- 4106 ParabellumShane http://p.vitalmtb.com/photos/users/4106/avatar/c50_sdr2_1385768238.jpg?1385767274 http://www.vitalmtb.com/community/ParabellumShane,4106/all 08/19/10 1 2 4 7 42 23
- 6576 Big Bird http://p.vitalmtb.com/photos/users/6576/avatar/c50_SmileySmall.jpg?1320728633 http://www.vitalmtb.com/community/Big-Bird,6576/all 02/01/11 6 39 784 2305 13
- 270 Mountain Jerk http://p.vitalmtb.com/photos/users/270/avatar/c50_IMG_3214.jpg?1314661426 http://www.vitalmtb.com/community/Mountain-Jerk,270/all 08/02/09 1 7 3 1 6 5 1
- 20494 PhluffheadPhanner http://p.vitalmtb.com/photos/users/20494/avatar/c50_p5pb7822729.jpg?1356990355 http://www.vitalmtb.com/community/PhluffheadPhanner,20494/all 12/19/12 1 17
Jamis Parker pivot bushings & such???
Anybody know where to find pivot bushings & bearings for an 09 Jamis Parker????
Can we assume that you've already contacted Jamis?
I know where to find an 09 Jamis Parker for sale...
I don't get it. What do you mean by "This?". Was that a typo?
No, no typo. I was more reiterating your original post. By saying "This?' I was more or less asking the same question that you originally asked.
Big Bird wrote: I don't get it. What do you mean by "This?". Was that a typo?
@ Phluff. Ah, yes yes, just so. Back to the original topic. If you can't get them from Jamis anymore, which would be pretty lame for a bike company, you can find almost anything at McMaster Carr. It's an industrial supply company. Remove the old parts and CAREFULLY measure all of the dimensions, as in with calipers, down to the thousandth on an inch, or millimeter. Then go to McMaster Carr and go through the lists until you've found the exact bits of the right material and dimensions. All the options they offer can get a bit confusing. But eventually you'll get there. The bearings, by the way, have a little code on the plastic seals that designates the dimensions.