there is no dust, and with the lights on you don't get too sea-sick.

Reply to lets see those rides! post your bike! 12/16/2009 11:17 AM

on the way to fluidride #5 now stripped and internal cables ... more »
Reply to Play Now - VitalOTB World Champs - Win an Evil Hardtail Frame! 8/25/2009 11:12 AM

1. Nathan Rennie 2.45.67 2. Steve Peat 2.46.32 3. Mick Hannah 2.46.54 1. Tracey Mosely 2.59.88