- 20494 PhluffheadPhanner http://p.vitalmtb.com/photos/users/20494/avatar/c50_p5pb7822729.jpg?1356990355 http://www.vitalmtb.com/community/PhluffheadPhanner,20494/all 12/19/12 1 17
- 109 bturman http://p.vitalmtb.com/photos/users/109/avatar/c50_twitter3_1382472127.jpg?1382471385 http://www.vitalmtb.com/community/bturman,109/all 08/01/09 925 92 5040 1032 231 962 1920 98 40
- 4438 Colin McCarthy http://p.vitalmtb.com/photos/users/4438/avatar/c50_db10d676144f365098026375af5e1e56_full_1424141999.jpg?1424141992 http://www.vitalmtb.com/community/Colin-McCarthy,4438/all 09/12/10 1 1 2 41 95
- 6576 Big Bird http://p.vitalmtb.com/photos/users/6576/avatar/c50_SmileySmall.jpg?1320728633 http://www.vitalmtb.com/community/Big-Bird,6576/all 02/01/11 6 39 780 2293 13
Bottom Bracket won't budge
Yeah thats along the lines I was thinking. I've also read somewhere to heat the shell, to loosen up the BB? I don't really think thats a great idea. Also at my work we have a pneumatic ratchet gun that I could use, but part of me fears breaking my shell with too much torque.
bturman wrote: Soak the threads with a thread unlocker of some variety (WD-40 may work), then try getting some more leverage on that sucker by putting a pipe or something on the end of your bb tool/wrench.
Yeah I know about the treading and what not. Looks like I get to run to the hardware store sometime tomorrow when my hangover clears...Oh New Years. But I hadnt really thought about putting some lubricant down the seat post so thanks for the help there!
Colin McCarthy wrote: Liquid Wrench works well for that stuff. Spray some down the seat tube so it can soak into the BB shell and tap on the shell with the handle of a screwdriver. Allow it to penetrate for some time and with many screwdriver tappings for best results. Use a bolt that is of the same thread pattern as your crank bolt but longer, to secure the BB tool [one that has wrench flats] to the BB. Don't forget that the drive side of the BB shell is a left hand thread, so it turns clock wise to loosen. Hope that helps!
Yeah somewhat I figured. I can always return the BB to CRC I think? I'll go with 113 and see how it works out
Big Bird wrote: Someone still makes a square tapered BB? If they say 113, go with a 113 unless your frame has some kind of chain line issue. It always used to seem like I had to try a few sizes to find the right combo.