Prototype PUSH Fox 34 Conversion Kit 22

Dyno vids are always cool! Check out this prototype PUSH conversion kit for your Fox 34.



Here is the somewhat ambiguous tease from Darren Murphy of PUSH ...
So the Enduro thing is all the rage these days... I wonder what would happen if we machined a new air top cap and gave these riders the ability to adjust the air volume? Interesting..... What if we then added a conversion kit for the damper based on our successful MX-Tune platform for FOX shocks giving them external High and Low Speed Compression adjustment replacing the CTD top cap? We still need to make fork specific compression knobs to clean it up, but this is one slick 34mm 160mm travel Enduro raging fork! Ta-dah!

Create New Tag

sspomer's videos

22 comments
  • bliz2z

    8/14/2013 1:38 AM

    Available by? I need one for Trans Provence in September please

  • erikthefatty

    8/14/2013 9:05 PM

    Not to detract from Push, but since it looks like you're looking for a solution soon, Avalanche has a rebuild/conversion kit.
    http://www.avalanchedownhillracing.com/Fox%2040/Fox%2034%20Open%20Bath%20Cartridge%20Kit.htm

  • erikthefatty

    8/14/2013 9:06 PM

  • jecc.terr

    8/13/2013 6:14 PM

    will this be compatible with a Talas? and what's the link for this conversion kit from your site? thanks!

  • PUSH Industries

    8/13/2013 9:08 PM

    Yes we will be offering a Talas version. As for a link, there isn't one yet as we are just finishing up the details.

  • beaverbiker

    8/13/2013 3:53 PM

    So the damper is better but too bad you still have that crappy Fox chassis to deal with. Just polishing a turd at this point.

  • Nixgame22

    8/14/2013 9:06 AM

    What don't you like about the Chassis?

  • Ian Collins

    8/13/2013 3:37 PM

    Sort of like the pikes air volume? The bottomless red thingies?

  • PUSH Industries

    8/13/2013 4:01 PM

    Yes, it's similar. You have to remove the air cap to change the volume chip.

  • 'size

    8/13/2013 2:00 PM

    let me know when the hi/lo comp will replace the CTD in the rear shock. why do manufacturers have such an issue with real compression adjustments for rear air shocks designed for trail use?

  • general lee

    8/13/2013 9:51 PM

    Easier to manufacture, and nice a dumbed down for the masses so the average bike shop employee can understand it enough to explain it t the average consumer. It's all about selling, not riding.

  • PUSH Industries

    8/13/2013 12:35 PM

    Some of the older FOX forks definitely had pretty progressive air springs but the new generation left side air assembly is quite linear. That's why we're offering a 5cc, 7.5cc, and 10cc volume reduction kit so that end users can fine tune it to their liking and riding style.

  • yeahdude1976

    8/13/2013 12:39 PM

    Oh... So it's not an external volume adjustment. set it and forget it. That's cool too.

  • yeahdude1976

    8/13/2013 11:21 AM

    I didn't think Fox forks had enough volume in the air spring as it is... So, do we have to do the air spring mod first to make the volume adjustable cap worthwhile?

  • kenneth.jonathan.perkins.jr

    8/13/2013 11:09 AM

    Pls make one for the 29er 140mm TALAS.......please!!!

  • PUSH Industries

    8/13/2013 2:19 PM

    The damper kit will fit into any 34mm CTD fork.

  • Marshall Willanholly

    8/13/2013 3:34 PM

    CTD only?

  • PUSH Industries

    8/13/2013 4:02 PM

    At this point.....

  • allan.beckett.14

    9/8/2013 8:22 AM

    Hi

    Will you be offering a tuning kit for the 831 for as mine seems to blow through the travel and the rebound is savagely harsh.

    Thanks

  • kenneth.jonathan.perkins.jr

    8/14/2013 3:33 AM

    When will it be available for purchase?

  • jaywash521

    7/22/2015 12:25 PM

    So the left fork cap will replace the travel adjust cap on a Talas? Or do the chips work with the existing cap?

  • knarrr!

    8/13/2013 10:45 AM

    ...and suddenly the Fox 34 becomes relevant